Havis C-DMM-129 Bruksanvisning
Havis
Inte kategoriserad
C-DMM-129
Läs gratis den bruksanvisning för Havis C-DMM-129 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 11.5 recensioner. Har du en fråga om Havis C-DMM-129 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
C-DMM-129_INST_2-15
INSTALL INSTRUCTIONS
C-DMM-129
2015-2017 DODGE CHARGER SWING-OUT DASH MONITOR MOUNT
NOTE: WILL NOT WORK ON 12.1 INTEGRATED TOCUH SCREEN MODELS
T p1-he Dash Monitor Mount bracket system requires two or three main parts that are Sold
Separately. See web site Monitor Configurator for more detailed bracket information.
http://www.havis.com/monitor_mounts.htm
1 - Vehicle Specific dash mount bracket. (C-DMM-129)
1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-129 and C-MM-2XX. It may not be required
in some applications.
he Dash Monitor Mount bracket system requires two or three main parts that are
Sold Separately. See web site Monitor Configurator for more detailed bracket
information. http://www.havis.com/monitor_mounts.htm
1 - Vehicle Specific dash mount bracket. (C-DMM-130)
1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-130 and C-MM-2XX. It may not be
required in some applications.
TOOLS REQUIRED:
• Ratchet Wrench • Air saw / Utility knife / other? (to cut plastic dash part)
• Socket Set
• Open End Wrench - 7/16”
• Phillips Screwdriver
MOUNT BRACKET PARTS and HARDWARE:
QTY: DESCRIPTION: PART #:
1 Forward Lower Support Bracket CM007051
1 Rear Lower Support Bracket CM007038
1 Upper Support Bracket CM004416
6 1/4 Hex Flange Serrated Nut GSM30023
2 10/32 x 1/2" Phillips Pan head machine screw GSM34097
2 8/32 x 1/2" Phillips Pan head machine screw GSM33110
2 1/4 x 1/2" Carriage Bolt GSM31999
2 # 10” Flat Washer SS GSM31046
2 # 10” Lock Washer SS GSM31065
2 10/32 x 1" Phillips Flat head machine screw GSM33073
2 10/32 Nylock nut GSM30015-1
2 # 10 Flat Washer GSM31003
1 # 10 x 1” Phillips Flat head sheet metal screw GSM33152
1 Small “L” bracket CM93094
1 Monitor Adapter Hardware Varies (monitor specific)
ALWAYS!
• Read all instructions before installing any Havis, Inc products.
• Use hardware provided with install kit
Note: The swing door utilizes a gas spring to assist in opening the door and to eliminate the
possibility of it slamming shut. If additional damping is desired because of heavier equipment, an
optional stronger gas spring is available under Part Number CM86662-30 (sold separately) Installer
must change out gas spring as needed.
Produktspecifikationer
| Varumärke: | Havis |
| Kategori: | Inte kategoriserad |
| Modell: | C-DMM-129 |
Behöver du hjälp?
Om du behöver hjälp med Havis C-DMM-129 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Havis Manualer
16 Februari 2025
16 Februari 2025
16 Februari 2025
31 Januari 2025
31 Januari 2025
31 Januari 2025
24 September 2024
24 September 2024
24 September 2024
24 September 2024
Inte kategoriserad Manualer
- Profoto
- Fiilex
- Blaser
- Broan
- SWIT
- Kenko
- Dremel
- Princeton Tec
- Berger & Schröter
- G3
- Fine Dine
- SMART Technologies
- Patton
- Carrier
- Patriot
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025