Hikvision DS-KD9203-TE6 Bruksanvisning

Hikvision Intercomsystem DS-KD9203-TE6

Läs nedan 📖 manual på svenska för Hikvision DS-KD9203-TE6 (72 sidor) i kategorin Intercomsystem. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/72
Video Intercom Face Recognion
Door with 4.3-inch ScreenStaon
User Manual
Legal Informaon
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes for using and managing the Product.instrucons
Pictures, charts, images and all other informaon hereinaer are for
descripon explanaon and only. The contained in the Manualinformaon
is subject to change, without noce, rmware due to updates or other
reasons. Please the latest version of this Manual at the Hikvisionnd
website ( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals
trained in supporng the Product.
Trademarks
and other Hikvision's trademarks and logos are the
properes of Hikvision in various jurisdicons.
Other trademarks and logos are the menoned properes of their
respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS".
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS
AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
i
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,
FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and
processed. To protect data, the development of Hikvision devices
incorporates privacy by design principles. For example, for device with facial
recognion features, biometrics data is stored in your device with
encrypon ngerprint ngerprint method; for device, only template will be
saved, which is impossible to reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and transfer
data in accordance with the applicable data protecon laws and regulaons,
including without security controls to safeguardlimitaon, conducng
personal data, such as, reasonable implemenng administrave and
physical security controls, conduct periodic reviews and assessments of the
eecveness of your security controls.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
ii
Symbol Convenons
The symbols that may be found in this document are as follows.dened
Symbol Descripon
Danger Indicates a hazardous which, if not avoided, will orsituaon
could result in death or serious injury.
Cauon Indicates a hazardous which, if notpotenally situaon
avoided, could result in equipment damage, data loss,
performance degradaon, or unexpected results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
Video Intercom Face Door with 4.3-inch Screen User ManualRecognion Staon
iii
Safety Instrucon
Warning
All the electronic operaon should be strictly compliance with the electrical safety
regulaons, re prevenon regulaons and other related in your localregulaons
region.
Please use the power adapter, which is provided by normal company. The power
consumpon cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may
cause over-heat or hazard.re
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
When the product is installed on wall or ceiling, the device shall be rmly xed.
If smoke, odors or noise rise from the device, turn o the power at once and
unplug the power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest
service center. Never to disassemble the device yourself. (We shall notaempt
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cauon
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. installaon vibraons Avoid the equipment on
surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the of the devicespecicaon
for the detailed temperature), cold, dusty or damp and do notoperang locaons,
expose it to high electromagnec radiaon.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low or heat source such asvenlaon
heater or radiator is forbidden (ignorance can cause re danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a however), and malfuncon aecng the
endurance of sensor at the same me.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
iv
Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the may erode thengers
surface coang of the device cover.
Please use a and dry cloth when clean inside and outside surfaces of theso
device cover, do not use alkaline detergents.
Please keep all wrappers unpack them for future use. In case of any failureaer
occurred, you need to return the device to the factory with the original wrapper.
Transportaon without the original wrapper may result in damage on the device
and lead to addional costs.
Improper use or replacement of the may result in hazard of explosion.baery
Replace with the same or equivalent type only. Dispose of used baeries
according to the provided by the manufacturer.instrucons baery
Improper replacement of the with an incorrect type may defeat abaery
safeguard (for example, in case of some lithium types).baery
Do not dispose of the baery re into or a hot oven, or mechanically crush or cut
the baery, which may result in an explosion.
Do not leave the baery in an extremely high temperature surrounding
environment, which may result in an explosion or leakage of liquid orammable
gas.
Do not subject the to extremely low air pressure, which may result in anbaery
explosion or the leakage of ammable liquid or gas.
CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
v
Regulatory Informaon
FCC Informaon
Please take that changes or not expressly approvedaenon modicaon
by the party responsible for compliance could void the users authority to
operate the equipment.
FCC compliance: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable against harmfulprotecon
interference in a residenal installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not
occur in a If this equipment does cause harmfulparcular installaon.
interference to radio or television recepon, which can be determined by
turning the equipment and on, the user is encouraged to try to correcto
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to
the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operaon.
