Hager EZN004 Bruksanvisning
Hager Inte kategoriserad EZN004
Läs gratis den bruksanvisning för Hager EZN004 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4 recensioner. Har du en fråga om Hager EZN004 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2

16E 6504.c
6E 6504.c
A2
18 16
A1 15
2
46
8
10
1
0,1s
1s
0,1mn 1mn
0,1h
1h
E
ZN004
EZN004
¢
£
§
•
¶
ß
®
©
FR
DE
T
IN (B1)
OUT
(15 - 18)
LED
GB
Notice d’instructions
Relais temporisé
calibreur d’impulsion
Bedienungsanleitung
Impulsformer
User instructions
Timer
12 3
2
46
8
10
1
0,1s
1s
0
,1mn 1mn
0,1h
1h
EZN002
0,1s
1s
0,1mn 1mn
0,1h
1h
2
4 6
8
101
LED
Gebruiksaanwijzing
Verklikker met
asymmetrische regeling
NL
L / +
N / -
18
A1
16
15
A2 B1
1618
IN
15
4
EZN004
Pouvoir de coupure min. :
100 mA / 12 V
Température de fonctionnement :
-10 °C... +50 °C
Température de stockage :
-20 °C... +70 °C
Capacité de raccordement :
souple :1 □...6 □
rigide :1,5
□...10 □
Raccordement électrique
➃alimentation en12 à 230 V 쓒
12 à 48 V
Nota :n’est pas destiné à être connecté à un
circuit d’alimentation de sécurité à très basse
tension (TBTS).
Spécifications techniques
Alimentation :
entre A1 et A2 :12 à 230 V +10% -10%쓒
12 à 48 V+10% -10%
Tension de commande : idem alimentation
Fréquence :50/60 Hz
Sortie :1 inverseur libre de potentiel
Pouvoir de coupure max. :
AC1 : 8 A / 230 V 50 000 cycles
Incandescence : 450 W 50 000 cycles
Fluo non compensé : 600 W 50 000 cycles
Charge inductive cos φ0,6 : 5 A 100 000 cycles.
Minimale Schaltleistung:
100 mA / 12 V
Umgebungstemperatur:
-10 °C... +50 °C
Lagerungstemperatur:
-20 °C... +70 °C
Anschlußkapazität:
mehdrähtig:1 □...6 □
eindrätig:1,5 □...10 □
Elektrischer Anschluß
➃Spannung von12 bis 230 V 쓒
12 bis 48 V
Anmerkung: nicht geeignet zum Anschluss an
Sicherheitkleinspannungskreise (SELV).
Technische Daten
Versorgungsspannung:
zwischen A1 und A2:12 bis 230 V +10% -10%쓒
12 bis 48 V+10% -10%
Steuerspannung: gleich Verzorgungsspannung
Frequenz: 50/60 Hz
Ausgang:1 Wechsler potentialfrei
Schaltleistung:
AC1: 8 A / 230 V 50 000 Zyklen
Glühlampen: 450 W 50 000 Zyklen
Leuchtstofflampen: 600 W 50 000 Zyklen
Induktive Last cos φ0,6: 5 A 100 000 Zyklen.
Min. breaking capacity:
100 mA / 12 V
Working temperature:
-10 °C... +50 °C
Storage temperature:
-20 °C... +70 °C
Connection capacity:
flexible:1 □...6 □
rigid:1,5
□...10 □
Electrical connection
➃supply from12 to 230 V 쓒
12 to 48 V
➄supply from12 Vand 쓒
Note: not suitable to be connected to a safety
extra low voltage(SELV) circuit.
Technical specifications
Supply:
between A1 and A2:12 to 230 V +10% -10%쓒
12 to 48 V+10% -10%
Control voltage: identical to the supply
Frequency:50/60 Hz
Output:1 volt free changeover contact
Max. capacity:
AC1: switching 8 A / 230 V 50 000 cycles
Incandescent lights: 450 W 50 000 cycles
Non compensated fluorescent: 600 W 50 000 cycles
Inductive load cos φ0,6: 5 A 100 000 cycles.
