Haier HW80-BP16636 Bruksanvisning
Haier
tvättmaskin
HW80-BP16636
Läs gratis den bruksanvisning för Haier HW80-BP16636 (96 sidor) i kategorin tvättmaskin. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 7 recensioner. Har du en fråga om Haier HW80-BP16636 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/96

GB
HW80-BP16636
User manual
Washing machine

GB
2
Legend
Warning – Important Safety information
General information and tips
Environmental information
Disposal
Help protect the environment and human health. Put
the packaging in applicable containers to recycle it.
Help to recycle waste of electrical and electronic ap-
pliances. Do not dispose appliances marked with this
symbol with the household waste. Return the product
to your local recycling facility or contact your municipal
offi ce.
Thank you for purchasing a Haier Product.
Please read these instructions carefully before using this appliance. The instructions con-
tain important information which will help you get the best out of the appliance and ensure
safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper
use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure
you also pass this manual so that the new owner can become familiar with the appliance
and safety warnings.
WARNING!
Risk of injury or suff ocation!
Disconnect the appliance from the mains supply. Cut off the mains cable and dispose
of it. Remove the door catch to prevent children and pets to get closed in the appliance.

GB
3
1-Safety information 4 .........................................................................................................................
2-Product description 7 ......................................................................................................................
3-Control panel 8 ..................................................................................................................................
4-Programmes 11 .................................................................................................................................
5-Consumption 12 ................................................................................................................................
6-Daily use 13 .........................................................................................................................................
7-Eco-friendly washing 18 ..................................................................................................................
8-Care and cleaning 19 ........................................................................................................................
9-Troubleshooting 22 ...........................................................................................................................
10-Installation 25 ...................................................................................................................................
11-Technical data 29 .............................................................................................................................
12-Customer service 31 ......................................................................................................................

1-Safety information
GB
4
Before switching on the appliance for the fi rst time read the follow-
ing safety hints!:
WARNING!
Before fi rst use
▶Make sure there is no transport damage.
▶Make sure all transport bolts are removed.
▶Remove all packaging and keep out of children´s reach.
▶Handle the appliance always with at least two persons because it
is heavy.
Daily use
▶This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
▶Keep away children under 3 years of age from the appliance un-
less they are constantly supervised.
▶Children shall not play with the appliance.
▶Do not let children or pets come close to the appliance when the
door is open.
▶Store washing agents out of reach of children.
▶Pull up zips, fi x loose threads and take care for small items to
prevent laundry from being entangled. If necessary, use an ap-
propriate bag or net.
▶Do not touch or use the appliance when barefoot or with wet or
damp hands or feet.
▶Do not cover or encase the appliance during operation or after-
wards to allow any moisture or dampness to evaporate.
▶Do not place heavy objects or sources of heat or damp on top of
the appliance.
▶Do not use or store flammable detergent or dry cleaning agent
in close vicinity to the appliance.
▶Do not use any flammable sprays in close vicinity to the appli-
ance.
▶Do not wash any garments treated with solvents in the appli-
ance without having dried them previously in the air.

GB
1-Safety information
5
WARNING!
Daily use
▶Do not remove or insert the plug in the presence of flammable
gas
▶Do not hot wash foam rubber or sponge-like materials.
▶Do not wash any laundry which is polluted with fl our.
▶Do not open detergent drawer during any wash cycle.
▶Do not touch the door during the washing process, it gets hot.
▶Do not open the door if the water level is visibly over the port-
hole.
▶Do not force the door to open. The door is fitted with a self-
lock device and will open shortly after the washing procedure is
ended.
▶Switch off the appliance after each wash programme and before
undertaking any routine maintenance and disconnect the appli-
ance from the electrical supply to save electricity and for safety.
▶Hold the plug, not the cable, when unplugging the appliance.
Maintenance / cleaning
▶Make sure children are supervised if they carry out cleaning and
maintenance.
▶Disconnect the appliance from the electrical supply before un-
dertaking any routine maintenance.
▶Keep the lower part of the porthole clean and open door and
detergent drawer if appliance is not in use to prevent odours.
▶Do not use water spray or steam to clean the appliance.
▶Replace a damaged supply cord only by the manufacturer, its
service agent or similarly qualifi ed persons in order to avoid a
hazard.
▶Do not try to repair the appliance by yourself. In case of repair
please contact our customer service.
Installation
▶The appliance should be placed in a well-ventilated place. Ensure
a location which allows opening the door fully.
▶Never install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak cut power supply and allow
the machine to dry naturally.

1-Safety information
GB
6
Intended use
This appliance is intended for washing machine-washable laundry
only. Anytime follow the instructions given on the label of each gar-
ment label. It is designed exclusively for domestic use inside the
house. It is not intended for commercial or industrial use.
Changes or modifi cations to the device are not allowed. Unintended
use may cause hazards and loss of of all warranty and liability claims.
WARNING!
Installation
▶Install or use the appliance only where the temperature is above
5 °C.
▶Do not place the appliance directly on a carpet, or close to a wall
or furniture.
▶Do not install the appliance in direct sunlight or in the near of
heat sources(e.g. stoves, heaters).
▶Make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an electri-
cian.
▶Do not use multi-plug adapters and extension cables.
▶Make sure only the delivered electric cable and hose set are
used.
▶Make sure not to damage the electric cable and the plug. If dam-
aged have it replaced by an electrician.
▶Use a separate earthed socket for the power supply which
is easy accessible after installation. The appliance must be
earthed.
Only for UK: The appliance’s power cable is fi tted with 3-cord
(grounding) plug that fi ts a standard 3-cord (grounded) socket.
Never cut off or dismount the third pin (grounding). After the
appliance is installed, the plug should be accessible.
▶Make sure the hose joints and connections are fi rm and there is
no leakage.