This equipment complies with FCC/IC RSS-102 radiaon exposure limits set
forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your
body.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
vi
ce matériel est conforme aux limites de dose d'exposion aux
rayonnements, FCC / CNR-102 énoncée dans un autre environnement.cee
eqipment devrait être installé et exploité avec distance minimale de 20
entre le radiateur et votre corps.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Direcve
2014/30/EU, the RoHS 2011/65/EUDirecve
2012/19/EU (WEEE Products marked with this symboldirecve):
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated points. For more collecon informaon
see: www.recyclethis.info
2006/66/EC This product contains a (baery direcve): baery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product for documentaon specic
baery informaon. baery The is marked with this symbol,
which may include to indicate cadmium (Cd), lead (Pb),leering
or mercury (Hg). For proper recycling, return the baery to your
supplier or to a designated point. For more collecon informaon
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operaon is subject to the following two condions:
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
vii
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may
cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radioexempts de licence. L'exploitaon est autorisée aux deux
condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est d'en suscepble compromere le
fonconnement.
Under Industry Canada this radio may only operateregulaons, transmier
using an antenna of a type and maximum (or lesser) gain approved for the
transmier by Industry Canada. To reduce radio interference topotenal
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur
radio peut fonconner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour par Industrie Canada. Dans le but del'émeeur
réduire les risques de brouillage radioélectrique à des autresl'intenon
ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
Cet équipement doit être installé et à une distance minimale de 20ulisé
cm entre le radiateur et votre corps.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
viii
Contents
1 Appearance ................................................................................................ 1
2 Terminal and Wiring ................................................................ 4Descripon
2.1 Terminal ......................................................................................... 4Descripon
2.2 Wiring ............................................................................................ 5Descripon
2.2.1 Door Lock Wiring ...................................................................................... 5
2.2.2 Exit Wiring .................................................................................... 6Buon
2.2.3 Door Contact Wiring ................................................................................. 7
3 Installaon .................................................................................................. 8
3.1 Gang Box ........................................................................................................... 8
3.2 Flush with Gang Box ......................................................................... 9Mounng
4 ................................................................................................. 11Acvaon
4.1 Acvate Device Locally .................................................................................... 11
4.2 Acvate Soware Device via Client ................................................................. 12
4.3 Acvate Device via Web .................................................................................. 13
5 Local Operaon ........................................................................................ 14
5.1 Local Conguraon ......................................................................................... 14
5.1.1 Edit Network Parameters ........................................................................ 14
5.1.2 Local .......................................................................................... 14Sengs
5.1.3 Add Residents ......................................................................................... 15
5.1.4 About ...................................................................................................... 16
5.2 Video Intercom .............................................................................. 17Operaon
5.2.1 Call Resident ........................................................................................... 17
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
ix
5.2.2 Call Center .............................................................................................. 17
5.3 Unlock Door .................................................................................................... 17
5.3.1 Unlock by Password ................................................................................ 17
5.3.2 Unlock by Presenng Card ...................................................................... 18
5.3.3 Unlock by Fingerprint ............................................................................. 18
5.3.4 Unlock by Face ........................................................................................ 18
6 Remote Conguraon via Web ................................................................ 20
6.1 Live View ......................................................................................................... 20
6.2 User Management .......................................................................................... 20
6.3 Device Management ....................................................................................... 21
6.4 Parameters Sengs ........................................................................................ 22
6.4.1 System ....................................................................................... 22Sengs
6.4.2 Network Sengs .................................................................................... 25
