Hoover HLE C8TRGR-80 Bruksanvisning

Hoover Torktumlare HLE C8TRGR-80

Läs nedan 📖 manual på svenska för Hoover HLE C8TRGR-80 (28 sidor) i kategorin Torktumlare. Denna guide var användbar för 11 personer och betygsatt med 4.6 stjärnor i genomsnitt av 6 användare

Ladda ner PDF

Sida 1/28

Thank you for choosing this product.

We are proud to offer the ideal product for

you and the best complete range of home

appliances for your daily routine.

Please read and follow these

instructions carefully and operate the

machine accordingly. This booklet provides

important guidelines for safe use,

installation, maintenance and some useful

advice for best results when using your

machine. Keep all documentation in a safe

place for future reference or for any future

owners.

Please check that the following items are

delivered with the appliance:

• Instruction manual

• Guarantee card

• Energy label

Check that no damage has occurred to the

machine during transit. If it as, call for

service by Customer Service Centre.

Failure to comply with the above can

compromise the safety of the appliance.

You may be charged for a service call if a

problem with your machine is caused by

misuse or by incorrect installation.

To contact the Service, ensure that you

have the unique 16-character code

available, also called the "serial number".

This code is a unique code for your

product, printed on the sticker that can be

found inside the door opening.

WEEE contains both polluting substances (which

can cause negative consequences for the

environment) and basic components (which can

be re-used). It is important to have WEEE

subjected to specific treatments, in order to

remove and dispose properly all pollutants, and

recover and recycle all materials. Individuals can

play an important role in ensuring that WEEE

does not become an environmental issue; it is

essential to follow some basic rules:

l WEEE should not be treated as household

waste;

l WEEE should be handed over to the relevant

collection points managed by the municipality or

by registered companies. In many countries, for

large WEEE, home collection could be present.

In many countries, when you buy a new

appliance, the old one may be returned to the

retailer who has to collect it free of charge on a

one-to-one basis, as long as the equipment is of

equivalent type and has the same functions as

the supplied equipment.

1. GENERAL SAFETY RULES

2. WATER CONTAINERS

3. DOOR, FILTER AND CONDENSER

4. PRACTICAL HINTS

5. - REMOTE CONTROL (WI FI)

6. QUICK USER GUIDE

7. CONTROLS AND PROGRAMMES

TROUBLESHOOTING AND WARRANTY

This appliance is marked according to

the European directive 2012/19/EU

on Waste Electrical and Electronic

Equipment (WEEE).

Contents

Environmental conditions

l Do not continue to use this

machine if it appears to be faulty.

l The tumble dryer is not to be

used if industrial chemicals

have been used for cleaning.

Lint and fluff must not be allowed

to collect on the floor around the

outside of the machine.

l Always remove the plug before

cleaning the appliance.

l The drum inside may be very

hot. Always allow the dryer to

complete the cool down period

before removing the laundry.

l The final part of a tumble dryer

cycle occurs without heat (cool

down cycle) to ensure that the

items are left at a temperature

that ensures that the items will

not be damaged.

l Do not install the product in a

low temperature room or in a

room where there is a risk of

frost occurring. At temperature

around freezing point the

product may not be able to

operate properly: there is a risk

of damage if the water is

allowed to freeze in the

hydraulic circuit (valves, hoses,

pumps). For a better product

performance the ambient room

temperature must be between

5-35°C. Please note that

operating in cold condition

(between +2 and +5°C) might

simply some water condensation

and water drops on floor.

WARNING

Do not use the product if the

fluff filter is not in position or

is damaged; fluff could be

ignited.

WARNING

Where the hot surface

symbol is located the

temperature rise during

operation of the tumble

dryer may be in excess of 60

degrees C.

WARNING

Never stop a tumble dryer

before the end of the drying

cycle unless all items are

quickly removed and spread

out so that the heat is

dissipated.

Installation

l In cases where the dryer is

installed on top of a washing

machine, a suitable stacking kit

must be used according to the

configuration of your appliance:

−

Stacking kit "standard size":

for washing machine with

minimum depth of 44 cm;

− Stacking kit "slim size":

for

washing machine with

minimum depth of 40 cm.

− Universal stacking kit with

sliding: for washing machine

with minimum depth of

47 cm.

The stacking kit shall be

obtainable from service. The

instructions for installation and

any fixing attachments, are

provided with the stacking kit.

l NEVER install the dryer up

near curtains.

l The appliance must not be

installed behind a lockable door,

a sliding door or a door with a

hinge on the opposite side to

that of the tumble dryer, in

such way that a full opening of

the tumble dryer door is restricted.

l For your safety, the appliance

must be correctly installed. If

there is any doubt about installation,

call Service for advice.

l Once the machine is in place

the feet should be adjusted to

ensure that the machine is

level.

l The technical details (supply

voltage and power input) are

indicated on the product rating

plate.

l Make sure that the electrical

system is earthed, complies

with all applicable law and that

the (electricity) socket is

compatible with the plug of the

appliance. Otherwise, seek

qualified professional assistance.