GB
2-Product description
7
2.1 Picture of appliance
Front (Fig. 2-1): Rear side (Fig. 2-2):
6
7
5
8
Speed Steam rinse D elay
Cotton
Cotton
Synthetic
Hygienic
Fast
Daily Wash
Delicate/Sil k
Hand Wash
Bedding
Spin
Speed up
Energy Capacity Speed
Express 15 min
Baby Care
Sport
Jeans
Mix
1 3 42
2.2 Accessories
Check the accessories and literature in accordance with this list (Fig.:2-3):
Note:
T1 T2
T3 S1
S2 S4
S3
T4
S5 S6
1 Detergent /
Softener drawer
2 Worktop
3 Programme selector
4 Panel
5 Rating plater
6 Service ap
7 Adjustable feet
8 Door handle
1 Transportation bolts (T1-T4)
2 Back cover
3 Back cover screws (S1-S6)Panel
4 Power cord
5 Water inlet valve
6 Drain hose
Inlet hose-
assembly 5 Blanking
plugs
Drain hose
bracket User manual
Warranty-card
2-3
-

3-Control panel
GB
8
1 “On/Off “ button
2 Programme selector
3 Display
4 Detergent /Softener drawer
3.1 “On/Off “ button
Press this button (Fig. 3-2) gently to switch on, the dis-
play is shining, the indicator of the “Start/Pause” button
is fl ashing. Press it again for about 2 seconds to switch
off . If no panel element or programme is activated af-
ter a while machine will shut down automatically.
3.2 Programme selector
By turning the knob (Fig. 3-3) one of 16 programmes
can be selected, related LED will light up, its default
settings will be displayed.
3.3 Display
The display (Fig. 3-4) shows following information:
▶Washing time
▶End time delay
▶Error codes and service information
3-4
5 Function buttons
6 “Delay” button
7 “Start/Pause“ button
Note : Acoustic signal
In following cases an acoustic signal sounds:
▶when pressing a button
▶when turning the programme selector
▶at the end of programme
▶in case of failures
The acoustic signal can be deselected if necessary ; see DAILY USE.
Cotton+
Cotton
Synthetic
Hygienic
Fast
Daily Wash
Delicate/Silk
Hand Wash
Bedding
Spin
Express 15 min
Baby Care
Sport
Jeans
Mix
3-2
3-3
Speed Steam rinse Delay
Cotton+
Cotton
Synthetic
Hygienic
Fast
Daily Wash
Delicate/Silk
Hand Wash
Bedding
Spin
Speed up
Energy Ca pacity Spe ed
Express 15 min
Baby Care
Sport
Jeans
Mix
4
1
2
5 6 7
3

GB
3-Control panel
9
3.5 Function buttons
The function buttons (Fig. 3-6) enables additional op-
tions in the selected programme before programme
starts. The related indicators are displayed.
By switching off the appliance or setting a new pro-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights
or -in case of only one option- the LED switches off .
3.5.1-Function button „Temp.“
Press this button (Fig. 3-7) to change the washing
temperature of the programme. If no value is illumi-
nated the water will not heated.
In conjunction with the “Steam” button, the child lock
function can be switch on/off (see CHILD LOCK).
3.5.2-Function button “Speed”
Press this button (Fig. 3-8) to change or deselect the
spin of the programme. If no value is illuminated the
laundry will not spun.
Note: Factory settings
To get best results in each programme Haier has well defi ned specifi c default settings.
If there is no special requirement default settings are recommended.
3.4 Detergent drawer
Open the drawer, three compartments can be
seen (Fig. 3-5):
Compartment 1 : Water inlet only, no detergent
Compartment 2 : Detergent for programme
Compartment : Softener, Conditioning agent etc.
The recommendation on the type of detergents is
suitable for the various washing temperatures, please
refer to the manual of detergent.
3-5
3.5.3-Function button “Steam“
Press this button (Fig. 3-9) to activate the steam function.When this function is activated
the default temperature is the maximum temperature of the programme selected.This
function can be activated only with the following programmes: Hygienic, Baby clothes,
Mix, Synthetics, Cotton.When the function is activated the led above the button will light
up. Pushing again this button the function can be deactivated and the led above the
button will turn off .When the function is activated the temperature of the programme
cannot be changed.
3-7 3-8
Speed
Temp.Speed Steam DelayExtra rinse
3.5.1
3.5.2 3.5.3 3.5.4 3.5.5
3-6

3-Control panel
GB
10
3.5.4 Function button“Extra rinse“
Press this button (Fig. 3-10) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin.
By pressing the button several times one to three ad-
ditional cycles can be selected. They appear in the dis-
play with //.
3.5.5 Function “Speed up“
This function saves time and energy. Preferable if laun-
dry is slightly soiled. Press simultaneously button „Ex-
tra rinse.“ and ”Delay” (Fig. 3-11) for about 3 seconds
to activate the “Speed up” function; u is dis-
played. This function is not available in all programmes
(see PROGRAMMES).
If “Temp.” button is pushed the “Steam” function will
be deactivated.You can activate “Steam” function only
before to start any programme. You cannot activate
“Steam” function while the appliance is already ex-
ecuting a programme.
3.7 „Start/Pause“ button
Press this button (Fig. 3-13) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking.
3.6 “Delay” button
Press this button (Fig. 3-12) to start the programme
with a delay. End time delay could be increased in steps
of 30 minutes from 0,5-24h. For example display off
: means end of programme cycle will be in 6 hours
and 30 minutes. Press “Start/Pause” button to activate
the time delay. It is not applicable to programme SPIN.
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3.8 Child lock
Press button „Temp.“ and ”Steam” (Fig. 3-14) for 3
seconds simultaneously to block all panel elements
against activation. For unlocking please press again
the two buttons.
The display shows (Fig. 3-15) if a button will be
pressed, when the child lock is activated. The change
is not running.
3-15
Extra rinse
3-10
Delay
3-12
Start/Pause
3-13
DelayExtra rinse
Speed up
3-11
3-14
Temp.Speed Steam
Steam
3-9

GB
4-Programmes
11
1) Relating to dry laundry.
2) Choose 90 °C wash temperature only for special hygienic requirements. *: water will not heated (no
value is iluminated).
3) Reduce detergent amount because programme duration is short.
Max. load
1)
Temperature Preset
spin speed
in rpm
Function
in kg in °C
Preset
Steam
Extra rinse
Speed up
Programme HW80
selectable
range 2 1 Fibre type
Cotton 8.0 * to 90 40 •º/Cotton 1400 • • •
Synthetic 8.0 * to 60 40 •º/Synthetic or
mixed fabric 1000 • • •
Mix 8.0 * to 60 30 •º/
Lightly soiled mixed-
laundry of cotton
and synthetic 1000 • • •
Baby Care 4.0 * to 90 40 •º/Cotton/Synthetics 1000 • • •
Hygienic 4.0 * to 90 90 •º/Cotton 1000 • • •
Sport 4.0 * to 40 20 •º/Sports wear 800 • • /
Jeans 8.0 * to 60 30 •º/Jeans 1000 • • •
Cotton 8.0 * to 90 2) 30 •º/Cotton 1400 • • •
Fast 3) 4.0 * to 40 40 •º/
Lightly soiled laun-
dry made of cotton
or synthetic
1000 /•/
Express
15 min 3) 2.0 * to 40 * •º/Cotton / Synthetic 1000 /•/
Daily Wash 4.0 * to 60 30 •º/Cotton fabrics 1000 • • •
Wool 2.0 *to 40 2) * •º/
Machine-washable
fabric made of wool
or with wool content 800 /•/
Delicate/
Silk 2.0 *to 30 30 •º/Delicate laundry
and Silk 800 /•/
Hand Wash 2.0 * to 30 30 •º/
Laundry marked
with symbol for
handwash 400 /•/
Bedding 5.0 * to 60 40 •/ / Cleaning of the
drum with special
detergent 1000 / / /
Spin 8.0 / / / / / All fabrics 1000 / / /
2)
Detergent compartment for:
1Water inlet only, no deter-
gent
2Detergent
tener or care product Sof
•
Yes, º
Optional, No /
+