6.4.3 Video & Audio ........................................................................... 30Sengs
6.4.4 Display Sengs ....................................................................................... 33
6.4.5 Event ......................................................................................... 34Sengs
6.4.6 Intercom .................................................................................... 37Sengs
6.4.7 Access Control ........................................................................... 38Sengs
6.4.8 Smart ......................................................................................... 42Sengs
7 Conguraon via Client ............................................................. 45Soware
7.1 Edit Network Parameters ................................................................................ 45
7.2 Add Device ...................................................................................................... 45
7.2.1 Add Online Device .................................................................................. 45
7.2.2 Add Device by IP Address ....................................................................... 46
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
x
7.2.3 Add Device by IP Segment ...................................................................... 46
7.3 Remote ..................................................................................... 47Conguraon
7.4 Device Management ....................................................................................... 47
7.5 Organizaon Management ............................................................................. 47
7.5.1 Add Organizaon .................................................................................... 47
7.5.2 Modify and Delete Organizaon ............................................................. 48
7.6 Person Management ....................................................................................... 48
7.6.1 Add Person ............................................................................................. 48
7.6.2 Modify and Delete Person ...................................................................... 49
7.6.3 Import and Export Person Informaon .................................................. 50
7.6.4 Get Person Informaon from Device ...................................................... 50
7.6.5 Change Person to Other Organizaon .................................................... 51
7.6.6 Issue Card in Batch ................................................................................. 51
7.6.7 Permission ................................................................................. 53Sengs
7.7 Video Intercom .................................................................................. 54Sengs
7.7.1 Receive Call from Door ............................................................... 54Staon
7.7.2 Live View via Door ...................................................................... 55Staon
7.7.3 Release ........................................................................................ 55Noce
7.7.4 Search Video Intercom ....................................................... 56Informaon
A. Appendix ................................................................................................. 58
B. Matrix and Device Command ....................................... 59Communicaon
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
xi
1 Appearance
Door without Fingerprint ModuleStaon
Figure 1-1 Appearance of Door without Fingerprint ModuleStaon
Table 1-1 Descripon
No. Descripon
1 Camera
2 IR Supplement Light
3 Screen
4 Loudspeaker
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
1
No. Descripon
5Buons
6 Microphone
7 Card Reading Area
8 TAMPER
Door with Fingerprint ModuleStaon
Figure 1-2 Appearance of Door with Fingerprint ModuleStaon
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
2
Table 1-2 Descripon
No. Descripon
1 Camera
2 IR Supplement Light
3 Screen
4 Loudspeaker
5Buons
6 Microphone
7 Card Reading Area/ Fingerprint Recognion
Module
8 TAMPER
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
3
Name Terminal Descripon
DOOR NC1 Door Lock Relay Output 1(Normally
Close)
COM1 Common Interface 1
NO1 Door Lock Relay Output 1(Normally
Open)
GND Grounding
NC2 Door Lock Relay Output 2(Normally
Close)
COM2 Common Interface 2
NO2 Door Lock Relay Output 2(Normally
Open)
GND Grounding
Power Supply DC 12 V 12 VDC Power Input
Note
Alarm input interface cannot be edited. Refers to the actual model.
You can only wire the SEN1/SEN2 terminal with the door contact. And wire the
BTN1/BTN2 terminal with the exit buon.
2.2 Wiring Descripon
2.2.1 Door Lock Wiring
Video Intercom Face Door Recognion Staon with 4.3-inch Screen User Manual
5
Figure 2-2 Door Lock Wiring
Note
Terminal NC1/COM1 is set as default for accessing electric bolt. Terminal NO1/
COM1 is set as default for accessing electric strike.
To connect electric lock in terminal NO2/COM2/NC2, it is required to set the
output of terminal NO2/COM2/NC2 to be electric lock with ClientiVMS-4200
Soware.
2.2.2 Exit WiringBuon
Wire the BTN1/BTN2 terminal with the door contact.
Here takes BTN1 for example.
Figure 2-3 Exit WiringBuon
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
6
3 Installaon
Note
Make sure the device in the package is in good and all the assemblycondion
parts are included.
The power supply the door staon supports is 12 VDC. Please make sure your
power supply matches your door staon.
Make sure all the related equipment is power-o installaon. during the
Check the product for the environment.specicaon installaon
3.1 Gang Box
Figure 3-1 Dimension of the Gang Box
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
8
Note
The dimension of the gang box is 364 mm (W) × 118 mm (H) × 40 mm (D).
The hole should be bigger than the actual size. The suggestedinstallaon
dimension of the hole is 364.3 mm (W) × 118.6 mm (H) × 40.2 mm (D).installaon
3.2 Flush with Gang BoxMounng
Steps
1. Cave an installaon hole in the wall. Pull the cable out from the wall.
Note
The suggested dimension of the installaon hole is 364.3 mm (W) × 118.6 mm
(H) × 40.2 mm (D).
