Horizon Fitness 7.0AT Bruksanvisning

Läs gratis den bruksanvisning för Horizon Fitness 7.0AT (10 sidor) i kategorin Löpband. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5 recensioner. Har du en fråga om Horizon Fitness 7.0AT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/10
7.0AT- TREADMILLS 03
TM1 002C
SERVICE MANUAL
ISSUED - -07 2022 06
JOHNSON HEALTH INDUSTRY (VIETNAM)
V1
S I ERIAL NUMBER NFORMATION
Table of Contents
7.0AT-03
5
Service Manual
Product Record
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
P M REVENTIVE AINTENANCE
Table of Contents
7.0AT-03
8
Service Manual
The running belt has been properly adjusted at the factory before it was shipped. At mes the belt can
move o-center during shipment. Before operang the treadmill, make sure the belt is centered and
remains centered to maintain smooth operaon.
If the running belt is too far to the right side: With the
treadmill running at 1 mph, turn the le adjustment bolt
counter-clockwise ¼ turn at a me (using the supplied
Allen wrench). Check the belt alignment. Allow belt to run
a full cycle to gauge if more adjustment is needed. Repeat
if necessary, unl the belt remains centered during use.
If the running belt is too far to the le side: With the
treadmill running at 1mph, turn the le adjustment bolt
clockwise ¼ turn at a me (using the supplied Allen
wrench). Check the belt alignment. Allow belt to run a full
cycle to gauge if more adjustment is needed. Repeat if
necessary, unl the belt remains centered during use.

Produktspecifikationer

Varumärke: Horizon Fitness
Kategori: Löpband
Modell: 7.0AT

Behöver du hjälp?

Om du behöver hjälp med Horizon Fitness 7.0AT ställ en fråga nedan och andra användare kommer att svara dig