5-Consumption
GB
12
Programme
Temper-
ature
in °C
Max. load
in kg
HW80
Energy
in kWh
HW80
Water
in L
HW80
Washing time
in h:min
HW80
Spin
drying
perfor-
mance
in %
Cotton *
40°C 4.0 0.46 34 4:31 44
60°C 4.0 0,56 34 4:34 45
°C 8.0 0,54 47 4:34 44
The indicated consumption values may accordingly diff er to local conditions.
* Standard programme for the Energy Labelling according to 2010/30 EU:
Cotton 60°C / 40°C with max. spin speed setting .
The standard 60°C and 40°C cotton programmes are suitable to clean normally soiled
cotton laundry. They are the most effi cient programmes in terms of combined energy and
water consumption for cotton laundry. Used water temperature may diff er from declared
cycle temperature.
Note: Auto Weight
The appliance is equipped with a loading recognition. At low loading, energy, water and
washing time will be reduced automatically in some programmes.
+
+

GB
6-Daily use
13
6.3 Preparing laundry
▶Sort out clothes according to fabric (cotton, syn-
thetics, wool or silk) and to how dirty they are (Fig.
6-3). Pay attention to the care labelling of wash-
ing labels.
▶Separate white clothes from coloured ones.
Wash coloured textiles fi rst by hand to check if
they fade or run.
▶Empty pockets (keys, coins, etc.) and remove
harder decorative objects (e.g. brooches).
▶Garments without hems, delicates and fi nely wo-
ven textile such as fi ne curtains are to be put into
a wash bag to care for this delicate laundry (hand
or dry cleaning would be better).
▶Close zippers, velco fastener and hooks, make
sure the buttons are sewn on tightly.
▶Place sensitive items like laundry without fi rm
hem, delicate underwear (Dessous) and small
items such as socks, belts, bras, etc. in a wash
bag.
▶Unfold large pieces of fabric such as bed sheets,
bedspreads etc.
▶Turn jeans and printed, decorated or color-inten-
sive textiles inside out; possibly wash separately.
6-3
6.1 Power supply
Connect the washing machine to a power supply
(220V to 240V~/50Hz; Fig. 6-1). Please refer also to
section INSTALLATION.
6.2 Water connection
▶Before connecting check the cleanliness and clar-
ity of the water inlet.
▶Tun on the tap (Fig.6-2).
Note: Tightness
Before use check for leakage in the joints between the tap and the inlet hose by turning
on the tap.
CAUTION!
Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and
damage of clothes and appliance.
6-1 6-2

6-Daily use
GB
14
Care chart
Washing
Washable up to 95°C
normal process
Washable up to 60°C
normal process
Washable up to 60°C
mild process
Washable up to 40°C
normal process
Washable up to 40°C
mild process
Washable up to 40°C
very mild process
Washable up to 30°C
normal process
Washable up to 30°C
mild process
Washable up to 30°C
very mild process
Wash by hand
max. 40°C
Do not wash
Bleaching
Any bleaching allowed Only oxygen/
non -chlorine
Do not bleach
Drying
Tumble drying possible
normal temperature
Tumble drying possible
lower temperature
Do not tumble dryr
Line drying Flat drying
Ironing
Iron at a maximum
temperature
up to 200 °C
Iron at a medial tem-
perature
up to 150°C
Iron at a low temper-
ature up to 110 °C;
without steam (steam
ironing may cause irre-
versible damage)
Do not iron
Professional Textile Care
Dry cleaning in tetra-
chloroethene
Dry cleaning in hy-
drocarbons
Do not dry clean
Professional wet clean Do not professional
wet clean
6.4 Loading the appliance
▶Put in the laundry piece by piece
▶Don‘t overload. Note the diff erent maximum load according to programmes! Rule of
thumb for maximum load: Keep six inches between load and drum top.
▶Close the door carefully. Make sure that no pieces of laundry are pinched.

GB
6-Daily use
15
6.5 Selecting detergent
▶Washing effi ciency and performance is determined by used detergent quality.
▶Use only machine wash approved detergent.
▶If needed use specifi c detergents, e.g. for synthetic and woolen fabric.
▶Mind always detergent manufacturer recommendations.
▶Do not use dry cleaning agents such as trichloroethylene and similar products.
Choose the best detergent
Programme
Kind of detergent
Universal Colour Delicate Special Softener
Cotton L/P L/P - - o
Synthetic L/P L/P L - o
Mix L/P L/P - - o
Wool - - - L o
Bedding L/P L/P - - o
Sport - - - L o
Jeans L/P L/P L - o
Hygienic L/P L/P L - o
Fast L L - - o
Express 15 min L L - - o
Daily Wash L/P L/P L - o
Baby Care L/P L/P - - o
Delicate/Silk - - L - o
Handwash - - - L o
Spin L/P - - L -
L = gel-/liquid detergent P = powder detergent O = optional _ = no
If using liquid detergent, it is not recommended to activate the time delay.
We recomment by using:
▶Laundry powder: 20°C to 90°C* (best use:: 40-60°C)
▶Color detergent: 20°C to 60°C (best use: 30-60°C)
▶Wool/delicate detergent: 20°C to 30°C (= best use:)
* Choose 90 °C wash temperature only for special hygienic requirements.
+

6-Daily use
GB
16
6.7 Switch on the appliance
Press the „on/off “- button to switch on the appliance
(Fig. 6-5). The LED of the „Start/Pause“ button is
fl ashing.
6.6 Adding detergent
1. Slide out the detergent drawer.
2. Put the required chemicals into corresponding
compartments (Fig. 6-4)
3. Push back the drawer gently.
Note:
▶Remove detergent residues before next wash cycle from the detergent drawer.
▶Do not overuse detergent or softener.
▶Please follow the instruction on the detergent package.
▶Always fi ll the detergent just before the beginning of the wash cycle.
▶Concentrated liquid detergent should be diluted before adding into compartment 2.
▶The best use of liquid detergent is by using a dosing ball, which is given with the laun-
dry into the washing machine.
▶Do not use liquid detergent if „end time delay“ is selected.
▶Carefully choose the programme settings according to the care symbols on all laun-
dry labels and according to the programme table.
6.8 Select a programme
To get the best washing results, select a programme
which fi ts the degree of soiling and sort of laundry
type.
Turn the programme knob (Fig. 6-6) to select the
right programme. Related programme LED lights up
and the default settings are displayed.
6.9 Add individual selections
Select required options and settings refer to (Fig. 6-7);
CONTROL PANEL.
Temp.Speed Steam DelayExtra rinse
6-7
6-4
Note: Odour removal
Before fi rst use we recommended to run programme SELF CLEAN with no load and
small amount of detergent in washing agent compartment (2) or special machine
cleaner to remove possibly corruptive residues.
6-66-5

