Honeywell HSHSSTARTERC1 Bruksanvisning
Honeywell
Inte kategoriserad
HSHSSTARTERC1
Läs gratis den bruksanvisning för Honeywell HSHSSTARTERC1 (36 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4 recensioner. Har du en fråga om Honeywell HSHSSTARTERC1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/36
C1 Wi-Fi Security
Camera
Quick Installation Guide
RCHC4100WF1002
RCHC4100WF1011
Read before installing.
Input/entrada: 5 V 2 A
Download the Honeywell Home app
NOTE: Have your Wi-Fi password available and confirm your
router communicates at 2.4 GHz before installation.
1 Make sure bluetooth is enabled on your mobile device.
2 Search for in the App Honeywell Home
Store or Google Play.
3 Download the Honeywell Home app.
GET IT ON
2
Launch the Honeywell
Home app
1 Launch the Honeywell Home app.
2 Create an account (if necessary),
or sign in to your Honewell Home
account. Tap or the plus ADD DEVICE
sign.
3 Select the C1 Wi-Fi Camera to install,
then follow the instructions in the
Honeywell Home app to name the
camera and its location.
Connect the power cord
1 Remove the camera base and
plug the power cord’s USB
end into the camera.
2 Reinsert the camera base
and plug the camera into a
power outlet.
3 Wait until the LED on the
camera blinks blue (about 1
minute), then tap .NEXT
NOTE: If the LED turns solid red,
it means the connection mode
timed out. Unplug the camera and plug it back in.
Installation
3
Connect
Connect to Wi-Fi
NOTE: Be sure you are on the same Wi-Fi
network you wish to connect your camera
to.
1 Choose your Wi-Fi network from the
list. Tap .NEXT
2 Enter your Wi-Fi password, if
necessary. Tap .DONE
NOTE: The camera will beep during some
steps in this process.
Connect to mobile device
1 Enable bluetooth on your mobile
device.
2 The app will look for the camera.
• For one camera, it will connect
automatically.
• For more than one camera, the app
will prompt you to select one camera
at a time. Each camera has a unique
MAC ID printed on the back. Use
that ID to select the camera you
want to connect.
3 A QR code will display in the app. To
connect your camera to the app, hold the QR code approximately 3-8
inches (7-20 cm) from the camera lens.
4 The camera LED turns purple and the camera beeps.
Produktspecifikationer
| Varumärke: | Honeywell |
| Kategori: | Inte kategoriserad |
| Modell: | HSHSSTARTERC1 |
Behöver du hjälp?
Om du behöver hjälp med Honeywell HSHSSTARTERC1 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Honeywell Manualer
8 September 2024
3 September 2024
30 Augusti 2024
26 Augusti 2024
26 Augusti 2024
25 Augusti 2024
25 Augusti 2024
24 Augusti 2024
24 Augusti 2024
24 Augusti 2024
Inte kategoriserad Manualer
- Heitech
- Palson
- EcoFlow
- BakkerElkhuizen
- G-Technology
- Aquasure
- ANDYCINE
- Agfa
- Ciarra
- ETA
- Lascar Electronics
- TeachLogic
- Ciclo
- Hughes & Kettner
- Waring Commercial
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025