Hannspree HL195ABB Bruksanvisning

Hannspree Övervaka HL195ABB

Läs gratis den bruksanvisning för Hannspree HL195ABB (23 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Hannspree HL195ABB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/23

HL195

HSG1145

OSD[V4.393]

User’s Manual OSD[4.393]

Before operating the monitor, please read this manual thoroughly. This manual should be retained for

future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment oﬀ and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two

conditions (1) this device may not cause harmful interference and (2) this device must accept any ﹕ ﹔

interference received, including interference that may cause undesired operations.

CANADA

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulation.

This device complies with requirement of EMC directive 2004/108/EC with regard to

Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage directive.

Socket-outlet shall be near the equipment and shall be accessible.

User’s Manual

Congratulations!

This display is designed for both you and the planet!

The display you have just purchased carries the TCO

Certiﬁed label. This ensures that your display is

designed, manufactured and tested according to some of

the strictest quality and environmental requirements in

the world. This makes for a high performance product,

designed with the user in focus that also minimizes the

impact on the climate and our natural environment.

TCO Certiﬁed is a third party veriﬁed program, where every product model is tested by an accredited

impartial test laboratory. TCO Certiﬁed represents one of the toughest certiﬁcations for displays

worldwide.

Some of the Usability features of the TCO Certiﬁed for displays:

 Good visual ergonomics and image quality is tested to ensure top performance and reduce sight

and strain problems. Important parameters are luminance, contrast, resolution, black level,

gamma curve, color and luminance uniformity, color rendition and image stability

 Product have been tested according to rigorous safety standards at an impartial laboratory

 Electric and magnetic ﬁelds emissions as low as normal household background levels

 Low acoustic noise emissions

Some of the Environmental features of the TCO Certiﬁed for displays:

 The brand owner demonstrates corporate social responsibility and has a certiﬁed environmental

management system (EMAS or ISO 14001)

 Very low energy consumption both in on- and standby mode minimize climate impact

 Restrictions on chlorinated and brominated ﬂame retardants, plasticizers, plastics and heavy

metals such as cadmium, mercury and lead (RoHS compliance)

 Both product and product packaging is prepared for recycling

 The brand owner oﬀers take-back options

The requirements can be downloaded from our web site. The requirements included in this label have

been developed by TCO Development in co-operation with scientists, experts, users as well as

manufacturers all over the world. Since the end of the 1980s TCO has been involved in inﬂuencing

the development of IT equipment in a more user-friendly direction. Our labeling system started with

displays in 1992 and is now requested by users and IT-manufacturers all over the world. About 50%

of all displays worldwide are TCO certiﬁed.

For more information, please visit

www.tcodevelopment.com

Mandate:

For displays that have a gloss value G (60°) >30 gloss units the following consideration note for

the placement of the FPD shall be given in the user manual.

“For displays with glossy bezels the user should consider the placement of the display as the

bezel may cause disturbing reflections from surrounding light and bright surfaces.”

Produktspecifikationer

Varumärke:	Hannspree
Kategori:	Övervaka
Modell:	HL195ABB
Färg på produkten:	Zilver
Höjd:	500 mm
Förpackningens bredd:	570 mm
Djuppackning:	158 mm
Förpackningshöjd:	103 mm
Justerbar i höjdled:	Ja
Monteringsmetod:	Bureau
Ursprungsland:	Taiwan
Maximal viktkapacitet:	10 kg
Panelmonteringsgränssnitt:	75 x 75, 100 x 100 mm
Rotationsvinkel:	360 °
Montage:	Klem
Kompatibilitet med monteringsgränssnitt (min):	75 x 75 mm
Kompatibilitet med monteringsgränssnitt (max):	100 x 100 mm
Antal skärmar som stöds:	1
(Ytter) huvudpaketets höjd:	260 mm
(Ytter) huvudförpackningens bredd:	600 mm
(Ytre) huvudpaketets längd:	355 mm
Kvantitet per (yttre) huvudkartong:	4 stuk(s)
Tiltvinkelområde:	0 - 180 °
Maximal skärmstorlek:	30 "
Harmoniserad systemkod (HS):	85299097
Produkter per pall (EU):	112 stuk(s)
Minsta skärmstorlek:	10 "
Höjdjusteringsområde:	0 - 500 mm
Typ av höjdjustering:	Handmatig
Djupjusteringsområde:	120 - 500 mm