GB
6-Daily use
17
1. At programme cycle end is displayed.
2. The appliance switches off automatically.
3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
4. Turn off the water supply.
5. Unplug the power cord.
6. Open the door to prevent formation of moisture and odours. Let it open while not used.
6.13 Activate or deactivate the buzzer
The acoustic signal can be deselected if necessary:
1. Switch on the appliance.
2. Select the SPIN programme.
3. Press the “Delay “button and “Extra rinse” button at the same time for about 3 sec-
onds. “ ” will be displayed and the buzzer will be deactivated.
For activating the buzzer press these two buttons at the same time again. “ ” will
be displayed.
To interrupt a running programme press gently “Start/Pause“. The LED above the button
is fl ashing. Press it again to resume operation.
To cancel a running programme and all its individual settings
1. Press “Start/Pause” button to interrupt the running programme.
2. Press „On/Off “ button for about 2 seconds to switch the appliance off .
3. Select ‘’no Speed’’ and run programme SPIN(all lights are on) to drain the water.
4. Shut down and start up, then select a new programme and start it.
Note: Door lock
▶For safety reasons the door is locked partially during the washing cycle. It is only pos-
sible to open the door at the end of the programme or after the programme was can-
celled correctly (see description above).
▶In case of high water level, high water temperature and during spinning it is not pos-
sible to open the door; is displayed
Note: Standby mode / energy-saving mode
The switched on appliance will go into standby-mode if it will not be activated within 2
minutes before starting the program or at the end of program. The display switsches
off . This saves energy. To interrupt the standby mode push “Start/Pause“ button.
6.10 Start wash programme
Press “Start/Pause“ button (Fig. 6-8) to start. The
LED of the „Start/Pause“ button stops fl ashing and
lights up continuously
Appliance operates according to present settings.
Changes are only possible by cancelling the programme.
6.11 Interrupt - cancel wash programme
Start/Pause
6-8
6.12 After washing

7-Eco-friendly washing
GB
18
Environmentally responsible use
▶To achieve best use of energy, water, detergent and time you should use the recom-
mended maximum load size.
▶Do not overload (hand width clearance above laundry).
▶For slightly soiled laundry select the Quick Wash programme.
▶Apply exact dosages of each washing agent.
▶Choose the lowest adequate washing temperature - modern detergents are ef-
ciently cleaning below 60°C.
▶Raise default settings only due to heavy staining.
▶Select max. spinning speed if a domestic dryer is used.

GB
8-Care and cleaning
19
8.1 Cleaning the detergent drawer
Take always care there are no detergent residues.
Clean the drawer regularly (Fig. 8-1):
1. Pull out the drawer until it stops.
2. Press the release button and remove the drawer.
3. Flush the drawer with water until it is clean and
insert the drawer back in the appliance.
8.2 Cleaning the machine
▶Unplug the machine during cleaning and mainte-
nance.
▶Use a soft cloth with soap liquid to clean the ma-
chine case (Fig. 8-2) and rubber components.
▶Do not use organic chemicals or corrosive sol-
vents.
Note: Hygiene
For regular maintenance we recommend to run programme SELF CLEAN with no load
in order to remove possible corruptive residues quarterly. Add a small amount of deter-
gent in washing agent compartment (2) - or use a special machine cleaner.
8.3 Water inlet valve and inlet valve lter
To prevent blockage of water supply by solid substanc-
es like lime clean regularly the inlet valve lter.
▶Unplug the power cord and turn off the water
supply.
▶Unscrew the water inlet hose at the back (Fig.
8-3) of the appliance as well as on the tap.
▶Flush the lters with water and a brush (Fig. 8-4).
▶Insert the lter and install the inlet hose.
8.4 Cleaning the drum
▶Remove accidentally washed metal parts such as
pins, coins, etc. from the drum (Fig. 8-5) because
they cause rust stains and damage.
▶Use a non-chloride cleaner for removing rust
stains. Observe the warning hints of the cleaning
agent manufacturer.
▶Do not use any hard objects or steel wool for
cleaning.
8-3 8-4
8-5
8-1
1
2
8-2
Temp.Speed Steam Delay Start/PauseExtra rinse
+++
A
Energy Capacity
9kg
rpm
1400
HW90-BP14636
Bedding
Cotton +
Baby clothes
Hygienic
Sportwear

8-Care and cleaning
GB
20
1. Turn off and unplug the machine (Fig. 8-8).
2. Open service ap. You can either use a coin or a
screwdriver (Fig. 8-9).
3. Provide a at container to catch leach water
(Fig. 8-10). There could be bigger amounts!
4. Pull the drainhose out and hold its end above the
container (Fig. 8-10).
5. Take the sealing plug out of the drainhose (Fig.
8-10).
6. After complete drainage close drainhose (Fig.
8-11). and push it back into the machine.
7. Unscrew and remove counter clockwise the
pump lter (Fig. 8-12).
8. Remove contaminants and dirt (Fig. 8-13).
8.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 8-6).
2. Turn off water supply (Fig. 8-7).
3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leackage.
WARNING!
Scalding Risk! Water in the pump lter can be very
hot! Before any action please ensure water has
cooled down.
Note: Hygiene
After long periods of disuse we recommended to run programme SELF CLEAN with
noload and small amount of detergent in washing agent compartment (2) or special
machine cleaner to remove possibly corruptive residues..
8.6 Pump lter
Clean the lter once a month and check the pump lter
for instance if the appliance:
▶doesn´t drain the water.
▶doesn´t spin.
▶cause unusual noise while running.
8-8 8-9
8-6 8-7
8-10 8-11
8-12 8-13

GB
8-Care and cleaning
21
CAUTION!
▶Pump lter sealing has to be clean and unhurt. If the lid is not full tightened,
water can escape.
▶The lter must be in place, or it may lead to leakage.
9. Clean carefully pump lter, e.g. using running water
(Fig. 8-14).
10. Re x it thoroughly (Fig. 8-15).
11. Close service ap.
8-14 8-15

