HiTi CS-200e Bruksanvisning

HiTi Skrivare CS-200e

Läs nedan 📖 manual på svenska för HiTi CS-200e (80 sidor) i kategorin Skrivare. Denna guide var användbar för 5 personer och betygsatt med 5.0 stjärnor i genomsnitt av 3 användare

Sida 1/80
HiTi
user manual
͐ᮢ ⦦
͐
͐
͐
͐
͐ᮢ ⦦
͐
͐
͐
͐
www.hiti.com
HiTi Digital, Inc.
HiTi CS-200e user manual
CONTENTS
PREFACE
Announcements
Chapter 1. Getting ready
1.1 Checking box contents
1.2 Appearance of the printer and key functions
1.3 Installation
Collecting
Adjusting
Chapter 2. Start Printing
2.1 Printer driver installation
2.2 Print settings
2.3 Print software application
Chapter 3. Printer maintenance
3.1 General warranty information notice announcement
3.2 Routine / Regular printer cleaning
Chapter 4. Help diagnosis
4.1 Warnings / Error messages and diagnosis
4.2 Printing a demo chart
4.3 Identify installed driver software version
4.4 Troubleshooting
4.5 Technical support
Appendix A: Technical Specifications
01
03
03
04
06
09
09
10
10
11
12
13
13
14
18
18
20
20
21
23
24
English
HiTi CS-200e user manual
Copyright
HiTi CS Card Printer © 2011. All rights reserved.
Trademarks acknowledgement
HiTi CS Card Printer is a trademark of HiTi Digital Inc. product. All other trademarks belong to their respective holders.
Warranty
Refer to the warranty card supplied with your card printer package box for warranty terms, conditions and limitations.
Copyright notice
01
English
Users must comply with the copyright regulations applicable in their own country. This manual must not be reproduced,
translated, photocopied, transmitted or any kind to be duplicated in whole or in part, for any reasons and by any
electronic or mechanical means whatsoever without the express a written consent of the HiTi Digital Inc.
All the information contained in this document is subject to changed without prior notice.
HiTi Digital Inc. cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising
accidentally or as a result of dissemination or use of this manual.
HiTi CS-200e user manual
1.2 Appearance of the printer and key functions
Top cover opening button
LCM control panel
Input card cover
Input card feeder (100cards)
Spec. label
Manual releasing card
jam screw socket
(slotted screwdriver)
Smart IC encoding expansion socket
Manual card feed
input location
Ethernet expansion socket
Power socket
USB cable connection socket
ON / OFF
hard power switch button
04
English
HiTi CS-200e user manual
2.2 Print settings
11
English
Before start using your HiTi card printer, it is very important to double check and/or change the default print driver
settings. Those settings includes in the following list:
Those print settings can be accessed from the following instructions:
The most frequent use in print settings are Device Option, Color and Tools.
Ribbon types Card types Card thickness Others
From the Start button (located bottom-left on the Windows task bar), select Printers and Faxes
Select your HiTi card printer and then follow by a double click
From the Printer menu, select Properties
A pop up configuration screen for HiTi card printer appears
The main menu tabs include Device Option, Printing Area, Color, Tools, Magnetic Encoding, Import/Export & About
Please pay attention to the settings under printer driver properties and contact your local HiTi distributor or
dealer for any advice and assistance needed before attempting any changes.
Ribbon type
Card type
Card thickness
Front & back image
Page order
Using Resin K
Device Option Tab Color Tab
Color preference setting
Special function
Color adjustment
Printer position adjuster
Cleaning tool option
Maintenance info
Advance option
Heating energy option
Tools Tab
HiTi CS-200e user manual
15
English
3.2.1 Using cleaning card
Each pack/box of HiTi original consumables should contain one single piece of cleaning card.
a. Remove any remaining cards from input card feeder.
b. Insert pilled protection film from both sides’ cleaning card into the feeder.
c. Press “OK” button on the LCM control panel to “Device Information”.
d. Press “Right” button to “Cleaning Mode”.
e. Follow the instruction messages displayed on the LCM control panel to complete the cleaning process.
a b c
d
Device Information
Cleaning Mode

Produktspecifikationer

Varumärke: HiTi
Kategori: Skrivare
Modell: CS-200e

Behöver du hjälp?

Om du behöver hjälp med HiTi CS-200e ställ en fråga nedan och andra användare kommer att svara dig