Grimm Audio UC1 Bruksanvisning

Grimm Audio Inte kategoriserad UC1

Läs gratis den bruksanvisning för Grimm Audio UC1 (38 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8.5 recensioner. Har du en fråga om Grimm Audio UC1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/38

Mixing and mastering requires a point of reference.

A modern workow demands for a tailored setup.

UC1: the Swiss army knife of .high quality monitoring

Please read this manual before operating the unit.

Manual UC1 © Grimm Audio

Table of Contents

1. Introduction 3

2. Important Safety Instructions 5

3. Installing 7

4. Signal Connections 9

5. Operation 14

6. Menus 27

7. Specications 34

8. Grimm Audio Limited Warranty 36

Table of Contents

Manual UC1 © Grimm Audio 3

1. Introduction

The UC1 “Universal Converter” combines an 18 I/O

channel USB interface with a versatile monitor

controller. It oers broad functionality for mixing and

mastering at very high audio quality level, in a compact

box. Please read this manual before using the UC1 to

understand its operation and make optimal use of its

versatility.

Applications

The number of application examples for the UC1 is

endless. Its main intended use however is to function as

the center piece of a modern mixing or mastering setup

in a professional audio studio. Let’s have a look at how

to use the various inputs and outputs in this context.

The back USB is connected to your DAW computer. A

main monitor loudspeaker can be connected to one of

three options: the digital RJ45 Grimm LS1 / PMC 1

connector, an analog XLR pair, or the digital AES3 XLR

output. In the menu you select to which output your

main monitor is connected. A secondary smaller

loudspeaker system can be connected to a dedicated

XLR output pair that runs in parallel to the headphone

output on the front that oers a third monitor option.

Several monitor tools such as mono, side and stereo

swap are available.

Next to the monitor paths, the UC1 oers a stereo

analog and a stereo digital eect loop. Through these,

outboard gear can be used in your DAW project. Audio

levels can be monitored on a special meter display with

high res peak meters.

Furthermore the UC1 oers inputs that can be used for

recording into your DAW or just for monitoring. These

are a second stereo digital input on the back, a stereo

analog jack input on the front and a second USB input

on the front, called ‘i-put’. The stereo jack input has high

input impedance, so it is equally well suited for

1. Introduction

1The UC1 needs to reboot in PMC mode to send the right

instructions to your digital PMC loudspeaker. Please read

chapter 4 Signal Connections, under “On the back” for

instructions about how to boot the UC1 in PMC mode.

Produktspecifikationer

Varumärke:	Grimm Audio
Kategori:	Inte kategoriserad
Modell:	UC1
Färg på produkten:	Zwart
Vikt:	1700 g
Bredd:	559 mm
Djup:	19 mm
Höjd:	368 mm
Förpackningens vikt:	2300 g
Förpackningens bredd:	622 mm
Djuppackning:	57 mm
Förpackningshöjd:	622 mm
Monteringsmetod:	Muur
Maximal viktkapacitet:	45.5 kg
Antal per paket:	1 stuk(s)
Kompatibilitet:	DS-MBZ642L, DS-MBZ647L, DS-MBZ647P
Kompatibilitet med monteringsgränssnitt (min):	- mm
Kompatibilitet med monteringsgränssnitt (max):	- mm
Antal skärmar som stöds:	1
Typ produkt:	Wandplaat
Maximal skärmstorlek:	48 "
Harmoniserad systemkod (HS):	85299097
Minsta skärmstorlek:	40 "