9-Troubleshooting
GB
22
9.2 Troubleshooting with display code
Problem SolutionCause
• Drainage error, water is not fully drained
within 6 minutes
• Clean pump lter.
• Check drain hose installation.
• Lock - error. Shut the door properly.•
• Water level not reached after 8 minutes.
• Drain hose is self-syphoning..
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
• Water protective level - error.. Contact the After sales service.•
Many occuring problems could be solved by yourself without speci c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶Electrical equipment should be serviced only by quali ed electrical experts, because
improper repairs can cause considerable consequential damages..
▶A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly quali ed persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
:
The remaining wash cycle time will be 1 hour and 25 minutes
:
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes
/ / 1/2/3 additional rinses are choosen (see FUNCTION BUTTONS „Extra rinse“).
The washing cycle is nished. The appliance shuts off automatically.
Function child lock is activated
Door is closed because of high water level, high water temperature or spinning cy-
cle.
The buzzer is deactivated
The buzzer is activated
u Function “Sped up” is activated

GB
9-Troubleshooting
23
Problem SolutionCause
• Temperature sensor - error.. Contact the After sales service..•
• Heating error
• Contact the After sales service..
• Motor - error.. Contact the After sales service..•
or
or
• Abnormal communication error
• Contact the After sales service.
Check and balance laundry load in the drum..
• Unbalanced load - error. • Reduce the load
• Water level sensor - error.
• Contact the After sales service..
• Machine leakage . • Open drain pump to drain,Shut down the machine.
Contact the after sales service.
Problem SolutionCause
Washing machine fails
to operate.
• Programme is not yet started. • Check programme and start it.
• Door is not properly closed. Close the door properly.•
• Machine has not been switched on. • Switch the machine on.
• Power failure. Check power supply.•
• • Child lock is activated. Deactivate child lock.
Washing machine
will not be lled with
water.
• No water. Check water tap. •
• • Inlet hose is kinked. Check inlet hose.
• Inlet hose lter is blocked. • Unblock inlet hose lter.
• Water pressure is less than 0.03 MPa.
• Check water pressure.
• Door is not properly closed. Close the door properly.•
• Water supply failure. Ensure the water supply.•
Machine is draining
while being lled.
• Height of drain hose is below 80 cm.
• Make sure that drain hose is
properly installed.
• Drain hose end could reach into
water. • Make sure the drain hose is not
in water.
Drainage failure. Drain hose is blocked.• • Unblock drain hose.
• Pump lter is blocked. • Clean pump lter.
• Drain hose end is higher than 100 cm
above oor level.
• Make sure that drain hose is
properly installed.
Strong vibration while
spinning.
• Not all transportation bolts have
been removed.
• Remove all transportation bolts
.
• Appliance has no solid position.
• Ensure solid ground and a levelled
position.
• Machine load is not correct. Check load weight and balance.•
Operation stops
before completing
wash cycle.
• Water or electric failure. Check power and water supply.•
Operation stops for
a period of time. • Appliance displays error code. Consider display codes.•
• Problem due to load pattern. Reduce or adjust load.•
• Programme performs soaking cycle.
• Cancel programme and restart.
9.3 Troubleshooting without display code

9-Troubleshooting
GB
24
Should the error messages reappear even after the taken measures, switch off the appli-
ance, disconnect the power supply and contact the customer service.
9.4 In case of power failure
The current programme and its setting will be saved.
When power supply is restored operation will be re-
sumed.
If a power failure cuts an operating wash programme
door opening is mechanically blocked. To get out any
laundry water level should not be seen in the glassy
porthole of the door - Danger of burns! Water level
has to be lowered as described in “Pump lter”. Not
til then pull lever (A) beneath service ap (Fig. 9-1) until
door is unlocked by a gentle click. Afterwards re x all
parts.
A
9-1
Note: Foam formation
If too much foam is inspected during spin cycle, motor stops and drain pump will be ac-
tivated for 90 seconds. If that elimination of foam fails up to 3 times, programme ends
without spinning.
Problem SolutionCause
Excessive foam oats
drum and/or deter-
gent drawer.
• Detergent is not a appropriate. Check detergent recommen-• dations.
• Excessive use of detergent. • Reduce amount of detergent.
Automatic adjust-
ment of washing
time.
• Washing programme duration will
be adjusted. • This is normal and doesn‘t af-
fect functionality.
Spinning fails. • Unbalance of laundry. • Check machine load and laun-
dry and run a spinning pro-
gramme again.
Unsatisfactory wash-
ing result.
• Degree of pollution does not agree
with selected programme. • Select an other programme.
• Detergent quantitiy was not suf-
cient. • Choose the detergent acc. to
the degree of pollution and
acc. to manufaturer speci ca-
tions.
• Maximum load has been exceeded. • Reduce loading.
• Laundry was unevenly distributed
in the drum. • Loose the laundry.
Washing powder
residues are on the
laundry.
• Insoluble particles of detergent can
remain as white spots on the laun-
dry.
• Perform extra rinse.
• Try to brush the points from
the dry laundry.
• Choose an other detergent.
Laundry has grey
patches. • Caused by fats such as oils, creams
or ointments. • Pretreat the laundry with a
special cleaner.

GB
10-Installation
25
10.1 Preparation
▶Take the appliance out of the packaging.
▶Remove all packaging material including polystyrene base, keep them out of childrens
reach. While opening the package, water drops may be seen on plastic bag and port-
hole. This normal phenomenon results from water tests in the factory.
10.2 Dismantle the transportation bolts
The transportation bolts are designed for clamping
anti-vibration components inside the appliance during
transportation to prevent inner damage.
1. Remove the back cover (Fig. 10-1).
2. Remove all 4 bolts on the rear side and take out
plastic spacers (A) from inner side of the machine
(Fig. 10-2).
3. Replace back cover by inserting it in the two gaps
its convexity is facing out (Fig. 10-3).
4. Fill left holes with blanking plugs (Fig. 10-4).
10-1
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environ-
mentally friendly manner.
10-3 10-4
Note: Keep in safe place
Keep the transportation bolts in a safe place for later use. Whenever the appliance is to
be moved at rst reinstall the bolts.
10.3 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage:
1. Remove the blanking plugs.
2. Remove the back cover
3. Insert the plastic spacers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.

