Hoshizaki HS-5462 Bruksanvisning
Hoshizaki
ej kategoriserat
HS-5462
Läs gratis den bruksanvisning för Hoshizaki HS-5462 (6 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Hoshizaki HS-5462 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
1
2A9185-011
Hoshizaki Optional Heated Overow Drain Pan Kit
HS-5462
For Use with Steelheart Refrigerator Series Upright Models
Installation Instructions
Check to ensure that all parts are included:
Index
No. Description
Part
Number Qty
1 Heated Overow Drain Pan 3B0185-01 1
2 Heated Overow Drain Pan Bracket 3B0247-01 1
3 Drain Elbow (1 and 2) 4A1017-01 2
4 Vinyl Hose A (15 1/8 in. (385 mm)) 7725-1923 1
5 Vinyl Hose B (68 in. (1727 mm)) 7725-1923 1
6 Wire Harness (8 ft. (2 m)) 4A6586-01 1
7 Self-Drilling Hex Screw 7B03I1210 8
8 437618-01 8Nylon Tie Mount
9 8911-0200 8Nylon Tie
10 Wire Clamp 4A0809-03 1
11 Bushing 428394-01 2
12 Junction Box 3B0361-01 1
13 Wiring Label 3B0115-01 1
WARNING
• The appliance should be serviced only by qualied service personnel to reduce the risk of death, electric
shock, serious injury, or re.
• No installation or service should be undertaken until the technician has thoroughly read these instructions.
Failure to follow these instructions will adversely affect safety, performance, component life and warranty
coverage, and may result in costly water damage.
• To reduce the risk of electric shock, do not touch the plug with damp hands. Move the power switch to the
"OFF" position, then unplug the appliance from the electrical outlet before servicing.
Installation Instructions - Repeat these instructions for second kit on 3-section models
1) Unplug the appliance from the electrical outlet.
2) Move the appliance out to access the rear of the appliance.
3) Remove the front, control, right side, and top panels from the appliance. See Fig. 1.
4) Remove the nylon tie connecting the existing drain hose to the evaporator drain pipe. Remove the existing drain hose and discard.
See Fig. 2.
Fig. 1
Model Shown: R1A-FS
Top Panel
Right
Side Panel
Existing
Drain Hose
Nylon Tie
Fig. 2
Front Panel
Control Panel
Evaporator
Drain Pipe
2
2A9185-011
6) Connect one end of vinyl hose A (15-1/8 in. (385 mm)) provided in this kit, to the open end of drain elbow 1 and route it to the
back of the appliance under the channel cover. See Fig. 4.
7) Connect one end of the 2nd elbow provided in this kit, to the open end of vinyl hose A
(15-1/8 in. (385 mm)). See Fig. 4.
NOTICE! Be sure drain elbow 2 is properly positioned on vinyl hose A
(15-1/8 in. (385 mm)).
8) Place the heated overow drain pan provided in this kit, into the heated overow drain pan bracket provided in this kit. See Fig. 5.
Fig. 4
Channel Cover
Fig. 5
Heated Overow
Drain Pan Assembly
Heated Overow Drain
Pan Bracket
Fig. 3
Drain Elbow 1
Evaporator Drain Pipe
5) Connect one end of a drain elbow provided in this kit, to the evaporator drain pipe. See Fig. 3. NOTICE! Be sure drain elbow 1 is
properly positioned on the evaporator drain pipe.
Rear
Front
Heated Overow
Drain Pan
Front
Rear
Model Shown: R1A-FS
Heated Overow Drain
Pan Power Cord
Heated Overow Drain
Pan Power Cord
Model Shown: R1A-FS
Vinyl Hose A
Evaporator Drain Pipe
Drain Elbow 1
Drain Elbow 2
Evaporator Drain Pipe
Drain Pan Heater
3
2A9185-011
15-3/4 in.
(400 mm)
12-7/8 in.
(327 mm)
2 in.
(51 mm)
9) Mount the heated overow drain pan assembly.
1-Section and 3-Section: From the rear of the appliance, measure from the right side (and from the left side for 3-section models)
of the appliance 13-3/4 in. (349mm) and up from the bottom 1-3/4 in. (44 mm) to 2 in. (51 mm) and place a mark. See Fig. 6.
Next, place the heated overow drain pan assembly at the rear and beneath the appliance, ush to the bottom, and with the center
mounting hole lined up to the mark made. See Fig. 6. Lift the heated overow drain pan assembly ush against the rear panel of the
appliance and secure using 4of the self-drilling hex screws provided in this kit. The heated overow drain pan power cord should be
on the left side from the rear view.
Fig. 6
2 in.
(51 mm)
Self-Drilling
Hex Screws
Heated Overow Drain
Pan Power Cord
Heated Overow Drain Pan Assembly
Model Shown: R1A-FS
Place Mark on 1 and 3-Section Here
Fig. 7
Self-Drilling
Hex Screws
Heated Overow Drain
Pan Power Cord
Heated Overow Drain Pan Assembly
Model Shown: R2A-FS
Place Mark on 2-Section Here
2-Section: From the rear of the appliance, measure from the left side of the appliance 15-3/4 in. (400 mm) and up from the bottom
1-3/4 in. (44 mm) to 2 in. (51 mm) and place a mark. See Fig. 7. Next, place the heated overow drain pan assembly at the rear and
beneath the appliance, ush to the bottom, and with the center mounting hole lined up to the mark made. See Fig. 7. Lift the heated
overow drain pan assembly ush against the rear panel of the appliance and secure using 4of the self-drilling hex screws provided
in this kit. The heated overow drain pan power cord should be on the left side from the rear view.
10) Connect one end vinyl hose B (68 in. (1727 mm)) to the open end of drain elbow 2. See Fig. 8. Place the other end of vinyl hoseB
(68 in. (1727 mm)) into the heated overow drain pan assembly as shown in Fig. 9. NOTICE! Be sure vinyl hose B is properly
positioned on drain elbow 2.
Fig. 8
Fig. 9
Model Shown: R1A-FS
Vinyl Hose B
Drain Elbow 2
Heated Overow Drain Pan Assembly
Vinyl Hose A
Vinyl Hose B
*
*
Produktspecifikationer
| Varumärke: | Hoshizaki |
| Kategori: | ej kategoriserat |
| Modell: | HS-5462 |
Behöver du hjälp?
Om du behöver hjälp med Hoshizaki HS-5462 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Hoshizaki Manualer
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
ej kategoriserat Manualer
- UNITEK
- Razer
- Ceado
- BEKO
- Panduit
- Saris
- TCL
- Newline
- Wharfedale
- Vulcan
- OmniMount
- Aiper
- Smart365
- Microchip
- Valera
Nyaste ej kategoriserat Manualer
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025
29 Juni 2025