The suggested length of the cables outside is 250 mm.le
2. Install the gang box into the wall.
1) Remove the sheet of the gang box with the tool.plasc
2) Insert the gang box into the installaon hole. Mark the gang box screw holes'
posion with a marker, and take out the gang box.
3) Drill 4 holes according to the marks on the wall, and insert the expansion
sleeves into the screw holes.
4) Fix the gang box with 4 expansion bolts.
3. Fix the gap between the gang box and wall with concrete. Remove the mounng
ears with tool concrete is dry. Connect the cables according to the aer Wiring
Descripon.
4. Insert the door into the gang box. Slide the door down and itstaon staon x
with 2 set screws. Apply Silicone sealant among the joints between the device and
the wall (except the lower side) to keep the raindrop from entering.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
9
Figure 3-2 Flush with Gang BoxMounng
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
10
4 Acvaon
4.1 Acvate Device Locally
You are required to acvate rst sengs the device by a strong password for it
before you can use the device.
Steps
1. Power on the device to enter the acvaon automacally. page
2. Create a password and it.conrm
Table 4-1 Number Buon Descripon
No. No.Descripon Descripon
1 1 6 6mnoMNO
2 2abcABC 7 7pqrsPQRS
3 3defDEF 8 8tuvTUV
4 4ghiGHI 9 9wxyzWXYZ
5 5jklJKL 0 0
Hold 0 to enter special characters.
Table 4-2 Number Buon Descripon
No. No.Descripon Descripon
1 1,.#? 6 6_=+
2 2!@% 7 7[];:
3 3^$* 8 8"|<
4 4( )\ 9 9>{}
5 5&/-
Video Intercom Face Door Recognion Staon with 4.3-inch Screen User Manual
11
Note
The password required 8 to 16 characters.
The way to enter the password, take 2 as an example: Press 2 to enterbuon
the number '2' or hold 2 for 1.5 s and press 2 again to enter the character 'a'.
When you have entered the password, press # to switch to theconrm
password.
Press * to delete the wrong charater.
3. Press # to select language.
4. Aer selecon, nish acvaon. press # to
4.2 Acvate Device via Client Soware
You can only congure and operate the door staon aer creang a password for
the device acvaon.
Default parameters of door staon are as follows:
Default IP Address: 192.0.0.65.
Default Port No.: 8000.
Default User Name: admin.
Steps
1. Run the client soware, click Maintenance and Management → Device
Management → Device to enter the page.
2. Online DeviceClick .
3. Select an inacvated device and click Acvate.
4. Create a password, and conrm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, leers, lower case numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
5. OKClick to acvate the device.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
12
Note
When the device is not acvated, operaon the basic and remote ofoperaon
device cannot be performed.
You can hold the or key to select devices in the onlineCtrl Shi mulple
devices, and click the Acvate to buon acvate devices in batch.
4.3 Acvate Device via Web
You are required to acvate rst seng the device by a strong password for it before
you can use the device.
Default parameters of the door staon are as follows:
Default IP Address: 192.0.0.65.
Default Port No.: 8000.
Default User Name: admin
Steps
1. Power on the device, and connect the device to the network.
2. Enter the IP address into the address bar of the web browser, and click toEnter
enter the acvaon page.
Note
The computer and the device should belong to the same subnet.
3. Create and enter a password into the password eld.
4. Conrm the password.
5. OKClick to
acvate the device.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
13
5 Local Operaon
5.1 Local Conguraon
When entering conguraon buon page, the is used as follows.
Table 5-1 Buon Descripon
Buon Descripon Buon Descripon
2 Previous 8 Next
* Exit/Back # OK
5.1.1 Edit Network Parameters
Aer acvang, you should edit the network parameters.
Steps
1. * #Hold and at the same to enter the page.me authencaon
2. Authencate via administrator.
-Authencate face/card/ngerprint to login.
-Press to enter the password to login.#
3. Swritch to Network sengs according to the on the page. Press to enter theps #
sengs page.
4. Edit the parameters according to your needs.
5. *Press to save and exit.
