Hooker 638-75006 Bruksanvisning

Läs gratis den bruksanvisning för Hooker 638-75006 (2 sidor) i kategorin Stol. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Hooker 638-75006 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1/2

ASSEMBLY INSTRUCTION

Item#:638-75006 Brynlee Side Chair/2per ctn

** Please make sure you have all parts indicated below prior to assembly.

Assembly Steps:

There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair

during assembly.

1. Place back frame (G) on a clean surface.

2. Tighten seat frame(I) to the backlegs of frame(G) by using bolt(C), lock washer(B) and at

washer(A) at the center location (see diagram 2).Then,tighten seat frame (I)to backlegsofframe

(G) using bolts(E), lock washers (B) and at washers (A) at corner blocks. (See diagram 1)

3. Install front legs (F) onto seat frame(I) using bolts(C), lock washers (B), at washers (A). Tighten

all bolts by hand. (See diagram 2)

4. After all bolts are attached and handtightened, turn the chair upright.

5. Level the chairfollowing the “chairleveling instruction” as below.

6. Make sure the chairis level and thentighten all bolts completely by using the allen wrench (D).

DIAGRAM 1

DIAGRAM 2

Produktspecifikationer