Hikvision AE-DC5013-F6PRO Bruksanvisning
Läs gratis den bruksanvisning för Hikvision AE-DC5013-F6PRO (2 sidor) i kategorin Dashcam. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om Hikvision AE-DC5013-F6PRO eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
A
1
A Packing List
2
B Parts Introduction
3
C Installation
4
D Mobile Phone Connection
5
6
E Function Description
F Cautions
Dashcam F6
1
3
4
5
6
2
.
Model
Aperture
Pixel
Resolution
Angle
Screen
Storage
G-Sensor
Wi-Fi
Bluetooth
Sound Recording
Power Supply
Power Consumption
Operating Temperature and Humidity
Installation Type
Dimensions (L × W × H)
Weight
AE-DC5013-F6
F1.6
5 MP
1600p @ 30fps
130°
No
TF card, 16 GB to 128 GB
Built-in, collision triggered recording and recording lock
Yes
No
Yes
5 VDC, 2 A
3.5 W
-20 °C to 70 °C
(-4 F to 158 F), 95%
General
52 × 50 × 97 mm (2.0ʺ × 2.0ʺ × 3.8ʺ)
Scan QR Code
<
Specications
4
5
7
8
9
6
1
2
3
User Manual
1
3 4
2
2
5
6
0
X
1
6
0
0
P
2
5
6
0
X
1
6
0
0
P
1. Dashcam × 1
2. Car Charger × 1
3. Tape × 1
4. Power Cord × 1
5. Electrostatic Film × 1
6. User Manual × 1
1. Power Interface
2. Interface for 4G Box
3. Speaker
4. TF Card Slot
6. Bracket
5. Recording Indicator (Red/Blue)
• Solid blue light: Recording is
normal.
• Solid red light: Recording is
abnormal.
• Flashing light: The app is
connected.
7. Lens
8. Microphone
9. Reset Button
• Press Reset Button: Reboot the
dashcam.
• Hold Reset Button: When you
hear the prompt sound, it
means the dashcam is restored
to defaults.
Clean the windscreen and
paste the electrostatic lm
onto it.
Avoid introducing air bubble.
DO NOT paste the lm
repeatedly.
Install the dashcam onto the
center of the electrostatic
lm. Connect the dashcam
with one end of the power
cord along the red line
shown in gure.
Connect the other end of
power cord to car charger
and connect car charger to
cigarette lighter.
Adjust the surveillance
angle and the installation is
completed.
Scan the QR code to download and
install HikDashcam app.
Add the dashcam to the app.
a. Run the HikDashcam app.
b. Tap Wi-Fi Connection.
c. In Wi-Fi list, select the Wi-Fi SSID
of the target dashcam and enter
Wi-Fi password to build
connection.
• You can set the parameters of the
dashcam.
• For iOS, you need to go to Wi-Fi
settings of your phone to connect
to the Wi-Fi of dashcam.
Edit the dashcam password to
activate it to avoid abnormal
recording after connecting to Wi-Fi.
1
Dashcam Wi-Fi default parameters:
• Wi-Fi SSID: HIKVISION-F6-XXXX
(XXXX refers to the last four
characters of verication code.)
• Wi-Fi password: 1234567890
(please edit password after logging in
for the rst time.)
Power On and Power O
Power On: When you starts up the engine, the dashcam powers on.
Power O: When you turn o the engine, the dashcam powers o.
Recording
Two recording types are provided: Normal Reording and Emergency
Recording. Sound and mute recordings are selectable. Sound recording
is set as default. You can turn o sound in app.
Safety Instruction
These instructions are intended to ensure that users can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings
are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Cautions
• In the use of the dashcam, you must be in strict compliance with
the local laws and regulations.
• Keep the user manual properly for future reference. See initial
connection of dashcam in user manual.
• Purchase the TF card from legal channel. To ensure safe and
stable data transmission, it is recommended to use TF card of
Class 10 or above.
• To protect TF card from damage, shut down the dashcam before
installing and uninstalling TF card.
• If the dashcam is directly connected with the vehicle power
system, you are recommended to power o the dashcam when
the engine is o. Disconnect cigarette lighter to avoid insucient
voltage and abnormal startup. Reconnect cigarette lighter to
ensure dashcam work normally when you start the car again.
• Operating temperature is from -20 C to 70 C (-4 F to 158 F). To
protect the dashcam, DO NOT use it in high temperature, low
temperature, or high-humidity environment. Keep the dashcam
from rain and dust.
• The manual is subject to update. The functions of dashcam may
vary according to dierent models.
1
2
3
Power Cord
Car Charger
Cigarette
Lighter
• The power mode of cigarette lighter may vary by dierent vehicle
types. Some may be powered constantly. In this case, please
make sure that the dashcam stops after you turn o the vehicle
engine. Otherwise, insucient voltage may occur to vehicle battery.
• Make sure you have connected the dashcam to power according to
Step 2 and Step 3 in Installation section.
Approx. 135 g (0.3 lb.)
GPS Yes (AE-DC5013-F6 PRO)
Produktspecifikationer
| Varumärke: | Hikvision |
| Kategori: | Dashcam |
| Modell: | AE-DC5013-F6PRO |
Behöver du hjälp?
Om du behöver hjälp med Hikvision AE-DC5013-F6PRO ställ en fråga nedan och andra användare kommer att svara dig
Dashcam Hikvision Manualer
23 Oktober 2025
7 Februari 2025
19 December 2024
19 December 2024
19 December 2024
26 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Dashcam Manualer
- DOD
- Ion
- Lamax
- Transcend
- Insignia
- Mobileye
- Minolta
- Brigmton
- Carmera
- Osram
- Waeco
- Nextbase
- Hama
- Navitel
- JVC
Nyaste Dashcam Manualer
19 Oktober 2025
15 Oktober 2025
14 Oktober 2025
14 Oktober 2025
14 Oktober 2025
13 Oktober 2025
6 Oktober 2025
30 September 2025
30 September 2025
29 September 2025