Hammer N4400 Bruksanvisning
Läs gratis den bruksanvisning för Hammer N4400 (44 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 10.5 recensioner. Har du en fråga om Hammer N4400 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/44
Keep this manual handy and in good condition for continual reference!
User Manual
Bandsaw
N4400
Dok.ID: 503-15-4502 • Englisch • 2010-10-01
(Translation)
Bandsaw
N4400
For the safety of all personnel, it is necessary to conscientiously study this manual before assembling and
putting the machine into operation. This manual must be kept in good condition, as it is considered to be a
part of the machine. Furthermore, keep the manual handy in the vicinity of the machine so that it is acces-
sible to personnel when they are using, maintaining or repairing the machine.
Attention: Upon arrival, the machine must be inspected immediately. If the machine was damaged during
transport or if parts are missing, a written record of the problems must be submitted to the forwarding
agent and a damage report must be drawn up. Be sure to also notify your supplier straight away.
© Felder KG
KR-FELDER-STR 1
A-6060 Hall in Tirol
Tel.: +43 (0) 5223 45 0 90
Fax.: +43 (0) 5223 45 0 99
E-Mail: info@hammer.at
Internet: www.hammer.at
HAMMER A product of the FELDER GROUP
2
Bandsaw
N4400
Table of contents
Table of Contents
1 General .......................................................................................................... 5
1.1 Explanations of the symbols .............................................................................................5
1.2 Information regarding the manual ....................................................................................5
1.3 Liability and warranty .....................................................................................................6
1.4 Copyright ......................................................................................................................6
1.6 Spare parts ...................................................................................................................6
1.7 Disposal ........................................................................................................................7
2 Safety ............................................................................................................ 8
2.1 Intended use ..................................................................................................................8
2.2 Manual contents ............................................................................................................8
2.3 Making changes and modifications to the machine.............................................................8
2.4 Responsibilities of the operator .........................................................................................9
2.5 What is required of the personnel ....................................................................................9
2.6 Work safety ..................................................................................................................9
2.7 Personal safety .............................................................................................................10
2.8 Hazards arising from the machine ..................................................................................10
2.9 Other risks ..................................................................................................................10
3 Declaration of Conformity ............................................................................. 11
4 Technical data .............................................................................................. 12
4.1 Dimensions and weight .................................................................................................12
4.2 Operation and storage conditions ..................................................................................12
4.3 Electrical connection .....................................................................................................12
4.4 Noise emissions ...........................................................................................................13
4.5 Dust extraction .............................................................................................................14
5. Setting up the machine ................................................................................. 15
5.1 Overview ....................................................................................................................15
5.2 Data plate ...................................................................................................................16
6 Setup and installation ................................................................................... 17
6.1 Safety instructions ........................................................................................................17
6.2 Positioning ..................................................................................................................17
6.2.1 Safety instructions ...................................................................................................18
6.2.2 Setting up the work table .........................................................................................18
7 Operation .................................................................................................... 19
7.1 Safety instructions ........................................................................................................19
7.2 Switching on the machine .............................................................................................20
7.3 Authorised work techniques ...........................................................................................20
7.4 Authorised work techniques ...........................................................................................21
7.4.1 Positioning the 90° end stop on the work table ...........................................................21
7.4.2 Parallel cutting fence ................................................................................................21
7.4.3 Saw blade replacement/tension ................................................................................22
7.4.4 Longitudinal cut along the marked line .......................................................................22
7.4.5 Cutting round work-pieces in the transverse direction ...................................................23
7.4.6 Longitudinal cut of narrow or thin work-pieces with the guide fence ...............................23
3
Produktspecifikationer
| Varumärke: | Hammer |
| Kategori: | Sågmaskin |
| Modell: | N4400 |
Behöver du hjälp?
Om du behöver hjälp med Hammer N4400 ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Hammer Manualer
4 Augusti 2024
Sågmaskin Manualer
- Westfalia
- AEG
- Defort
- Luxor
- Extralink
- Toledo
- Huvema
- Qualcast
- Lionelo
- Solo
- Clarke
- Proxxon
- Duro Pro
- Greenworks
- Skil
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025