Home Easy HE-307 Bruksanvisning
Home Easy
Inte kategoriserad
HE-307
Läs gratis den bruksanvisning för Home Easy HE-307 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 10 recensioner. Har du en fråga om Home Easy HE-307 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
HomeEasy Remote
Control Light Switch
V1.0
The HE-307and HE-308 Remote Control
light switches are expansion units for
the HomeEasy range of products and
designed to work with all the
HomeEasy receiver sockets and
modules.
Additional HomeEasy receiver products
are required for the HE-307/HE-308 to
work.
HOME
easy
1Gang:
S1: On/Dim
S1: On/Dim
S1: Off
S1: Off
2Gang:
Product Operation:
Pairing/Deleting with Remote Control:
Up to Six remote controls can be paired with each Receiver Socket or Module. To
pair the switch and a socket together, press "Learn" button. The LED will start to
flash, now press the selected "ON" button on the remote control, the LED will stop
flashing. The units are now paired together, you can test this by pressing the
selected "On/Off" button.
Always refer to the original instruction when using with additional products
On/Dim
Off
Deleting Remote Control:
To delete a remote control that has been paired with a HomeEasy Receiver
socket or module, simply press the "Learn" button. The LED will start to blink;
press the "Off" button on the remote control, the LED will blink twice to
confirm that the remote control has been removed from the receiver sockets
memory.
Remote Socket reset:
To delete all the remote control units from the memory of the Receiver Socket
or module, hold the "Learn" button for more than 6 seconds, the LED will start
to blink continuously. Press the learn button again, the LED will blink twice to
confirm the deletion of all remote controls form the receiver memory.
Changing Battery:
Replace the battery with a new CR2032
battery (Byron SX100), making sure the
polarity is correct, then replace the front
cover.
Dimming: (Compatiable Receivers Only)
To dim a compatible receiver socket or module, switch the receiver on and
then press "On" again. The unit will now start to dim to select the required
level press "On" again.
Using a small flat screwdriver remove the front cover by placing the
screw driver in the location notch on the bottom part of the rocker cover
and unclip the cover.
Produktspecifikationer
| Varumärke: | Home Easy |
| Kategori: | Inte kategoriserad |
| Modell: | HE-307 |
Behöver du hjälp?
Om du behöver hjälp med Home Easy HE-307 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Home Easy Manualer
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
16 Augusti 2024
14 Augusti 2024
12 Augusti 2024
12 Augusti 2024
Inte kategoriserad Manualer
- Energy Sistem
- SmartGyro
- Jotul
- Winix
- Exo-Terra
- Abac
- Lescha
- Datacard
- JoeCo
- Subaru
- Microair
- Shoprider
- Hotpoint-Ariston
- Brilliant
- Akrobat
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025