5.1.2 Local Sengs
Congure the local parameters (including but not limited to, edit numbers and edit
recognion parameters).
Steps
1. * #Hold and at the same to enter the page.me authencaon
2. Authencate via administrator.
-Authencate face/card/ngerprint to login.
-Press to enter the password to login.#
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
14
3. Switch to Local according to the on the page.Sengs ps
4. #Press to enter the page.sengs
Door Staon Sengs
Edit the parameters of the door staon (including but not limited to, community No.,
building No., No., room No. and device mode).oor
Steps
1. Congure the parameters according to the actual needs.
Note
Outer door staon can only edit the Community No., Project No. and No.
The No. of the main door is 0.staon
The No. of sub door should be larger than 0 and ranges from 1 to 8.staons
Each unit should add 1 main door staon. staons Up to 8 sub door can be
added to the main door staon.
2. Normally Open ModeOponal: Enable the according to your needs.
The door remains open.
3. Oponal: Select the language.
4. Aer conguraon, press to save and exit.*
Recognion with Mask
Steps
1. Face with Mask Enable Detecon.
2. Passing Level of Face Mask Select the Recognion.
3. Fce with Mask & Face 1:N Matching ThresholdEdit the and Fce with Mask & Face
1:N Matching Threshold (ECO Mode).
5.1.3 Add Residents
User Management
You can add, edit and delete the informaons of the users.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
15
Steps
1. * #Hold and at the same to enter the page.me authencaon
2. Authencate via administrator.
-Authencate face/card/ngerprint to login.
-Press to enter the password to login.#
3. Switch to User Management according to the ps on the page.
4. #Press to enter the sengs page.
Add Users
You can add cards, permissions and room No. for the users.
Steps
1. +Add #Select , and press to enter the adding page.
2. Edit the room No.
3. Add cards.
1) Switch to the card and press # or present cards on the card reading area to add.
2) Enter the card No. manually or present the card on the card reading area to get
the card No. automacally.
3) Press to add.#
4. Switch to the permisson and press # to set.
5. *Press to save and exit.
5.1.4 About
You can view the device model, system version and QR Code of the device.
Steps
1. * #Hold and at the same to enter the page.me authencaon
2. Authencate via administrator.
-Authencate face/card/ngerprint to login.
-Press to enter the password to login.#
3. Swritch to About according to the ps on the page.
4. #Press to enter the page.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
16
5.2 Video Intercom Operaon
5.2.1 Call Resident
The door can work as main/sub door staon staon, staon, and outer door which
correspond to dierent calling resident modes respecvely.
Call Resident from Main/Sub Door Staon
Press any digit on the main/sub door buon staon page to enter the calling
page.
Enter the room No. and press call buon.
Call Resident from Outer Door Staon
Press call on the outer door page to enter the calling page .buon staon
Enter Community No. + Building No. + # + Unit No. + # + Room No. and【 】
press call to call resident.buon
Note
When Unit No. is one, it can be When Unit No. is omied. omied,
Community No. must be at the same omied me.
5.2.2 Call Center
Press any digit on the main/sub door buon staon page to enter the calling page.
Press center to call., and press to cancel during calling management center.buon *
5.3 Unlock Door
5.3.1 Unlock by Password
Video Intercom Face Door Recognion Staon with 4.3-inch Screen User Manual
17
Unlock by Password
Tap to enter the calling page.Call/Open
Enter # + Room No. + Password + # , and tap unlock buon.
Unlock by Public Password
Note
Make sure you have created the public password via iVMS-4200 Client
Soware remotely.
Tap to enter the calling page.Call/Open
Enter # + Public Password + # , and tap unlock buon.
5.3.2 Unlock by CardPresenng
Note
Make sure you have issued the card to the device. Refers to forUser Management
details.
Present the card on the card reading area to unlock.
5.3.3 Unlock by Fingerprint
Note
Make sure you have added the ngerprint to the device.
Fingerprint may vary with funcon dierent modules. Please refer to the actual
devices.
Put your on the nger nger recognion module to unlock.
5.3.4 Unlock by Face
Note
Make sure you have added your face picture to the device. Refers to the User
Management for details.
