Honeywell HBD92S Bruksanvisning
Sidor 2 Engels övervakningskamera
Läs bruksanvisningen för Honeywell HBD92S gratis online eller ladda ner PDF:en. 18 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
Document 800-09587 – Rev A – 11/11
HBD9 Series Camera Quick Install Guide
800-09587 Rev A 11/11
Camera Overview
Installing the Camera
HBD9 Series cameras (HBD92S/HBD92SX/HBD95S/HBD95SX) can be installed on a
wall or ceiling indoors or outdoors.
Mounting the Camera
1.Find a suitable location for mounting the camera. The mounting surface must be
flat and capable of supporting the combined weight of the camera, sunshield,
bracket, and mounting ring (approximately 3.18 lb. [1.44 kg]).
2.Attach the mounting ring to the mounting surface using the four supplied 1-inch
(25.4 mm) self-drilling screws.
3.Attach the camera and bracket to the mounting ring using the four supplied
3/8-inch (9.52 mm) socket cap screws. Tighten the screws using the supplied hex
key.
Note For an outdoor wall mount installation, ensure that the notch in the base of the bracket is
facing down.
Positioning the Camera
You can position the camera to capture the desired field of view by adjusting the multi-
directional bracket. To change the camera position, loosen the bracket screws with
the supplied hex key, reposition the camera, and then tighten the screws.
Connecting the Camera
1.Connect the camera’s BNC video output to the video input on your monitor or
digital video recorder.
2.Connect the camera’s 12 V DC power output to a power supply appropriate for
your installation (24 V AC or 12 V DC).
Figure 1Video and Power Connections
Note
When the main video is connected to a terminated monitor or recording device, if the
second video out is also connected to a terminated monitor, the video will become darker.
For correct video level, ensure that only
one
video output is terminated with a 75 ohm load.
Configuring the Camera
Setting the Focus and Zoom
The focus and zoom controls are located on the underside of the camera.
Figure 2Focus and Zoom Controls*
To set the focus:
1.Loosen the focus set screw using the supplied hex key.
2.Turn the focus adjustment screw clockwise for near focus (N) or
counterclockwise for far focus (
∞).
3.Tighten the focus set screw to lock the focus setting.
To set the zoom:
1.Loosen the zoom set screw using the supplied hex key.
2.Turn the zoom adjustment screw clockwise to decrease zoom (W) or
counterclockwise to increase zoom (T).
3.Tighten the zoom set screw to lock the zoom setting.
Setting the LED Brightness
You can adjust the LED brightness level in night (B/W) mode. The LED brightness
control is located on the underside of the camera, next to the focus and zoom
controls. Unscrew the cap to access the control board.
Figure 3Camera Control Board
To set the LED brightness:
Turn the LED LEVEL adjustment screw either clockwise to increase the LED
brightness or counterclockwise to decrease the LED brightness.
Programming the Camera
You can program the camera using the onscreen display (OSD) menus. The menu
controls are located on the camera control board (Figure 3). Move the OSD controller
joystick up, down, left, or right to navigate through the menu options. Press the
joystick to execute (set) a selection or to enter a submenu (
).
Figure 4Setup Menu Structure
Sunshield
Mounting
Ring
Bracket
Notch
Video (BNC) - Yellow
Power (12 V DC) - Red
N
T W
Zoom Adjustment Screw
Focus Adjustment Screw
SETUP
LED LEVEL
VIDEO
TEST
OSD Controller
LED Adjustment Screw
2nd Video Out
<<SETUP MENU>>
LENS DC
EXPOSURE
WHITE BALATW
SSDR OFF
BACKLIGHT OFF
DNR3 ON
DAY/NIGHT EXTERN
SPECIAL
EXIT SAVE
1
2
3
4
5
6
7
8
9
LENS DC
EXPOSURE
WHITE BAL
SSDR
BACKLIGHT
SPECIAL
DAY/NIGHT
DNR3
BRIGHTNESS, SHUTTER, AGC,
SENS-UP, RETURN
ATW, OUTDOOR, INDOOR,
MANUAL, AWCSET
OFF, ON
OFF, BLC, HLC
ON, OFF
EXTERN, COLOR, B/W, AUTO
See Special Menu Structure.
Main Setup MenuMenu OptionsSubmenu
* The HBD92S(2.8–12 mm) controls are shown here.
The controls appear in reverse order on the HBD95S (5–50 mm).
Produktspecifikationer
| Varumärke: | Honeywell |
| Kategori: | övervakningskamera |
| Modell: | HBD92S |
Behöver du hjälp?
Om du behöver hjälp med Honeywell HBD92S ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Honeywell Manualer
Honeywell Acuix HDXJNDASW Bruksanvisning Honeywell HC60WB4R2L Bruksanvisning Honeywell Equip HD3HDIH Bruksanvisning Honeywell HCC474M Bruksanvisning Honeywell Acuix HDXANDACW Bruksanvisning Honeywell HDZ30HD Bruksanvisning Honeywell HED1PR3 Bruksanvisning Honeywell Performance HD40H Bruksanvisning
Alla Honeywell övervakningskamera manualer
Populära i övervakningskamera
Honeywell Equip HCD5WIH Bruksanvisning Honeywell HC35W45R3 Bruksanvisning Honeywell Performance HD31H Bruksanvisning
övervakningskamera Manualer
Nyaste övervakningskamera Manualer
Hanwha XNP-6550RH Bruksanvisning Hanwha Vision PNM-C19183RVTP Bruksanvisning Hanwha SBP-301HM2 Bruksanvisning Hanwha Vision QNV-C9083R Bruksanvisning Hanwha XNV-8093R Bruksanvisning Hanwha XNO-8083R Bruksanvisning Hanwha Vision QNV-C8083R Bruksanvisning Hanwha Vision QNO-C9083R Bruksanvisning Hanwha Vision ANO-L6082R Bruksanvisning Hanwha Vision XND-8080RV Bruksanvisning