10-Installation
GB
26
10.5 Aligning the appliance
Adjust all feet (Fig. 10-7) to achieve a complete
level position. This will minimize vibrations and thus
noise during use. It will also reduce wear and tear. We
recommend to use a spirit level for adjustment. Floor
should be as stable and at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.
10-7
Following connections are possible:
10.5.1 Drain hose to sink
▶Hang the drain hose with the U-support over the
edge of a sink with adequate size (Fig. 10-6).
▶Protect the U-support suffi ciently against slip-
ping.
10.5.2 Drain hose to waste water connection
▶The internal diameter of the stand pipe with
vent-hole must be minimum 40 mm.
▶Put the drain hose for approx. 80 mm in the
wastewater pipe.
▶Attach the U-support and secure it suffi ciently
(Fig. 10-7).
10.5 Drain Water Connection
Fix the water drain hose properly to the piping. The hose has to reach at one point a
height between 80 and 100 cm above the appliance bottom line! If possible keep always
drain hose xed to the clip at the appliance back.
WARNING!
▶Use only the supplied hose set for the connection.
▶Never reuse old hose sets!
▶Only connect to cold water supply.
▶Before connection, check whether the water is clean and clear.
10-7
10-6

GB
10-Installation
27
CAUTION!
▶The drain hose should not be submerged in water and should be securely xed and
leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less
than 80 cm, the washing machine will continuously drain while being lled (self-si-
phoning).
▶Drain hose is not to be extended. If necessary contact after sales service.
10.5.3 Drain hose to sink connection
▶The junction must lie above the siphon
▶A spigot connection is usually closed by a pad (A).
That must be removed to prevent any disfunc-
tion (Fig. 10-8).
▶Secure the drain hose with a clamp.
10-8
10.6 Fresh Water Connection
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled
end to the appliance (Fig. 10-9. Tighten the
screw joint by hand.
2. The other end connect to a water tap with a
3/4“ thread (Fig. 10-10).
10-1010-9
Note: Aqua-stop-system:
The aqua-stop system protects against water damage by automatically cutting the
fresh water supply in case of a leaking hose. This is indicated by a red marker (A). The
hose must be replaced.

10-Installation
GB
28
10.7 Electrical Connection
Before each connection check if:
▶power supply, socket and fusing are appropriate to
the rating plate.
▶the power socket is earthed and no multi-plug or
extension are used.
▶the power plug and socket are strictly according.
▶Only UK: The UK plug meets BS1363A standard.
Put the plug into the socket (Fig. 10-11).
WARNING!
▶Ensure always that all connections (power supply, drain and fresh water hose) are rm,
dry and leack free!
▶Take care these parts are never to be crushed, kinked, or twisted
▶If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard. .
Note: Hygiene
After each installation or long periods of disuse, before rst use and for regular mainte-
tenance run programme SELF CLEAN with no load and small amount of detergent in
washing agent compartment (2) or with special machine cleaner to remove possibly
corruptive residues.
10-11

GB
11-Technical data
29
1) Based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and
partial load, and the consumption of the low-power modes. Actual energy consumption will
depend on how the appliance is used.
2) Based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and
partial load. Actual water consumption will depend on how the appliance is used .
3) Class G is the least effi ciency and Class A is the most effi cient.
4) Based on the standard 60 °C cotton programme at full load and the standard 40 °C cotton
programme at partial load .
5) “Standard 60 °C cotton programme“ and “standard 40 °C cotton programme“ are standard
washing programmes to which the information in the label and che relates. These pro-
grammes are suitable to clean normally soiled cotton laundry and they are the most effi cient
programmes in terms of combined energy and water consumption .
6) In case there is a power management system.
7) Based on the standard 60°C cotton programme at full load.
11.1 Product che according to regulation EU No. 1061/2010
Suppliers name or trade mark Haier
Supplier´s model identi er HW80-BP16636
Rated capacity (kg) 8
Energy effi ciency class A+++
Energy consumption per year (AE C in kWh/year)
1) 118
Energy consumption of standard cotton programme 60°C, full load
(kWh/cycle) 0.54
Energy consumption of standard cotton programme 60°C, partial
load (kWh/cycle) 0.56
Energy consumption of standard cotton programme 40°C, partial
load (kWh/cycle) 0.46
Weighted power consumption of the off mode (W) 0.42
Weighted power consumption of the left-on mode (W) 0.48
Water consumption per year (AW C in L/year)
2) 9900
Spin-drying effi ciency class 3) A
Max. spin speed (rpm) 4) 1540
Remaining moisture content (%) 4) 45
Standard 60°C cotton programme 5) Cotton + 60°C +”intense” + max. spin
Standard 40°C cotton programme 5) Cotton + 40°C +”intense” + max. spin
Programme time of cotton 60°C full load (min) 280
Programme time of cotton 60°C partial load (min) 280
Programme time of cotton 40°C partial load (min) 277
Duration of the left-on mode (T I in min)
6) 3
Airborne accustical noise (washing/spinning)
in dB(A) re 1pW
7) 52/78
Type freestanding
+
+

11-Technical data
GB
30
11.2 Additional technical data
Dimension (HxWxD in mm) 850x595x600
Voltage in V 220-240 V~/50Hz
Current in A 10
Max power in W 1950
Water pressure in MPa 0.03≤P ≤1
Netto weight in kg 72
HW80-BP16636
11.3 Standards and Directives
This product meets the requirements of all applicable EC directives with the correspon-
ding harmonised standards, which provide for CE marking.

GB
12-Customer service
We recommend our Haier Customer Service and the use of original spare parts.
If you have a problem with your appliance, please fi rst check section TROUBLESHOOTING.
If you cannot fi nd a solution there, please contact
▶your local dealer or
▶the Service & Support area at www.haier.com where you can fi nd telephone numbers
and FAQs and where you can activate the service claim.
To contact our Service, ensure that you have the following data available.
The information can be found on the rating plate.
Model ____________________ Serial No. _____________________
Also check the Warranty Card supplied with the product in case of warranty.
For general business enquiries please fi nd below our addresses in Europe:
European Haier addresses
Country* Postal address Country* Postal address
Italy
Haier Europe Trading SRL
Via De Cristoforis, 12
21100 Verese
ITALY
France
Haier France SAS
3-5 rue des Graviers
92200 Neuilly sur Seine
FRANCE
Spain
Portugal
Haier Iberia SL
Pg. Garcia Faria, 49-51
08019 Barcelona
SPAIN
Belgium-FR
Belgium-NL
Netherlands
Luxembourg
Haier Benelux SA
Anderlecht
Route de Lennik 451
BELGIUM
Germany
Austria
Haier Deutschland GmbH
Hewlett-Packard-Str. 4
D-61352 Bad Homburg
GERMANY
Poland
Czechia
Hungary
Greece
Romania
Russia
Haier Poland Sp. zo.o.
Al. Jerozolimskie 181B
02-222 Warszawa
POLAND
United
Kingdom
Haier Appliances UK Co.Ltd.
One Crown Square
Church Street East
Woking, Surrey, GU21 6HR
UK
*For more information please refer to www.haier.com
31

