Hotpoint V4D 01 P (UK) Bruksanvisning
                    Hotpoint
                    
                    Torktumlare
                    
                    V4D 01 P (UK)
                
                                
    Läs gratis den bruksanvisning för Hotpoint V4D 01 P (UK) (4 sidor) i kategorin Torktumlare. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5.5 recensioner. Har du en fråga om Hotpoint V4D 01 P (UK) eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/4
                    
                    
                    
Instruction booklet
TUMBLE DRYER
FLUFF FILTER
You must clean the fluff filter after EVERY drying cycle.
Step 1 - Open the door of your dryer, remove the filer.
Step 2 - Clean any fluff deposits from the filter mesh, and refit the filter.
Step 3 - Make sure the filter is pushed fully home - NEVER run the dryer 
without the filter in position.
Failure to clean the filter after EVERY drying cycle will affect the drying 
performance of your machine.
V4D 01 P
To remove the filter
!
Installation
WHERE TO PUT YOUR DRYER
The dyer should be placed where air can freely 
circulate around it preferably near a window 
that can be opened to reduce the possibility of 
condensation occurring while the dryer is in use.
If the dryer is enclosed or fitted under a work 
surface a gap of at least 50 mm (2”) must be 
allowed above the top for the full width of the dryer 
and at least 25 mm (1”) either side. This allows 
air to enter into the rear air inlet. The dryer must 
never be run in a cupboard with a closed door.
The dryer must never be installed behind a 
lockable door, a sliding door or a door with a hinge 
on the opposite side to that of the dryer door.
 This symbol reminds you to read this booklet.
VENTILATION
When the dryer is in use there has to be adequate 
ventilation to avoid the back flow of gases into 
the room from appliances burning other fuels, 
including open fires.
The vent tube should not exceed 2.4 metres in length.
The tube should be kept clear of the air intake vent 
and kinks or ‘U’ bends must be avoided as these 
will obstruct the tube and trap condensation.
ELECTRICAL CONNECTIONS
The socket must be grounded. The power supply cord should be checked periodically and, if required, 
replaced by a cord specially prepared for this dryer.
Laundry
MAX LOAD SIZE
Do not load more than maximum capacity.  
These numbers refer to dry weight:
Natural fibres: 4kg max
Synthetic fibre: 2kg max
WASH CARE LABELS
Look at the labels on your garments, especially when tumble drying 
for the first time. The following symbols are the most common:
May be tumble dried
Do NOT tumble dry
Tumble dry at high heat setting
Tumble dry at low heat setting
ITEMS NOT SUITABLE FOR TUMBLE DRYING
1.  Articles that contain rubber or rubber-like materials or plastic 
film, any flammable articles or objects that contain flammable 
substances.
2. Glass fibres.
3. Items which have been dry cleaned.
4.  Large bulky items (quilts, sleeping bags, etc). These expand 
when drying and prevent airflow through the dryer.
Our ideas. Your home.
Our ideas. Your home.
Produktspecifikationer
| Varumärke: | Hotpoint | 
| Kategori: | Torktumlare | 
| Modell: | V4D 01 P (UK) | 
Behöver du hjälp?
Om du behöver hjälp med Hotpoint V4D 01 P (UK) ställ en fråga nedan och andra användare kommer att svara dig
Torktumlare Hotpoint Manualer
                        
                         11 Oktober 2025
                        
                    
                                                            
                        
                         9 Oktober 2025
                        
                    
                                                            
                        
                         8 Augusti 2025
                        
                    
                                                            
                        
                         7 Augusti 2025
                        
                    
                                                            
                        
                         5 Augusti 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         29 Juli 2025
                        
                    
                                                            
                        
                         28 Juli 2025
                        
                    
                                                            Torktumlare Manualer
- Philco
 - Gibson
 - Makita
 - Nordmende
 - Klarstein
 - Siemens
 - General Electric
 - Khind
 - Daewoo
 - Mio Star
 - Westinghouse
 - Neff
 - Bush
 - Gemini
 - Fagor
 
Nyaste Torktumlare Manualer
                        
                         23 Oktober 2025
                        
                    
                                                            
                        
                         23 Oktober 2025
                        
                    
                                                            
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         20 Oktober 2025
                        
                    
                                                            
                        
                         20 Oktober 2025
                        
                    
                                                            
                        
                         19 Oktober 2025
                        
                    
                                                            
                        
                         18 Oktober 2025
                        
                    
                                                            
                        
                         17 Oktober 2025
                        
                    
                                                            
                        
                         17 Oktober 2025