Hähnel Viper TTL Receiver Bruksanvisning

Hähnel Flash Viper TTL Receiver

Läs gratis den bruksanvisning för Hähnel Viper TTL Receiver (2 sidor) i kategorin Flash. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7 recensioner. Har du en fråga om Hähnel Viper TTL Receiver eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

IRL/UK: Set up

The “Viper TTL receiver” is used together with “Viper TTL transmitter” or “Modus

600RT”.

• Attach Speedlight to <hot shoe> 10 of the Viper TTL receiver. Using the slide

switch 16 select one of the group A, B or C for this receiver. Turn on 12 the

Viper TTL receiver which will give a green ashing light 11 to indicate power

is on. Turn on the Speedlight. Press <Test> button 15 on receiver to conrm

Speedlight is working

• Using the cable socket 14 a studio light can be connected to the Viper TTL

receiver via a “Hähnel Studio Light Cable” which is available as a separate

accessory

• Unlimited numbers of Speedlights / studio lights with Viper TTL receivers can

be allocated to one or different groups

• For “Nikon” version, set the Nikon Speedlight to <i-TTL> mode

DCM Digital Channel Matching

• Open channel - When you use the Viper TTL for the rst time, the 2.4GHz

wireless connection is using a default “open channel”. This allows several

transmitters to individually control the same selection of receivers. The “open

channel” can be useful when using several cameras with the same lighting

system. But it is also more prone to other outside interferences

• DCM - Digital Channel Matching is a more secure coded wireless system

which will avoid any external interference between Viper TTL transmitter and

receiver. Carry out the following set up to match all your devices

• A - Turn off both Viper TTL transmitter and receiver

• B - <Test> button Hold down on the transmitter and turn ON “transmitter”.

LED on the transmitter will ash rapidly, release the test button and LCD on

the transmitter will display “coding”

• C <Test> button- Now hold down receiver

15 and turn ON 12 “receiver”. The

LED 11 will ash green rapidly. Release <Test> button 15. The LED 06 will

change to red ON all the time conrming DCM is completed

• D - If you have additional Viper TTL receivers, then repeat stage “C”. (Viper

TTL transmitter must still be in “coding”)

• If you are using the Viper TTL in combination with the hähnel Modus 600RT

Speedlight, you can still DCM all devices. Use the same procedure from A to D and

then also DCM match the Modus 600RT as a slave version as explained in Modus

manual

• It is possible to reset the Viper TTL transmitter and receiver to “open channel”

• Hold down <Test> button on transmitter and turn ON transmitter and continue to

hold down button on transmitter for more than 5 sec. LED on transmitter will change

from rapid ashing to always ON. Transmitter is now “open channel”

• Now hold down receiver <Test> button 15 and turn ON receiver and continue to

hold down button 15 for more than 5 sec. LED 11 will change from rapid ashing to

always ON. Receiver is now “open channel”

• If you wish to use old 3rd party Speedlight’s which are not E-TTL or i-TTL compatible,

then set switch 16 to Group “C” whilst performing the reset of the Receiver to “open

channel”. This allows 3rd party Speedlight’s to be triggered in Speedlight “M” mode.

Check our website www.hahnel.ie for more info

hähnel

/MODUS 600RT

GROUP A

hähnel

/MODUS 600RT

GROUP B

Viper TTL

Transmitter

MASTER

Viper TTL RX with

3rd Party Speedlight

GROUP C

Set up

Quick Start

Guide

Receiver

Viper TTL Receiver Controls

15 14 13 11

Receiver

(10) Hot shoe

(11) Power / Status LED

(12) ON/OFF Switch

(13) Micro USB - rmware update

(14) Remote control cable socket

(15) Test Button

(16) Group A / B / C switch

hähnel

/MODUS 600RT

GROUP A

hähnel

/MODUS 600RT

GROUP B

Viper TTL

Transmitter

MASTER

Viper TTL RX with

3rd Party Speedlight

GROUP C

Set up

Produktspecifikationer

Varumärke:	Hähnel
Kategori:	Flash
Modell:	Viper TTL Receiver
Färg på produkten:	Black, White
Vikt:	14061 g
Original bildförhållande:	4:3
Monteringsmetod:	Muur
Diagonal:	84 "
Skärmens totala storlek (höjd x bredd):	128 x 170 cm
Formatera:	Video