➀Diagramme de fonctionnement
IN : commande
OUT : sortie
Signification du clignotement de la LED :
-relais de sortie ouvert, pas de
temporisation en cours
-relais de sortie ouvert, temporisation en
cours
-relais de sortie fermé, pas de
temporisation en cours
-relais de sortie fermé, temporisation en
cours.
Réglage de la temporisation
De 0,1 s. à 10 h.
➁réglage de la gamme de temporisation
➂réglage fin de la temporisation
La position du sélecteur ➁multipliée par la
valeur indiquée par le potentiomètre ➂=
temporisation T.
Exemple :T = 0,1 min. x 7 (0,1 min. = 6 s.)
T = 6 s. x 7 = 42 s.
➀Funktionsdiagramm
IN: Steuerung
OUT: Ausgangzustand
Funktionsanzeige durch LED:
-Ausgang im Ruhezustand, kein
Zeitablauf
-Ausgang im Ruhezustand, Zeit läuft
-Ausgang im Arbeitszustand, kein
Zeitablauf
-Ausgang im Arbeitszustand, Zeit läuft.
Einstellung der Verzögerungszeit
Von 0,1 s. bis 10 h.
➁Einstellung des Verzögerungsbereiches
➂Feineinstellung der Verzögerungszeit
Die Position des Verzögerungswahlschalters ➁
multipliziert mit der Potentiometer-
einstellung ➂= VerzögerungszeitT.
Beispiel:T = 0,1 Min. x 7 (0,1 Min. = 6 s.)
T = 6 s. x 7 = 42 s.
➀Working diagram
IN: control
OUT: output
Reason of the LED flashing:
-output relay open, time delay inactive
-output relay open, time delay active
-output relay closed, time delay inactive
-output relay closed, time delay active.
Time delay setting
From 0,1 s. to 10 h.
➁time setting
➂multiple of time setting
The position of the selector ➁multiplied by the
value indicated on the potentiometer
➂gives the
value of the delay T.
Example:T = 0.1 min. x 7 (0.1 min. = 6 s.)
T = 6 s. x 7 = 42 s.
Min. scheidingsvermogen:
100 mA / 12 V
Werkingstemperatuur:
-10 °C... +50 °C
Stockagetemperatuur:
-20 °C... +70 °C
Ansluiting:
soepele: 1 □...6 □
stijve: 1,5 □...10 □
Elektrische aansluiting
➃voeding12 tot 230 V 쓒
12 tot 48 V
Nota: mag niet aangesloten worden op een
veiligheidsvoedingskring metzeer lage
spanning (ZLVS).
Technische specificaties
Voeding:
tussen A1 en A2:12 tot 230 V +10% -10%쓒
12 tot 48 V+10% -10%
Frequentie:50/60 Hz
Uitgang:1 omschakelaar vrij van potentieel
Max. scheidingsvermogen:
AC1: 8 A / 230 V 50 000 cyclussen
Gloeilamp: 450 W 50 000 cyclussen
Fluo niet gecompenseerd: 600 W 50 000 cyclussen
Inductieve belasting cos φ0,6: 5 A 100 000
cyclussen.
➀Werkingsdiagram
IN: bediening
OUT: uitgang
Verklaring van het knipperen van de LED:
-uitgangsrelais open, tijdinstelling niet
geactiveerd
-uitgangsrelais open, tijdinstelling
geactiveerd
-uitgangsrelais gesloten, geen
tijdinstelling geactiveerd
-uitgangsrelais gesloten, tijdinstelling
geactiveerd.
Regeling van de tijdinstelling
Van 0,1 s. tot 10 u.
➁regeling van het gamma van tijdinstelling
➂fijnregeling van de tijdinstelling
De stand van de keuzeschakelaar ➁vermenigvul-
digd met de door de potentiometer aangegeven
waarde ➂= tijdinstelling T.
Voorbeeld:T = 0,1 Min. x 7 (0,1 Min. = 6 s.)
T = 6 s. x 7 = 42 s.
Produktspecifikationer
| Varumärke: | Hager |
| Kategori: | Inte kategoriserad |
| Modell: | EZN004 |
Behöver du hjälp?
Om du behöver hjälp med Hager EZN004 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Hager Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
1 April 2025
Inte kategoriserad Manualer
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025