Electrical connections and

safety instructions

WARNING

The appliance must not be

supplied through an external

switching device, such as a

timer, or connected to a circuit

that is regularly switched on

and off by a utility.

l Do not use adapters, multiple

connectors and/or extensions.

l The plug should be accessible

for disconnection after the

appliance has been installed.

l Do not plug the machine in and

switch it on at the mains until

the installation is completed.

l If the supply cord is damaged,

it must be replaced

by the

manufacturer, its service

agent

or similarly qualified persons in

order to avoid a hazard.

l Adequate ventilation must be

provided in the room where the

tumble dryer is located to

prevent gases from appliances

burning other fuels, including

open fires, being drawn into

the room during operation of

the tumble dryer.

l Install the rear of the appliance

close to a wall or vertical surface.

l There should be a gap of at

least 12 mm between the

machine and any obstrubtions.

The inlet and outlet air should

be kept clear of obstruction.

l Make sure carpets or rugs do

not obstruct the base or any of

the ventilation openings.

l Prevent items from falling or

collecting behind the dryer as

these may obstruct the air inlet

and outlet.

l Exhaust air must not be

discharged into a flue which is

used for exhausting fumes

from appliances burning gas or

other fuels.

l Check regularly that the air

flowing around the dryer is not

restricted, avoiding accumulation

of dust and lint.

l Check frequently the fluff filter

after use, and clean, if necessary.

* Air inlet.

**Air outlet.

l Always refer to the laundry

care labels for directions on

suitability for drying.

Ventilation

The Laundry

l Fabric softeners, or similar

products, should be used as

specified by the fabric softener

instructions.

l Do not dry unwashed items in

the tumble dryer.

l Clothes should be spin dried or

thoroughly wrung before they

are put into the tumble dryer.

l Clothes that are dripping wet

should not be put into the dryer.

l Glass fibre curtains should

NEVER be put in this machine.

Skin irritation may occur if

other

garments are contaminated

with

the glass fibres.

l Items that have been soiled

with substances such as cooking

oil, acetone, alcohol, petrol,

kerosene, spot removers,

turpentine, waxes and wax

removers should be washed in

hot water with an extra amount

of detergent before being dried

in the tumble dryer.

Remove all objects from pockets

such as lighters and matches.

l Lighters and matches must not

be left in pockets and NEVER

use flammable liquids near the

machine.

l Maximum load drying weight:

see energy label.

To consult the product technical

specification please refer to the

manufacturer website.

WARNING

Foam rubber materials can

under certain circumstances,

when heated become ignited

by spontaneous combustion.

Items such as foam rubber

(latex foam), shower caps,

waterproof textiles, rubber

backed articles and clothes

or pillows fitted with foam

rubber pads MUST NOT be

dried in the tumble dryer.

WARNING

Do not tumble dry fabrics

treated with dry cleaning fluids.

2. WATER CONTAINERS

The water removed from the laundry during

the drying cycle is collected in a container.

When the container is full, an indicator light,

or on some models a message on the

display, will advise you that it MUST be

emptied (however, we recommend to empty

it after each drying cycle).

1. Gently pull out the water container

holding the handle (A).

When it is full the water container will

weigh about 6 kg.

2. Tilt the water container to empty the

water out through the spout (B).

When empty, replace the water container

back as shown; (C) first insert the base of

the container into position as shown (1)

then gentle push the top into position (2).

3. Press the programme start button to

restart the cycle.

*Depending on model

1. Gently pull the top of the kickplate so

that it unclips from the dryer. The bottom

section can then be unhinged allowing

the kickplate to be completely removed (A).

2. Pull firmly on the handgrip and slide the

water container out of the dryer (B).

Support the container with both hands

(C). When full, the water container will

weigh about 4 kg.

3. Open the lid located on the top of the

container and empty the water at the end

of each drying cycle and before starting

. the next one (D)

4. Refit the lid and slide the water container

back into position (D). PUSH FIRMLY

INTO PLACE.

5. Refit the kickplate by engaging the

hinges at the top and 'snapping' the lower

clips into place.

*Depending on model

Very little water will collect during the

first few cycles of a new machine as an

internal reservoir is filled first.