Video Intercom Face Door Recognion Staon with 4.3-inch Screen User Manual
18
Face forward at the camera to unlock.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
19
6 Remote Conguraon via Web
6.1 Live View
In the browser address bar, enter the IP address of the device, and press the Enter
key to enter the login page.
Enter the user name and password and click to enter the Live View page. OrLogin
you can click Live View to enter the page.
Figure 6-1 Live View
You can start/stop live view, capture, record, audio on/o, two-way audio, etc.
The stream type can be set as main stream or sub stream.
For IE (Internet Explorer) or Google users, the device support two-way audio
communicaon.
Note
Live View may vary with funcon dierent models. Please refer to the actual
product.
6.2 User Management
You can add, delete or search the informaon of the user.
Click to enter the User sengs page.
Click and enter the username, No. and room No. to add.Add oor
Click to modify the Edit informaons of the user.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
20
Check the box of the user and click Delete to delete the selected user.
Enter the keyword and click . The Search informaon will display in the list.
6.3 Device Management
You can manage the linked device on the page.
Click to enter the page.Device Management sengs
Add Device
Click to add the indoor Add staon staon. or sub door Enter the
parameters and click to add.OK
Click . Enter the Import informaon of the device in the template to
import devices in batch.
Note
Select the device and click to remove the device from the list.Delete
Export
Click to export the to the PC.Export informaon
Upgrade
Upgrade Automacally
Click to pop-up the dialog.Timing Upgrade sengs
Enable upgrading device automacally. Edit the start and end me me
and click to save the OK sengs.
The upgrading will start at the set me automacally.
Upgrade Manually
Click Upload Upgrading Package to import the upgrading package.
Click to start upgrading.Upgrade Now
View Version
Put the mouse on the Upgrading buon to view the upgrading version
and me.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
21
Maintenance
Click Maintenance → Upgrade & Maintenance to enter the page.sengs
Figure 6-2 Maintenance
Reboot: Click Reboot to reboot the device.
Restore
Click Restore to reset all the parameters, except the IP parameters
and user informaon, to the default sengs.
Default
Click to restore all parameters to default Default sengs.
Export parameters:
1. Select Device Parameters Export, and click to pop up the dialog box.
2. Set and the password.conrm encrypon
3. Click to export parameters.OK
Import Cong. File:
1. Click browse icon to select the conguraon le.
2. Click and enter the password to import.Import encrypon
Upgrade: Click browse icon to select the upgrade le.
Note
The upgrading process will last 1 to 10 minutes, do not power duringo
the upgrading. The device reboots automacally aer upgrading.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
23
Authencaon
Click to enter the page. On the page,Security → Authencaon sengs
you can select RTSP Authencaonaccording to your actual needs.
Click to enable the Save sengs.
Security Service
Click to enter the page. On the page,Security → Security Service sengs
you can enable SSH according to your actual needs.
Click to enable the Save sengs.
User Management
Click to enter the page.User Management sengs
Administrator can edit the permission for the users.
Note
We highly recommend you to create a strong password of your own
choosing (using a minimum of 8 characters, including at least three kinds of
following categories: upper case leers, leers, lower case numbers, and
special characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high
security system, changing the password monthly or weekly can beer
protect your product.
Online Users
Click User Management → Online Users to enter the page.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
24
Figure 6-3 Online Users
Click Refresh to get the present informaon.
Arming/Disarming Informaon
Click to view theUser Management → Arming/Disarming Informaon
informaon. Click to get the present Refresh informaon.
6.4.2 Network Sengs
TCP/IP Sengs
TCP/IP must be properly sengs congured before you operate the device over
network. The device supports IPv4.
Steps
1. Network → Basic Click Sengs → TCP/IP to enter the page.sengs
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
25
Figure 6-4 TCP/IP Sengs
2. Congure the network parameters.
-Check , the device will get the parameters DHCP automacally.
-Set the , and IPv4 Address IPv4 Subnet Mask IPv4 Default Gateway manually.
