Haier HP330M1-U1 Bruksanvisning
Haier
Vattenpump
HP330M1-U1
Läs gratis den bruksanvisning för Haier HP330M1-U1 (14 sidor) i kategorin Vattenpump. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Haier HP330M1-U1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/14
Heat Pump Water Heater
Controller Operation Guide
Models:
HP200M1-U1
HP250M1-U1
Power ON/OFF.
Mode selection. Press the MODE key to switch
between the four working modes of AUTO, ECO,
ELEC, and VAC.
Adjust the clock settings. Set the time of day in
hours/minutes.
Used to set timer functions/confirm changes to
settings.
Set the temperature and time. Press and hold
for continuous adjustment.
Turns a one-time boost heating function on or
off, using both the heat pump and back-up
electrical element, decreasing the heating time.
The heat pump will operate at any time to
provide hot water when the demand is required.
Operates the heat pump to provide hot water
only during the “off-peak” power period or
when there is an off-peak power signal. Manual
set time, Automatic off-peak signal or
Photovoltaic solar supplementary.
Will only use the electrical element for heating.
This function should only be used if there is a
fault with the heat pump module so that hot
water can be supplied to the user.
Vacation mode: Maintains a minimum water
temperature to save power, then reheats the
water in advance of the return date set by the
user.
Anti-Legionella, sterilizes your stored water
against Legionella, the service will automatically
turn on once every 7 days and raise the
temperature to 65°C, or as user defined.
Stored water temperature display. Bars indicate
temperature variations only and not water
volume.
Heat pump in operation indicator.
Electric heating in operation indicator.
HC
Switching signal of the power supply is active.
PV
Supplementary photovoltaic (PV) solar power
supply signal is active.
Lock screen display icon.
Start Up Controls
This guide is designed to better explain the controls and operation of the basic modes currently
available to you with your Heat Pump Water Heater.
01. Temperature and Time
02. AUTO mode (Automatic operation)
03. ELEC mode (Electric element)
04. VAC mode (Vacation)
05. BOOST function
06. Lock screen
07. Service mode (advanced settings)
08. Fault codes (advanced settings)
01. Temperature and Time
01.1 Temperature
1. Turn on the appliance by pressing the key if in Standby, otherwise disregard this step.
_
2. Press the + or – keys to adjust the temperature in 1℃ increments until the desired temperature is reached.
Note: A minimum of 60℃ is recommended for stored hot water to help prevent undesirable bacteria.
_ _
3. Once the desired set temperature is displayed, the settings will be confirmed after 6 seconds of keyless
operation and you will return to the operational mode.
01.2 Time
1. Turn on the appliance by pressing the key if in Standby, otherwise disregard this step.
_
2. Press the TIMER key until the display shows the hours flashing “00:00.”
_ _
3. Press the + or – key to adjust the 24 hour time.
_ _ _
4. Press the TIMER key until the display shows the minutes flashing “00:00.”
_ _ _ _
5. Press the + or – key to adjust the minutes.
_ _ _ _ _
6. Once the current time is displayed, the settings will be confirmed after 6 seconds of keyless operation and you
will return to the operational mode.
Produktspecifikationer
| Varumärke: | Haier |
| Kategori: | Vattenpump |
| Modell: | HP330M1-U1 |
Behöver du hjälp?
Om du behöver hjälp med Haier HP330M1-U1 ställ en fråga nedan och andra användare kommer att svara dig
Vattenpump Haier Manualer
26 September 2025
Vattenpump Manualer
- Kranzle
- Zoeller
- For_Q
- Emko
- Makita
- Flotide
- Trotec
- Intex
- Vetus
- Mitsubishi
- Wingart
- Generac
- Metabo
- OKAY
- De Dietrich
Nyaste Vattenpump Manualer
26 September 2025
25 September 2025
25 September 2025
25 September 2025
22 September 2025
22 September 2025
20 September 2025
18 September 2025
15 September 2025
13 September 2025