Harley Davidson J04409 (2011) Bruksanvisning

Läs gratis den bruksanvisning för Harley Davidson J04409 (2011) (6 sidor) i kategorin Motor. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 3 recensioner. Har du en fråga om Harley Davidson J04409 (2011) eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

-J04409 2011-10-20

FAT BOY DETACHABLE SADDLEBAGS

GENERAL

Kit Number

88306-07A, 90200616A

Models

For model fitment information,see the P&A Retail Catalogor

the Parts and Accessories section of www.harley-davidson.com

(English only).

Additional Parts Required

All models require separate purchase of Rear Directional

RelocationKit P/N 69929-07.

Models equipped with Detachable Accessories require separate

purchase of Docking Hardware Kit P/N 88256-07.

Models without DetachableAccessories require separate

purchase of Docking Hardware Kit P/N 53932-03.

Models equipped with Rigid Accessoriesrequireseparate

purchase of Docking Hardware Kit P/N 88298-07.

Loctite® 243 (Blue) Threadlocker and Sealant P/N 99642-97.

WARNING

The rider'ssafety depends uponthe correct installationof

this kit.Use the appropriateservice manual procedures.

If theprocedure is not withinyour capabilities or youdo

not have the correct tools,havea Harley-Davidson dealer

perform the installation. Improper installation of this kit

could result in death or serious injury. (00333a)

NOTE

This instruction sheet referencesservice manual information.

Aservice manualfor your modelmotorcycleis required for this

installation and is availablefrom a Harley-Davidson Dealer.

Kit Contents

See Figure 8 and Table 1.

NOTE

Maximum saddlebag weight capacityis 10 pounds (4.5 Kg.).

WARNING

Federal Motor Vehicle Safety Standard (FMVSS) 108

requires motorcyclesto beequipped withrearandside

reflectors. Be sure rearand side reflectors are properly

mounted. Poor visibility of rider to other motorists can

result in death or seriousinjury.(00336b)

WARNING

The rider'ssafetydependsuponthecorrect installationof

this kit.Use the appropriateservice manual procedures.

If theprocedure is not withinyour capabilities or youdo

nothave the correct tools, have a Harley-Davidson dealer

perform the installation. Improper installation of this kit

could result in death or serious injury. (00333a)

INSTALLATION

Install Turn Signal Relocation Kit

1.Install the turn signal relocation kit using the instruction

sheet provided in that kit.

Docking Point Installation

1.Refer to the instructionsincluded with the Docking

Hardware Kit.

Install Rear Docking Adapter

NOTE

This procedure only applies to modelsequipped withnot

detachable accessories.

1.See Figure 1. Insert rear docking adapter (1) into holes in

saddlebag bracket and hold into place.

2.Install rear dockingadapter usingscrew (2) and nut (3).

Tighten snugly.

3.Repeat for other saddlebag.

3

2

1

is05092

Rear docking adapter1.

Screw2.

Nut3.

Figure 1. Install Rear Docking Adapter

1 / 6

Many Harley-Davidson® Parts & Accessories are made of plastics andmetals which can be recycled.

-J04409

Please dispose of materials responsibly.

Produktspecifikationer