3. Congure the corresponding DNS server parameters.
4. SaveClick to enable the sengs.
Port Sengs
Steps
1. Network → Basic → PortClick Sengs to enter the page.sengs
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
26
Figure 6-5 Port Sengs
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which is
not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any port No. which is
not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be changed to any port No.
ranges from 2000 to 65535.
3. SaveClick to enable the sengs.
SNMP Sengs
Before You Start
Before the SNMP, please download the SNMP and manage toseng soware
receive the camera informaon via SNMP port. By the Trap Address, theseng
camera can send the alarm event and excepon messages to the security center.
Steps
1. Network → Advanced → SNMPClick to enter the page.sengs
2. Check the checkbox of Enable SNMPv1, Enable SNMP v2c to enable the feature
correspondingly.
1) Edit Read SNMP Community Write SNMP Community and .
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
27
2) Enter the Trap Address Trap Port Trap Community, and .
Note
To lower the risk of leakage, you are suggested to enable SNMP v3informaon
instead of SNMP v1 or v2.
3. Check the check box of Enable SNMPv3 to set the SNMPv3 parameters.
4. SaveClick to enable the sengs.
FTP Sengs
Steps
1. Network → Advanced → FTPClick to enter the sengs page.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
28
Figure 6-6 FTP Sengs
2. Enable FTPCheck .
3. Server TypeSelect .
4. Server IP Address PortInput the and .
5. Congure Sengs, the FTP and the user name and password are required for the
server login.
6. Directory Structure Parent Directory Child DirectorySet the , and .
7. Set the picture naming rules.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
29
8. SaveClick to enable the sengs.
Plaorm Access
Plaorm access provides you an to manage the devices via opon plaorm.
Steps
1. Network → Advanced AccessClick Sengs Plaorm to enter the sengs
page.
2. EnableCheck the checkbox of to enable the funcon.
3. Access ModeSelect the Plaorm .
Note
Hik-Connect is an for mobile devices. With the App, you can view liveapplicaon
image of the device, receive alarm and so on.nocaon
4. Create a for the device.Stream Encrypon/Encrypon
Note
6 to 12 (a to z, A to Z) or numbers (0 to 9), case You areleers sensive.
recommended to use a of no less than 8 or numbers.combinaon leers
5. SaveClick to enable the sengs.
6.4.3 Video & Audio Sengs
Video Parameters
Steps
1. Video/Audio → VideoClick to enter the page.sengs
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
30
Frame Rate
Set the frame rate. The frame rate is to describe the frequency at which the
video stream is updated and it is measured by frames per second (fps). A
higher frame rate is advantageous when there is movement in the video
stream, as it maintains image quality throughout.
Max. Bitrate
Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to
the higher video quality, but the beer bandwidth is required.
Video Encoding
The device supports H.264.
I Frame Interval
Set I Frame Interval from 1 to 400.
4. SaveClick to save the sengs.
Audio Parameters
Steps
1. Video/Audio → AudioClick to enter the page.sengs
Figure 6-8 Audio Sengs
2. Congure the stream type and the audio encoding type.
Stream Type
Select the stream type to main stream or sub stream.
Audio Encoding
The device support G.711ulaw and G.711 alaw.
3. Input Volume Output VolumeAdjust the and .
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
32
Note
Available range of volume: 0 to 10.
4. SaveClick to save the sengs.
6.4.4 Display Sengs
Congure the image adjustment, backlight and other parameters in displaysengs
sengs.
Steps
1. Image → Display Click Sengs to enter the display page.sengs
Figure 6-9 Display Sengs
2. FormatSelect the .
3. Set the display parameters.
WDR
Wide Dynamic Range can be used when there is a high contrast of the bright
area and the dark area of the scene.
Brightness
Brightness describes bright of the image, which ranges from 1 to 100.
Contrast
Contrast describes the contrast of the image, which ranges from 1 to 100.
Saturaon
Saturaon describes the colorfulness of the image color, which ranges from 1
to 100.
Sharpness
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
33
Sharpness describes the edge contrast of the image, which ranges from 1 to
100.
4. Day/Night ModeSet the .
Figure 6-10 Day/Night Mode
-Set or Day Mode Night Mode manually.
-Set the mode as and edit the according to your needs.Auto sensivity
-Set the mode as Scheduled-Switch. Set the start and end me me.
