Honeywell 3511 Bruksanvisning
Läs gratis den bruksanvisning för Honeywell 3511 (8 sidor) i kategorin Valv. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5.5 recensioner. Har du en fråga om Honeywell 3511 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
Model 3511
EXECUTIVE / LONG GUN SAFE
Read this manual carefully and never store it inside the safe!
1
Model 3511
EXECUTIVE / LONG GUN SAFE
PACKAGE CONTENTS
1 – Executive / Long Gun Safe
1 – Operation Manual
2 – Override Access Keys
2 – - Storage Box Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
DIGITAL LOCK OVERVIEW
A - Lock Knob
B - Override Key Cover
C - Green LED
D - Red LED
E - Yellow LED
F - Entry Lever Handle
G - Reset Button
H - Battery Compartment
2
SETUP
STEP1. OPEN SAFE WITH OVERRIDE KEY
1. Remove override key cover with small screwdriver.
2. Insert override key and turn left to unlock safe.
3. Turn knob to right (clockwise) and unlock safe
4. Turn lever to right (counter clockwise) to disengage the bolts
and open door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on inside door. Insert 4
“AA” batteries (included). Ensure the batteries are installed in
the correct direction, with regard to polarity (+ and -).
2. Replace the battery cover.
3. Do not close door before testing digital lock.
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts in lock
position.
2. Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: “1”- – -“B”. “5” “9”
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position .
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press reset button (C) inside door.
2. Yellow light is on, enter new pass code in 30 seconds.
3. Enter new code (3 to 8 digits) followed by “A” or “B”.
4. Safe will beep and yellow light will turn off. Lock bolts should
recede into the unlocked position.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. unlock and To open safe, enter the pass code
followed by “A” or “B”.
2. Turn knob to right (clockwise) and unlock safe.
3. Turn lever to right (counter clockwise) to
disengage the bolts and open .
TO CLOSE THE SAFE
1 . Close the door and hold it in the closed position.
2 . Turn lever to left (clockwise) to engage the bolts
and secure door.
3. Turn knob to the left (counter clockwise) and lock
safe.
Produktspecifikationer
| Varumärke: | Honeywell |
| Kategori: | Valv |
| Modell: | 3511 |
Behöver du hjälp?
Om du behöver hjälp med Honeywell 3511 ställ en fråga nedan och andra användare kommer att svara dig
Valv Honeywell Manualer
30 December 2025
22 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
19 September 2024
17 September 2024
17 September 2024
17 September 2024
Valv Manualer
- Olymp
- Royal Safe
- Nedis
- Yale
- Handson
- Varo
- Hard Head
- Toolland
- Kidde
- SereneLife
- Abus
- Thule
- Avanti
- First Alert
- Sygonix
Nyaste Valv Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
27 Mars 2025
1 Februari 2025
9 Januari 2025
7 Januari 2025
1 Januari 2025