To remove the container tank in

door drawer *

ONLY FOR MODELS WITH DRAIN

HOSE KIT

If you have the option of drainage

near to the dryer you can use the

discharge kit to provide a permanent

drainage for the water collected in the

container of the dryer. This means

that you don't have to empty the water

container.

To remove the container bottom

water drawer *

3. DOOR, FILTER AND

CONDENSER

l Pull on handle to open the door.

l To restart the appliance, close the door

and press the programme start button.

Filter cleaning indicator light

It lights up when the cleaning of the filter is

requested: check the filter and eventually

clean it.

If the laundry is not drying check that the

filter is not clogged.

1. Pull the filter upwards.

2. Open filter as shown.

3. Gently remove lint from filter using your

fingertips or a soft brush, a cloth or under

water running.

4. Snap the filter together and push back

into place.

Door

WARNING

When the tumble dryer is in use the

drum and door may be VERY HOT.

WARNING

If you open the door mid cycle, before

the cool-down cycle has completed,

the handle may be hot. Please use

extreme caution when attempting to

empty the water reservoir during the

cycle.

Filter

Clogged filters could increase the

drying time and cause damages and

expensive cleaning operation.

To maintain the efficiency of the dryer

check that all filters are clean before

each drying cycle.

WARNING

Do not use the tumble dryer without

the filters.

If you clean filter under water, remember

to dry it.

WARNING

Clean the filter before every cycle.

To clean the lint filter

1. Remove the kickplate.

2. Turn the locking levers clockwise and pull

out the condenser.

3. Pull out the condenser unit.

4. Gently remove any dust or fluff with a

cloth, then wash the unit by holding it

under a running tap turning it so that

water flows between the plates, to

remove any dust or fluff.

5. Refit the condenser ensuring it is in the

correct way (as indicated by the arrow)

and pushed firmly into place.

6. -Lock the levers by turning them anti

clockwise. Be sure that condenser unit

fixed to the basement tightly.

7. Refit the kickplate.

4 5

To clean the condenser

l Clean the filter and empty the water

container after every drying cycle.

l Regularly clean the condenser.

l After each period of use, wipe the inside

of the drum and leave the door open for a

while to allow circulation of air to dry it.

l Wipe the outside of the machine and the

door with a soft cloth.

l DO NOT use abrasive pads or cleaning

agents.

l To prevent the door sticking or the

buildup of fluff clean the inner door and

gasket

with a damp cloth after every drying

cycle.

Cleaning the dryer

WARNING

The drum, door and load may be very

hot.

WARNING

Always switch off and remove the plug

from the electricity supply before

cleaning this appliance.

WARNING

For electrical data refer to the rating

label on the front of the dryer cabinet

(with the door open).

Produktspecifikationer

Varumärke:	Hoover
Kategori:	Torktumlare
Modell:	HLE C8TRGR-80
Färg på produkten:	Wit
Förpackningens vikt:	6800 g
Skärm diagonal:	15 "
Upplösning:	1024 x 768 Pixels
Pekskärm:	Ja
Betraktningsvinkel, horisontell:	160 °
Betraktningsvinkel, vertikal:	140 °
Skärmform:	Flat
Typiskt kontrastförhållande:	700:1
Ljusstyrka:	200 cd/m²
Pekskärmstyp:	Tafelblad
Förpackningsmått (BxDxH):	436 x 370 x 195 mm
Frekvensområde horisontellt:	31.5 - 80 kHz
Frekvensområde vertikalt:	56 - 75 Hz
VGA (D-Sub) port(ar):	1
Certifiering:	C-Tick; cUL, IC; CCC; CE; VCCI; KCC, e-Standby; BSMI Mark; UL, FCC; CB; RoHS, China RoHS, WEEE, IMERC
Display, antal färger:	16,2 miljoen kleuren
Displayteknik:	LCD
Respons tid:	25 ms
Grafikupplösningar som stöds:	720 x 400,1024 x 768 (XGA),640 x 480 (VGA),800 x 600 (SVGA)
Panelmonteringsgränssnitt:	75 x 75 mm
Bildförhållande:	4:3
Effektiv bilddiameter:	228 x 304 mm
Höjd (utan bas):	318 mm
Bredd (utan bas):	358 mm
Vikt (utan bas):	2730 g
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
On Screen Display (OSD):	Ja
Förvaringstemperatur:	-20 - 60 °C
Förvaringsfuktighet:	10 - 90 procent
Medeltid mellan fel (MTBF):	50000 uur
Antal uppströmsportar:	1
Upphängningssystem för väggen:	Ja
USB:	Ja
Pekskärmsteknik:	Resistief
OmniTapps Multitouch-kompatibilitet:	Nee
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Strömförbrukning (typiskt):	10 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	20 - 80 procent