Honeywell HD3US Bruksanvisning

Läs gratis den bruksanvisning för Honeywell HD3US (8 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 3 recensioner. Har du en fråga om Honeywell HD3US eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Document 800-13598 – Rev B – 12/2012

HD3US(X) Ultra WDR Indoor Minidome Camera Quick Installation Guide1

This document describes how to install the HD3US(X) minidome camera.

The camera can be installed to a wall or ceiling using one of the following methods:

•surface mount

•flush (in-ceiling) mount

•pendant mount

Important Safety Instructions

•Read and keep these instructions.

•Please ensure that your installation area can safely support the weight of the camera.

•Do not install the camera in extreme temperature conditions. Only use the camera where

temperatures are within the limits shown in the specifications section of the user guide.

Be especially careful to provide ventilation when operating under high temperatures.

•Do not aim the camera towards an extreme light source to prevent damaging the CCD.

•This camera is rated for indoor operation; do not expose this camera to rain or moisture.

•Do not touch the camera lens, dome or bezel (front glass plate).

•Do not drop the camera or subject it to physical shock.

•Do not use a strong or abrasive detergent when cleaning the camera.

WARNING

Installation and servicing should be performed only by

qualified and experienced technicians to conform to all local codes and to

maintain your warranty.

WARNING

This device is configured for 12 V DC or 24 V AC

operation. Do not connect to a higher voltage. Use only with NRTL-approved

Class 2 power supplies.

Package Contents

Before you begin, check that you have the following items:

Camera Overview

Installing the Camera

Disassembling the Camera

1.Insert a coin into the notch on the camera base

and twist. Set the dome cover aside.

2.Grasp the gimbal base with one hand and the base

skirt with the other and twist the gimbal base

clockwise to remove it from the skirt.

3.Remove the main camera assembly from the base skirt.

Connecting the Cables

Connect the power and video cables.

Mounting the Camera

Surface Mount

1.Pre-drill the mounting holes using the

supplied mounting template as a guide.

2.Attach the base skirt to the mounting surface

using the supplied mounting screws and

anchors.

Note For added support, you can attach the base

skirt to a 2S junction box.

3.Re-attach the main camera assembly to the

base skirt. Twist the gimbal base counterclockwise to lock it in place.

4.Adjust the gimbal position, field of view, and focus as desired

(see Setting Up the Camera).

Flush Mount

1.Cut a hole in the mounting surface using the supplied mounting template as a guide.

2.Insert the main camera assembly through the hole.

•HD3US(X) minidome camera

•2nd video cable

•DC power jack flying lead

•Hardware kit consisting of four (4)

mounting screws and anchors

•Mounting template

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

DO NOT OPEN

RISK OF ELECTRIC SHOCK

Video Cable

Power Cable

24 V AC

Base Skirt

Mounting Screws

Power Board

Camera Control Board

Gimbal

Lens

Dome Cover

Gimbal Base

Main Camera Assembly

1

LockedUnlocked

24 V AC

CCTV Monitor

UnlockedLocked

Produktspecifikationer