Hifonics SWVL-1B Bruksanvisning

Läs gratis den bruksanvisning för Hifonics SWVL-1B (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4 recensioner. Har du en fråga om Hifonics SWVL-1B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Step 1 Detach the Speaker from the pod housing
by loosening the 4 screws.
NOTE – Be mindful of the speaker wiring. Remove
Cautiously.
Step 2 Remove the clamp base by loosening the
nuts and screws.
Step 3 Attach the swivel mount to pod
housing using the supplied longer
screws and existing nuts.
NOTE – Rotating the top of the
swivel mount 90 degrees will
give you access the mounting
hole. Make sure the adjustment
locking screw is pointed toward
the rear of the pod.
Step 4 Attach the clamp base to
the swivel mount using the provided
shorter screws.
Step 5 Reattach the speaker to
pod housing using the 4 screws.
Step 6 Install the pod speaker in
the desired location.
NOTE – Refer to the pod speaker
manual for the proper installation
process.
Step 7 Fine-tune the desired mounting angle. Secure the placement
by tightening the adjustment locking screw located on the base of the
swivel mount.
Adjustment Locking Screw
Swivel Mount Bracket Installation
HF SWVL QSG 01 - rev1
Quick Start
Installation Guide
Swivel Mount Bracket

Produktspecifikationer

Varumärke: Hifonics
Kategori: Inte kategoriserad
Modell: SWVL-1B

Behöver du hjälp?

Om du behöver hjälp med Hifonics SWVL-1B ställ en fråga nedan och andra användare kommer att svara dig