Hitachi CP-EW300N Bruksanvisning
Läs gratis den bruksanvisning för Hitachi CP-EW300N (28 sidor) i kategorin Beamer. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4.5 recensioner. Har du en fråga om Hitachi CP-EW300N eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/28
Optional Lens User’s Manual
Important Safety Instructions
(Always follow these instructions)
Please read this section on important safety instructions before
replacing the projector lens. To prevent accidents during lens
replacement and ensure product safety after replacing the lens,
be sure to follow the safety instructions described herein.
● These symbols indicate actions that can result in injury or
damage if these operations are not followed correctly.
Warning
This symbol indicates that there is a
possibility of serious injury or even death
if the operation is not followed correctly
Caution
This symbol indicates that there is a
possibility of physical injury or damage to
equipment if the operation is not followed
correctly.
● These symbols indicate the types of precautions that must
followed.
This symbol indicates
that caution must be
taken.
This symbol warns of
possible high heat.
This symbol warns
of possible electrical
shock.
This symbol indicates
an action that must
not be performed.
Warning
■ For safety, do work in accordance with the
Exchange Manual to replace the lens.
■ Please read this manual and manuals for the
LCD projector to be used thoroughly to ensure
correct usage through understanding.
Incorrect usage could result in fire, an injury or damage.
■
Do not subject the device any shock or impact.
Any shock or impact could result in an injury or
damage. The lens projects out of the device. Take
care not to strike it.
Notice
■ Take care of the lens.
•
When transporting the lens, protect the lens by attaching the lens cap.
• Do not touch the lens to prevent fog or dirt on the lens that
could cause deterioration of display quality.
• Do not touch the lens directly. This can dirty the lens and cause
deterioration in image quality.
• The lens is a precision optical device. Carefully handle the lens
without subjecting it to shocks or vibrations.
• When resting the lens on a surface, place the lens face down
on a soft cloth.
■ Cleaning
• Use commercially available lens tissue to clean the lens (used
to clean cameras, eyeglasses, etc.).
•
Excepting for lens, use a soft cloth to clean. When excessively soiled
dilute a neutral detergent in water, wet and wring out the soft cloth.
• Do not use detergents or chemicals other than those noted
above (e.g. benzene or thinners).
Informa tion for users
applicable in European Union countries
This symbol on the product or on its packaging means
that your electrical and electronic equipment should be
disposed at the end of life separately from your household
wastes. There are separate collection systems for recycling
in EU. For more information, please contact the local
authority or the dealer where you purchased the product.
Operations
• Project an image as described in the LCD Projector user's
manual, and adjust the size and focus of the projected image.
• See the Projection Distance table in this user's manual for
information on optional lens projection distances.
Note
• The distance of projection may not allow focusing on the
peripheral area of the screen. Adjust the focus to keep the center
and the peripheral area of the screen balanced.
• These specifications are subject to change without notice.
• The zoom lens may cause some distortion of the image on the
screen depending on the zoom position.
• Distortion may appear on screen if the keystone correction
(trapezoidal distortion correction) is overly adjusted.
• Keystone correction (trapezoidal distortion correction) may be
limited with some lenses.
Important Operation Instructions
Warning
■ Do not place the lens in a location subject to
direct sunlight or other strong lighting or near
heat-radiating equipment.
This can cause a fire due to the properties of the
lens. It can also cause injury or damage to the lens.
■ Be sure to unplug the LCD projector before
replacing the lens.
The inside of the LCD projector has areas of high
voltage which can cause electrical shock.
■ Before replacing the lens, be sure to turn off
and unplug the LCD projector, and allow at least
45 minutes for the projector to fully cool down.
■ When attaching, take care so that dust does
not enter inside or stick to the connector.
Continued use with dust inside may result in fire or
electric shock.
■ If the projector is mounted on a ceiling, ask the
dealer to replace the lens.
This can cause injury.
Caution
■ When replacing the lens, do not touch the LCD
panels or polarizing plates of the LCD projector
or subject them to shocks.
This can cause damage to the equipment. It can
also cause a misalignment of the optical adjustment
and, therefore, require readjustments.
■ When replacing the lens, be careful not to
damage the connectors or wires inside the LCD
projector.
This can cause damage to the equipment. Be
careful not to pull on the connectors or wires or get
them caught in the circuit board or case.
English
QR82295
Produktspecifikationer
| Varumärke: | Hitachi |
| Kategori: | Beamer |
| Modell: | CP-EW300N |
Behöver du hjälp?
Om du behöver hjälp med Hitachi CP-EW300N ställ en fråga nedan och andra användare kommer att svara dig
Beamer Hitachi Manualer
8 Januari 2025
14 Oktober 2024
22 September 2024
20 September 2024
16 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
Beamer Manualer
- Acco
- Dell
- Easymaxx
- Epson
- Yaber
- Speaka
- D-Link
- VAVA
- Krüger And Matz
- ZTE
- Planar
- OK
- Adj
- Mitsubishi
- Boxlight
Nyaste Beamer Manualer
9 April 2025
9 April 2025
2 April 2025
5 Mars 2025
5 Mars 2025
3 Mars 2025
1 Mars 2025
26 Februari 2025
20 Februari 2025
20 Februari 2025