Note
Dayme is from start to The rest of the iscongured me congured me. me
set as night by default.
5. SaveClick to enable the sengs.
6.4.5 Event Sengs
Moon Detecon
Moon detecon detects the moving objects in the security area, and acongured
series of acons can be taken when the alarm is triggered.
Steps
1. Event → Click Moon to enter the sengs page.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
34
Figure 6-11 Moon Detecon
2. Enable Slide Moon Detecon to enable the funcon.
3. Draw AreaClick . Click and drag the mouse on the live video to draw a moon
detecon area. Click Save to save the sengs.
Clear Area Click to clear all of the areas.X
Adjust Sensivity Move the slider to set the of the sensivity detecon.
4. Arming ScheduleClick to edit the arming schedule.
5. SaveClick on the bar and drag the mouse to select the period. Click me me to
save the sengs.
Delete Schedule Click to delete the current arming schedule.Delete
6. Linkage MethodClick to enable the linkages.
Nofy Security Center
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
35
Send an excepon or alarm signal to the remote management soware when
an event occurs.
7. SaveClick to enable the sengs.
Event Linkage
Steps
1. Event → Basic Event → Event LinkageClick to enter the page.sengs
Figure 6-12 Event Linkage
2. Major Type Device Event Door EventSelect the as or .
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
36
3. Normal LinkageSelect the type of the for the event.
4. SaveClick to enable the sengs.
6.4.6 Intercom Sengs
Device ID Conguraon
Steps
1. Device No.Click to enter the page.
Figure 6-13 Device ID Sengs
2. Select the device type from the drop-down list, and set the corresponding
informaon.
3. SaveClick to enable the device number conguraon.
Note
For main door staon (D series or V series), the serial No. is 0.
For sub door staon (D series or V series), the serial No. cannot be 0. Serial No.
ranges from 1 to 99.
For each villa or building, at least one main door staon (D series or V series)
should be and one sub door congured, staons (D series or V series) can be
customized.
For one main door staon (D series or V series), up to 8 sub door canstaons
be congured.
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
37
Linked Network Sengs
Steps
1. Intercom → Session Go to Sengs to enter the page.sengs
2. Register NumberSet and Registraon Password.
3. Main IP VideoIntercom Server IPSet Staon and .
4. Enable Protocol 1.0.
5. SaveClick to enable the sengs.
Time Parameters
Go to Intercom → Time Parameters to enter the page.
Congure Max. Call Duraon, Max. Message Max. Ring Duraon, Duraon, and
click .Save
Note
Max. call duraon staon between the module indoor and client ranges from 90 s
to 120 s. The call will end automacally duraon when the actual calling is longer
than the one.congured
Max. message duraon ranges from 30 s to 60 s. The message will end
automacally duraon congured when the actual message is longer than the
one.
Max. ring duraon refers to the maximum duraon staon of the module indoor
when it is called without being accepted. Max. ring ranges from 65 s toduraon
255 s.
Ring-Back Tone Sengs
Click Intercom → Ringbacktone Sengs to enter the page.sengs
Click to select the ring tone from PC.Add
Note
Available Audio Format: WAV AAC, Size: Less than 600 KB, Sample Rate: 8000Hz,
Mono.
6.4.7 Access Control Sengs
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
38
Permission Password
Steps
1. Access Control → Permission PasswordClick to enter the page.sengs
Figure 6-14 Permission Password
2. Select the password type.
3. Change the password.
4. Set the number of doorphone.
5. SaveClick to enable the sengs.
Door Parameters
Steps
1. Access Control → Door ParametersClick to enter the page.sengs
Video Intercom Face Recognion Staon Door with 4.3-inch Screen User Manual
39

Produktspecifikationer

Varumärke: Hikvision
Kategori: Intercomsystem
Modell: DS-KD9203-TE6

Behöver du hjälp?

Om du behöver hjälp med Hikvision DS-KD9203-TE6 ställ en fråga nedan och andra användare kommer att svara dig




Intercomsystem Hikvision Manualer

Intercomsystem Manualer

Nyaste Intercomsystem Manualer