Hikvision DS-3E0105P-E Bruksanvisning

Hikvision brytare DS-3E0105P-E

Läs gratis den bruksanvisning för Hikvision DS-3E0105P-E (2 sidor) i kategorin brytare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7 recensioner. Har du en fråga om Hikvision DS-3E0105P-E eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Applicable Models

This manual is applicable to DS-3E0105XX and DS-3E0109XX series 100M long-range PoE

switch.

Symbol Convenons

The symbols that may be found in this document are deﬁned as follows.

·During the installaon and ulizaon of the device, please strictly conform to electrical

safety rules in diﬀerent naons and regions.

·Ensure to use the aached power adaptor only and not to change the adaptor randomly.

Please refer to speciﬁcaon table for speciﬁc requirements of power adaptor.

·If the product does not work properly, please contact your dealer or the nearest service

center. Never aempt to disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

·The device must be installed in machine room only, and only maintenance staﬀ or

qualiﬁed person should access to the device.

·Do not touch the upper cover area of the device that may be overheated.

·Power must be shut down during cable connecon, device installaon and

dismantlement.

·You shall acknowledge that the use of the device with Internet access might be under

network security risks, please strengthen protecon for your personal informaon and

data security. If you ﬁnd the device might be under network security risks, please contact

with us.

·Proper conﬁguraon of all passports and other security sengs is the responsibility of

the installer, and you shall keep user name and passports properly.

·Please keep all original packing materials properly. If the product does not work

properly, pack the switch in its original packing materials for shipping. We shall not assume

any responsibility for damages caused by improper packing materials during shipping.

·Ensure that your devices powered via the PoE port have their shells protected and

ﬁre-proofed, because the switches are not compliant with the Limited Power Source (LPS)

standard.

Device Connecon

Connect your devices according to your actual networking requirements.

Interfaces

Rear Panel

Grounding Terminal

Power Interface

DIP Switch

On: Extend model is on, connecng PoE port 1-4 (4 ports), 1-8 (8 ports).

Oﬀ: Extend model is oﬀ.

Grounding Terminal

The grounding terminal connects with ground cable in case of lightning.

Power Port

Connect power port of the switch with power socket with power cord

to provide power to the switch.

Front Panel

Packing List

Switch x 1

Quick Start Guide x 1

Power Adapter x 1

DC 48V

DIP Switch

PoE Ports

100M PoE ports connect to other PoE devices with network cable.

UPLINK

100M network port connects to other switches with network cable.

PWR Indicator

Solid means powered up normally. Unlit means no power supply

connected or power supply is abnormal.

PoE-MAX Indicator

Solid/ﬂashing means the output power of the switch will reach the

upper limit, and the power supply may be abnormal if more devices

are connected. Unlit means power supplying is normal.

DS-3E0105XX Series：

DS-3E0109XX Series：

1 2 3 54

LINK/ACT Indicator

PoE Indicator

PoE-MAX Indicator

PWR

Indicator

PoE Ports

UPLINK

1 2 3 5 6 7 94 8

PoE-MAX Indicator

PWR

Indicator

LINK/ACT Indicator PoE Indicator

PoE Ports

UPLINK

Indicates a hazard with a high level of risk, which if

not avoided, will result in death or serious injury.

Symbol Descripon

Provides addional informaon to emphasize or

supplement important points of the main text.

Indicates a potenally hazardous situaon, which if not

avoided, could result in equipment damage, data loss,

performance degradaon, or unexpected results.

6 KV Surge Protection

Data

Power+Data(PoE)

Up to 300 meters

(Port 1-4)

4-Port 10/100M PoE

10/100M Unmanaged PoE Pro-Series

Produktspecifikationer

Varumärke:	Hikvision
Kategori:	brytare
Modell:	DS-3E0105P-E
Vikt:	299 g
Bredd:	132 mm
Djup:	93.3 mm
Höjd:	27.6 mm
Strömförbrukning (max):	63 W
Kabelteknik:	10/100Base-T(X)
Uteffekt:	1.25 A
Rackmontering:	Nej
Strömförsörjning ingår:	Ja
Maximal dataöverföringshastighet:	100 Mbit/s
Spänning:	51 V
Full duplex:	Ja
Överspänningsskydd:	4 kV
Produktens färg:	Blå
Datahastighet för Ethernet-LAN:	10, 100 Mbit/s
Strömförsörjning via Ethernet (PoE) stöd:	Ja
Antal LAN (RJ-45) anslutningar:	5
Strömförbrukning (vanlig):	632 W
Total Power over Ethernet (PoE)-budget:	58 W
Power over Ethernet (PoE)-effekt per port:	15.4 W
Temperatur vid drift:	0 - 40 ° C
Intervall för relativ operativ luftfuktighet:	10 - 90 %
Fuktighet (förvaring):	5 - 90 %
Kommunikationsstandarder:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Harmonized System (HS)-kod:	85176990
Adresstabellstorlek:	1000 poster
Switch kapacitet:	1 Gbit/s
10G stöd:	Nej
Flödeskontroll:	Ja
Antal grundläggande RJ-45 Ethernet-portar:	1
Typ av grundläggande RJ-45 Ethernet-portar:	Fast Ethernet (10/100)
Switch typ:	Ohanterad
Power over Ethernet (PoE)-portar kvantitet:	4
Antal strömförsörjningsaggregat:	1