Hikvision DS-PM-RSO8-H Bruksanvisning

Läs gratis den bruksanvisning för Hikvision DS-PM-RSO8-H (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 6 recensioner. Har du en fråga om Hikvision DS-PM-RSO8-H eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Product Overview

The RS485 Output Expander provides 4 / 8 relays

with Form C (normally open and normally closed)

contacts that are connected to the Security Control

Panel via the control's RS-485 bus wiring. The

device address of the relay module can be set by

DIP switches for RS-485 communicaons.

Physical Interfaces

Order Models

DS--RS04-H PM

RS485 4 Outputs

Expander

DS--RS08-H PM

RS485 8 Outputs

Expander

Specicaons

Electrical

Power Consumpon

2W@12VDC

Environmental

Temperature

(Operang)

-to +55 10℃ ℃

Relave Humidity

10%90% to

Relay Output

Contact Rang

220VAC@ 10A

Insulaon

resistance

1000M @500VΩDC

Cauon

Power o the control panel and set the DIP switch the expander before installing. esin

Do not set several expanders as a same address, or it may cause communicaon faults.

The available device address ranges from 0 to 31.

Power on the expan before powering on the control panel. der

The designated earth ground terminal must be terminated in a good earth ground.

RS485 4 / 8 Outputs Expander

DS--R-H PMS04

DS--R-HPM S08

Produktspecifikationer