Hikoki WR 25SE Bruksanvisning
Hikoki
Inte kategoriserad
WR 25SE
Läs gratis den bruksanvisning för Hikoki WR 25SE (21 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 7.5 recensioner. Har du en fråga om Hikoki WR 25SE eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/21
Handling instructions
Iнструкції щодо поводження з пристроєм
Инструкция по эксплуатации
WR 22SE WR 25SE •
en
uk
ru
WR25SE
en
uk
ru
2
English
c) Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carryingpowertoolswith yournger on theswitch
or energising power tools that have the switch on
invitesaccidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
Awrenchora keyleft attachedto arotatingpartof
thepowertoolmayresultinpersonalinjury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpectedsituations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
Looseclothes,jewelleryorlonghaircanbecaughtin
movingparts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action can cause severe injurywithin a
fractionofasecond.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
Thecorrectpowertoolwilldothejobbetterandsafer
attherateforwhichitwasdesigned.
b) Do not use the power tool if the switch does not
turn it on and o.
Any power tool that cannot be controlled with the
switchisdangerousandmustberepaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Suchpreventivesafetymeasuresreducetheriskof
startingthepowertoolaccidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Powertoolsaredangerousinthehandsofuntrained
users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may aect the power toolʼs operation. If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
powertools.
f) Keep cutting tools sharp and clean.
Properlymaintainedcutting tools withsharpcutting
edgesarelesslikelytobindandareeasiertocontrol.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool for operations dierent from
thoseintendedcouldresultinahazardoussituation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and
specications provided with this power tool.
Failure to follow all instructions listed below may result in
electricshock,reand/orseriousinjury.
Save all warnings and instructions for future reference.
Theterm“powertool”inthewarningsreferstoyourmains-
operated(corded)powertoolorbattery-operated(cordless)
powertool.
1) Work area safety
a) Keep work area clean and well lit.
Clutteredordarkareasinviteaccidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust.
Powertoolscreatesparkswhichmayignitethedust
orfumes.
c) Keep children and bystanders away while
operating a power tool.
Distractionscancauseyoutolosecontrol.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodiedplugs and matching outlets will reduce
riskofelectricshock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
bodyisearthedorgrounded.
c) Do not expose power tools to rain or wet
conditions.
Waterenteringapowertoolwillincreasetheriskof
electricshock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electricshock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use ofacordsuitableforoutdoor usereducesthe
riskofelectricshock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
UseofanRCDreducestheriskofelectricshock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or
medication.
Amomentofinattentionwhileoperatingpowertools
mayresultinseriouspersonalinjury.
b) Use personal protective equipment. Always
wear eye protection.
Protectiveequipmentsuchasadustmask,non-skid
safetyshoes,hardhatorhearingprotectionusedfor
appropriateconditionswillreducepersonalinjuries.
(Original instructions)
3
English
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpectedsituations.
5) Service
a) Have your power tool serviced by a qualied
repair person using only identical replacement
parts.
Thiswillensure thatthesafety of thepower toolis
maintained.
PRECAUTION
Keep children and inrm persons away.
When not in use, tools should be stored out of reach of
children and inrm persons.
IMPACT WRENCH SAFETY
WARNINGS
○ Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
ADDITIONAL SAFETY WARNINGS
1. When using the tool at a hight, make sure that there is
nobody below.
2. Use earplugs if using for a long time use.
3.
Switch the reversing switch only after the motor has stoped
when it is necessary to change the direction of the rotation.
4. Use a step up transformer when a long extension cable
is used.
5. Conrmthetighteningtorquebyatorquewrenchbefore
useinordertoassertainthecorrecttighteningtorqueto
be used.
6. Assemble the socket securely to the impact wrench with
the socket pin and ring.
7. Conrmwhetherthesockethasanycracksinit.
8. Always hold the handle and side handle of the impact
wrench rmly. Otherwise the counterforce produced
may result in inaccurate and even dangerous operation.
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
WR22SE / WR25SE : Impact Wrench
To reduce the risk of injury, user must read
instruction manual.
OnlyforEUcountries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
onwasteelectricalandelectronicequipmentand
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
SwitchingON
SwitchingOFF
Clockwise rotation
Counterclockwise rotation
Disconnect mains plug from electrical outlet
Class toolII
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ Case ...........................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tighteningandloosingvariouskindsofboltandnut.
SPECIFICATIONS
Model WR22SE WR25SE
Voltage (by areas)* (110V, 120V, 230V, 240V)
Power input* 800 W 900 W
Noloadspeed/Impact
rate
1400 / 2000 min-1 1100 / 1500 min-1
Squaredrive 19 mm 25.4 mm
Capacities
(size of
bolts)
High
tension bolt M16―M22 M22―M24
Ordinary
bolt M14―M24 M22―M30
Tighteningtorque
(Max.)** 620N·m 1000N·m
Weight*** 5.2 kg 8.4 kg
* Be sure to check the nameplate on product as it is
subject to change by areas.
**
Tightening the bolt without extension cord at rated voltage.
*** Weight: According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the specications herein are subject to
change without prior notice.
MOUNTING AND OPERATION
CAUTION
Toprevent accidents,make sureto turnthe switch o
and disconnect the plug from the receptacle.
Action Figure Page
Mounting the socket (1) 1 13
Mounting the side handle 2 13
Changing the rotation direction 3 13
Dismounting the hook hanger (WR25SE)
413
Selecting accessories* ―15
* Selectaccessoriesthataresuitedtoaspecictask.
FordetailscontactHiKOKIAuthorizedServiceCenter.
Produktspecifikationer
| Varumärke: | Hikoki |
| Kategori: | Inte kategoriserad |
| Modell: | WR 25SE |
Behöver du hjälp?
Om du behöver hjälp med Hikoki WR 25SE ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Hikoki Manualer
1 Mars 2025
21 December 2024
27 Oktober 2024
24 September 2024
24 September 2024
17 September 2024
17 September 2024
16 September 2024
14 September 2024
14 September 2024
Inte kategoriserad Manualer
- Linq
- Daitsu
- Lansinoh
- Westinghouse
- Abac
- Zanussi
- EVOLVEO
- Diana
- IXS
- Olimpia Splendid
- Elkay
- Ocean Way Audio
- Milesight
- Wortmann AG
- Grothe
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025