HW80-BP16636

FR
HW80-BP16636
Manuel d’utilisation
Lave-linge

FR
2
Légende
Attention - Règles importantes de sécurité
Généralités et conseils
Informations sur l'environnement
Mise au rebut
Contribuer à la protection de l'environnement et de
la santé humaine. Veuillez mettre les emballages au
rebut dans les contenants prévus pour leur recyclage.
Contribuez à recycler les déchets d’appareils élec-
triques et électroniques. Veuillez à ne pas mettre au
rebut les appareils ayant ce symbole avec les déchets
ménagers. Veuillez déposer l’appareil à votre usine de
recyclage locale, ou prendre contact avec votre bureau
municipal.
Nous vous remercions d'avoir acheté un produit Haier.
Veuillez lire attentivement ces instructions avant d'utiliser l'appareil. Ces instructions sont
des informations utiles vous permettant de mieux exploiter cet appareil, et vous assurer
une installation, une utilisation et un entretien sécurisés et adéquats.
Veuillez conserver ce manuel dans un endroit approprié an de toujours vous y référer
pour une utilisation sécurisée et adéquate de l’appareil.
Si vous devez vendre, donner ou abandonner l'appareil pour cause de déménagement,
assurez-vous également de laisser ce manuel an que le prochain utilisateur puisse maî-
triser l'appareil, notamment les règles de sécurité.
AVERTISSEMENT!
Risque de blessure ou d'asphyxie!
Débranchez l'appareil de toute alimentation principale. Coupez les câbles primaires et
mettez-les au rebut. Enlevez le verrou de la porte pour éviter qu'un enfant ou un animal
domestique ne soit coincé dans l'appareil.

FR
1-Consignes de sécurité 4 ...........................................................................................................
2-Description du produit 7 ..........................................................................................................
3-Panneau de commande 8 ........................................................................................................
4-Programmes 11 ............................................................................................................................
5-Consommation 12 .......................................................................................................................
6-Utilisation quotidienne 13 ..........................................................................................................
7-Lavage écologique 18 .................................................................................................................
8-Entretien et nettoyage 19 ..........................................................................................................
9-Dépannage 22 ...............................................................................................................................
10-Installation 25 ..............................................................................................................................
11-Informations techniques 29 ....................................................................................................
12-Service clientèle 31 ....................................................................................................................
3

1-Consignes de sécurité
FR
4
Avant de mettre l'appareil en marche pour la première fois, veuillez
lire les consignes de sécurité ci-après!
Avertissement!
Avant la première utilisation
▶Vériez qu'il n'existe aucun dommage lié au transport.
▶Retirez tous les boulons de transport.
▶Retirez tous les emballages et tenez-les hors de portée des
enfants.
▶Il faut toujours au moins deux personnes pour la manipulation de
l’appareil car il est lourd.
Utilisation quotidienne
▶Cet appareil peut être utilisé par des enfants âgés d'au moins
8ans, ainsi que par des personnes ayant des capacités phy-
siques, sensorielles ou mentales réduites ou sans expérience et
connaissances, si elles sont encadrées ou formées à l'utilisation
sécurisée de l'appareil et comprennent les risques y relatifs.
▶Tenez les enfants de moins de 3ans hors de portée de l'appareil,
sauf s'ils sont en permanence surveillés.
▶Les enfants ne doivent pas jouer avec l'appareil.
▶Ne laissez pas un enfant ou un animal domestique s'approcher
de l'appareil lorsque la porte est ouverte.
▶Tenez les produits de lavage hors de la portée des enfants.
▶Remontez les fermetures éclair, recousez les éléments mal xés
et faites attention aux petits articles pour éviter que le linge ne
s'emmêle. Si nécessaire, utilisez un sac ou un let approprié.
▶Évitez de toucher ou d'utiliser l'appareil pieds nus ou lorsque vos
mains ou vos pieds sont mouillés ou humides.
▶Évitez de couvrir l'appareil pendant qu'il fonctionne ou après
utilisation, pour laisser l'humidité s'évaporer.
▶Évitez de déposer des objets lourds ou des sources de chaleur
ou d'humidité sur l'appareil.
▶Évitez d'utiliser ou de conserver du détergent inammable ou
des agents de nettoyage à sec à proximité de l'appareil.
▶Évitez d'utiliser un pulvérisateur inammable à proximité de
l'appareil.
▶Évitez de laver des vêtements traités avec des solvants dans
l'appareil sans les avoir préalablement séchés à l'air.

1-Consignes de sécurité
5
Avertissement!
Utilisation quotidienne
▶Évitez de retirer ou d'insérer la che en présence de gaz inam-
mables
▶Évitez de laver des matériaux en caoutchouc ou en éponge à
des températures élevées.
▶Évitez de laver tout linge sali par la farine.
▶Évitez d’ouvrir le tiroir à lessive pendant le cycle de lavage.
▶Évitez de toucher la porte pendant le lavage, car elle est chaude.
▶Évitez d'ouvrir la porte si l'eau est visible à travers le hublot.
▶Évitez d’ouvrir la porte en la forçant. Elle est équipée d'un sys-
tème de verrouillage et s'ouvre quelques instants après la n du
cycle de lavage.
▶Arrêtez l'appareil après chaque programme de lavage et avant
d'entreprendre tout entretien, et débranchez l'appareil de l'ali-
mentation électrique pour économiser l'énergie et pour des ns
de sécurité.
▶Tenez la che et non le cordon pour débrancher l'appareil.
Entretien et nettoyage
▶Assurez-vous que les enfants sont surveillés lors du nettoyage
et l'entretien.
▶Débranchez l'appareil de l'alimentation électrique avant d'entre-
prendre tout entretien.
▶Gardez la partie inférieure du hublot propre et ouvrez la porte et
le tiroir à lessive lorsque l'appareil est en marche.
▶N'utilisez pas un pulvérisateur d'eau ou nettoyant à vapeur pour
nettoyer l'appareil.
▶Faites remplacer le cordon d'alimentation endommagé par le
fabricant, son représentant ou par des personnes qualiées
uniquement an d'éviter tout risque.
▶N'essayez pas de réparer vous-même l'appareil. En cas de répa-
ration, veuillez contacter notre service clientèle.
Installation
▶Placez l'appareil dans un endroit bien ventilé. Choisissez un em-
placement qui permet d'ouvrir complètement la porte.
▶N'installez jamais l'appareil à l'extérieur dans un endroit humide,
ou dans un lieu qui serait sujet à des fuites d'eau, comme en
dessous ou à proximité d'un bloc-évier. En cas de fuite d'eau,
coupez l'alimentation électrique et laissez le lave-linge sécher
naturellement.

