Honeywell RCHW3610WF1001 Bruksanvisning

Honeywell Larmsystem RCHW3610WF1001

Läs gratis den bruksanvisning för Honeywell RCHW3610WF1001 (24 sidor) i kategorin Larmsystem. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5.5 recensioner. Har du en fråga om Honeywell RCHW3610WF1001 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/24
WIFI® WATER LEAK AND
FREEZE DETECTOR
Installation Guide
CHW3610W, CHWES4,
RCHW3610WF,
RCHWES4
Read and save these instructions
Need help?
www.resideo.comWeb:
1-800-468-1502Phone:
2
1 Download the Honeywell Home app
Search for Honeywell Home in the App
Store or Google Play.
After downloading, launch the app,
register (if necessary), go to , and Menu
then go to .Add New Device
2 Install batteries
The detector is powered by 3 AA batteries (included). Open the battery
cover on the detector and install the batteries.
When replacing the cover, press firmly
around the edges to ensure a snug fit.
Note: The cable sensor jack is NOT
for plugging in a power adaptor.
Doing so could damage
the detector.
Cable
sensor jack
GET IT ON
3
3 Connect
Pair and name your detector
1 Water Leak and Under Add New Device, select
Freeze Detector.
Note: Make sure Bluetooth is enabled on your
mobile device and that the detectors LED is
blinking blue. If it is not, see the Reset section.
2 Provide a location for your detector. Press
NEXT.
3 The detector will now pair with the app.
Note: If you have more than
one detector, you will need
to connect each detector
individually.
4 An audible alert will sound
and your detectors LED will
turn solid blue to indicate
your detector is paired. Press
NEXT.
5 Create a custom name for
the detector or select one
from the list. Press NEXT.

Produktspecifikationer

Varumärke: Honeywell
Kategori: Larmsystem
Modell: RCHW3610WF1001

Behöver du hjälp?

Om du behöver hjälp med Honeywell RCHW3610WF1001 ställ en fråga nedan och andra användare kommer att svara dig