Hooker 6075-90268 Bruksanvisning

Hooker Säng 6075-90268

Läs gratis den bruksanvisning för Hooker 6075-90268 (1 sidor) i kategorin Säng. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 8.5 recensioner. Har du en fråga om Hooker 6075-90268 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
STEP 1.Attach the threaded bolts (A) into the two threaded holes that are at the
bottom of the posts of Bolt the Headboard and the Footboard. Slide the
Bed Rail onto the two Bolts (A) on one of the bed posts until the Bolts (A)
are visible through the holes on the inside of the Bed Rail.
STEP 2.Slide a Curved Washer (B) and a Nut (C) onto the Bolts (A) through the
holes in the Bed rail. Tighten all the Nuts (C), using the Open Wrench(D).
STEP 3.Assemble the leg supports to the bed slats.
STEP 4.Mount the assembled support slats onto the side rail with screws (E), then
use a Phillips head screwdriver to tighten screws
STEP 1,2
STEP 3
STEP 4

Produktspecifikationer

Varumärke: Hooker
Kategori: Säng
Modell: 6075-90268

Behöver du hjälp?

Om du behöver hjälp med Hooker 6075-90268 ställ en fråga nedan och andra användare kommer att svara dig