FR
2-Description du produit
7
2.1 Description de l’appareil
Partie avant (Fig.2-1): Côté arrière (Fig.2-2):
6
7
5
8
1 3 42
2.2 Accessoires
Vériez les accessoires et la documentation suivant cette liste (Fig.2-3):
Tuyau d’arrivée
assemblé1)
5 Bouchons
obturateurs
Support de
tuyau de
vidange
Manuel
d’utilisation
Carte de garantie
Remarque:
En raison des modications techniques et des divers modèles, les illustrations des cha-
pitres suivants peuvent être diérentes de votre modèle.
2-3
T1 T2
T3 S1
S2 S4
S3
T4
S5 S6
1 Tiroir à lessive/
adoucissant
2 Plan de travail
3 Sélecteur de pro-
gramme
4 Panneau
5 Plaque signalé-
tique
6 Volet d’entretien
7 Pieds ajustables
8 Poignées de la
porte
1 Boulons de transport (T1-T4)
2 Vis du couvercle arrière
3 Vis du couvercle arrière (S1-S6)
Panneau
4 Cordon d'alimentation
5 Vanne d'arrivée d'eau
6 Tuyau de vidange

3-Panneau de commande
FR
8
1 Bouton "Marche / Arrêt"
2 Sélecteur de programme
3 Écran
4 Tiroir à lessive/adoucissant
5 Boutons de fonction
3.1 “Bouton On/O"(Marche/Arrêt)
Appuyez légèrement sur ce bouton (Fig. 3-2) pour
mettre l’appareil en marche. L’écran s'allume et le
voyant du bouton “Start/Pause” (Départ/Pause) cli-
gnote. Appuyez-le à nouveau pendant environ 2 se-
condes pour éteindre l'appareil. Si aucun élément du
panneau ou aucun programme n'est activé au bout
d'un moment, l'appareil s'éteint automatiquement.
3.2 Sélecteur de programme
Vous pouvez sélectionner l’un des 16programmes en
tournant le bouton (Fig.3-3). Le LED correspondant
s’allume et les paramètres par défaut s’achent.
3.3 Écran
L’écran (Fig. 3-4) ache les informations suivantes:
▶Durée du lavage
▶Fin diérée
▶Codes d’erreur et informations sur l’entretien
3-4
6 Touche du "retardateur"
7 Bouton «Départ/
Pause»
Remarque: Signal sonore
Le signal sonore retentit dans les cas suivants:
▶lorsque vous appuyez sur un bouton;
▶lorsque vous tournez le sélecteur de programme;
▶à la n d’un programme;
▶en cas de dysfonctionnement.
Vous pouvez désactiver le signal sonore en cas de besoin: voir la section UTILISA-
TION QUOTIDIENNE.
3-2
3-3
4
1
2
5 6 7
3

FR
3-Panneau de commande
9
3.5 Boutons de fonctions
Les boutons de fonction (Fig.3-6) activent des options
supplémentaires du programme sélectionné avant
son démarrage. Les indicateurs correspondants s’af-
chent à l'écran.
Toutes les fonctions se désactivent lorsque vous ét-
eignez l'appareil ou lorsque vous congurez un nou-
veau programme.
Si un bouton dispose de plusieurs options, vous pou-
vez sélectionner l’option souhaitée en appuyant de
manière séquentielle sur le bouton.
Pour supprimer le paramètre ou annuler le processus
de paramétrage, appuyez sur le bouton de fonction
jusqu’à ce que les voyants LED s’allument ou, dans le
cas d’une seule option, les voyants LED s’éteignent.
3.5.1- Bouton de fonction «Temp.»
Appuyez sur ce bouton (Fig.3.-7) pour changer la tem-
pérature de lavage du programme. Si aucune valeur ne
s’illumine, l’eau ne sera pas chauée.
En combinaison avec le bouton «Steam (Vapeur)», la
fonction de verrouillage enfant peut être activée/dé-
sactivée (voir SÉCURITÉ ENFANTS).
3.5.2- Bouton de fonction «Tr/min»
Appuyez sur ce bouton (Fig. 3.-8) pour changer ou
désélectionner le programme d’essorage. Si aucune
valeur ne s’illumine, le linge ne sera pas essoré.
Remarque: Paramètres d'usine
Pour garantir des résultats optimaux dans chaque programme, Haier a déni avec
précision les paramètres par défaut. En l’absence d’indications particulières, nous vous
recommandons d'utiliser les paramètres par défaut.
3.4 Tiroir à lessive
Ouvrez le tiroir. Il contient trois compartiments
(Fig.3-5):
Compartiment 1 : Arrivée d’eau uniquement,
pas de lessive
Compartiment 2 : Lessive pour programme
Compartiment - : Adoucissant, agent de condition
nement, etc.
Ce type de lessive est adapté pour les diérentes tem-
pératures de lavage. Référez-vous au manuel de les-
sive.
3-5
3.5.3-Bouton de fonction (Vapeur)
Appuyez sur ce bouton (Fig. 3-9) pour activer la fonction «vapeur». Lorsque cette fonc-
tion est activée, la température par défaut est la température maximale du programme
sélectionné. Cette fonction peut uniquement être activé avec les programmes suivants:
Hygiénique, vêtements pour bébé, mixte, synthétique, coton. Lorsque la fonction est
activée, la led au-dessus du bouton s'allume. Si vous appuyez à nouveau ce bouton, la
fonction peut être désactivée et la led au-dessus du bouton s’éteindra. Lorsque cette
fonction est activée, la température du programme ne peut pas être changée.
3-7 3-8
Temp. Tr/min Vapeur Fin diffèrèe
Speed up
Rincage +
3.5.1
3.5.2 3.5.3 3.5.4 3.5.5
3-6
Produktspecifikationer
Varumärke: | Haier |
Kategori: | tvättmaskin |
Modell: | HW80-BP16636 |
Färg på produkten: | Zwart |
Vikt: | 98.5 g |
Bredd: | 79 mm |
Antal lampor: | 1 lampen |
Typ av lampa: | LED |
LED-typ: | CREE XM-L2 U2 |
Batteritid/batteritid: | 680 uur |
Lichtstroom: | 1000 lm |
Färg ljus: | Wit |
Ljusintensitet: | 3400 cd |
Batterityp: | 18650/CR123 |
Ficklampa typ: | Lantaarn aan hoofdband |
Strålavstånd (max): | 117 m |
Blinkande ljuslägen: | SOS mode, Strobe mode |
Justerbart pannband: | Ja |
Huvudets diameter: | 18.5 mm |
Behöver du hjälp?
Om du behöver hjälp med Haier HW80-BP16636 ställ en fråga nedan och andra användare kommer att svara dig
tvättmaskin Haier Manualer
7 April 2025
10 Februari 2025
10 Februari 2025
10 Februari 2025
10 Januari 2025
10 Januari 2025
5 Januari 2025
3 Januari 2025
29 December 2024
29 December 2024
tvättmaskin Manualer
- Zenith
- Etna
- Singer
- Laurus
- Kleenmaid
- Vedette
- Lemair
- BSK
- De Dietrich
- Khind
- Dexter
- Smeg
- Curtiss
- Friac
- Esatto
Nyaste tvättmaskin Manualer
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025