Hotpoint H3 D81GS UK Bruksanvisning
                    Hotpoint
                    
                    Torktumlare
                    
                    H3 D81GS UK
                
                                
    Läs gratis den bruksanvisning för Hotpoint H3 D81GS UK (4 sidor) i kategorin Torktumlare. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 6 recensioner. Har du en fråga om Hotpoint H3 D81GS UK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/4
                    
                    
                    
CARE LABEL
Always check the care labels, especially when placing garments 
in the tumble dryer for the  rst time. Below are the most 
commonly used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance, please 
register your product on www.hotpoint.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety 
Instructions.
FIRST TIME USE
Remove all the tapes used to hold items on the machine.
Before you use it, clean the inside of the drum to remove any 
dust that could have accumulated during transport. Slight odour 
or vapour may be found if you open the door during its rst use, 
this is normal and should only last a few minutes. 
Make sure that the water tank is correctly inserted. Make sure 
that the drain hose on the back of the dryer is properly 
connected, either to the dryers's water tank or to your domestic 
drainage system.
The dryer must be installed in a room with a temperature 
ranging between 5°C and 35°C to ensure proper operation.
DAILY USE
Doing this will keep your machine working at its BEST:
- remember to empty your water tank after each drying cycle.
- remember to clean your condenser unit regularly 
(monthly).
- remember to clean your lter after each drying cycle.
Refer to the Care & Maintenance section.
1. Plug the dryer into the power supply socket.
2. Open the door and load garments; always refer to instructions on 
clothing labels and the max loads indicated in the programme 
section. Empty pockets. Make sure garments do not get caught 
between the door and/or the door lter. Do not load items that 
are dripping wet. Do not tumble dry large, very bulky items.
3. Close the door.
4. Press the "On/O" button. 
5. Select the most suitable programme 
for the type of fabric in that 
load.
6. Select the options, if necessary.
7. Press the "
Start/Pause" 
button to begin drying.
8. At the end of the drying cycle, a buzzer will beep. An indicator on 
the control panel signals the end of the cycle. Pull the load out 
immediately to prevent the formation of creases on laundry. 
9. Turn the machine o by pressing the "On/O" button, open the 
door and pull the clothing out. If the machine is not switched o 
manually, after about a quarter of an hour from the end of the 
cycle , the appliance turns o automatically to save energy.
Note that some programme/option accords with "Crease Care" 
system. This means that for some hours, after the end of the 
drying cycle, the drum rotates at regular intervals to prevent the 
formation of creases.  
In case of power failure, it is necessary to press the "Start/Pause" 
button to restart the cycle.
TRANSPORT AND HANDLING
Never lift the dryer by holding on to its top side.  
1.  Unplug the dryer
2.  Remove the water from the water tank completely.
3.  Make sure that door and water tank are properly closed.
4.  If the drain hose is connected to your drainage system, re-connect 
it to the back of the dryer (see "Installation" section in the Safety 
Instructions).
OPENING THE DOOR DURING THE CYCLE
Laundry can be checked while the drying cycle runs and any 
garments already dry can be removed, while drying continues for 
the remaining items. After closing the door, press the "Start/Pause" 
button to resume machine operation. 
CONTROL PANEL 
1  ON/OFF Button (hold to Reset)
2  Programme Selection Knob
3  Start/Pause 
Options Buttons
4  Crease Care
5  Dryness Level 
6  Start Delay
7  Timed Drying
8  Cycle End Signal
9  Gentle (hold for Key Lock)
10  Rapid  hold to Mute)(
INDICATORS
Dryness Level:   Iron Dry -   Hanger Dry -   Cupboard Dry -    Extra Dry
Programme Status:     ENDDrying -   Cool Down -   End of Cycle 
 Empty water tank Clean door lter -   -  Clean the condenser unit
Refer to the troubleshooting section:    Failure: Call after sales service. 
END
EN
EN
EN
END
D
D
D
1
3
2
4
10
8
9
5 6 7
h
h
h
h
h
h
Produktspecifikationer
| Varumärke: | Hotpoint | 
| Kategori: | Torktumlare | 
| Modell: | H3 D81GS UK | 
Behöver du hjälp?
Om du behöver hjälp med Hotpoint H3 D81GS UK ställ en fråga nedan och andra användare kommer att svara dig
Torktumlare Hotpoint Manualer
                        
                         11 Oktober 2025
                        
                    
                                                            
                        
                         9 Oktober 2025
                        
                    
                                                            
                        
                         8 Augusti 2025
                        
                    
                                                            
                        
                         7 Augusti 2025
                        
                    
                                                            
                        
                         5 Augusti 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         28 Juli 2025
                        
                    
                                                            Torktumlare Manualer
- Otsein-Hoover
- Proficare
- Svan
- Toshiba
- Point
- Aliomatic
- Blomberg
- Amana
- Orbegozo
- Adler
- Electra
- Coline
- Kogan
- Mesko
- Continental Edison
Nyaste Torktumlare Manualer
                        
                         23 Oktober 2025
                        
                    
                                                            
                        
                         23 Oktober 2025
                        
                    
                                                            
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         20 Oktober 2025
                        
                    
                                                            
                        
                         20 Oktober 2025
                        
                    
                                                            
                        
                         19 Oktober 2025
                        
                    
                                                            
                        
                         18 Oktober 2025
                        
                    
                                                            
                        
                         17 Oktober 2025
                        
                    
                                                            
                        
                         17 Oktober 2025