HP LaserJet Ultra MFP M133 Bruksanvisning

HP Skrivare LaserJet Ultra MFP M133

Läs gratis den bruksanvisning för HP LaserJet Ultra MFP M133 (48 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7.5 recensioner. Har du en fråga om HP LaserJet Ultra MFP M133 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/48

Dansk 19 .............

Català 16 .............

Español 13 ...........

Italiano 10 ...........

Deutsch 7 .............

Français 4 ............

English 1 ..............

Norsk 37 ..............

Lietuvių .......... 34

Latviešu 31 ..........

Suomi 28 .............

Eesti ............... 25

Nederlands 22 ......

Svenska 43 ..........

Português 40 .......

Windows

1. For Windows 7 or lower, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During Windows software installation, select the option to connect

through a network.

Mac

1. For Mac, connect the USB cable between the computer and the printer

before installing the software.

2. Continue to “6. Locate or download the software installation les.”

Wireless network connection

(wireless models only)

Touchscreen control panels

1. To connect the printer to a wireless (Wi-Fi) network, on the printer control

panel, touch the Wireless button.

2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select the

network name from the SSID list, or enter the network name if it is not

listed.

3. Use the keyboard to enter the passphrase, and then touch the button.OK

4. Wait while the printer establishes a network connection.

5. On the printer control panel, touch the Network button. If an IP address

is listed, the network connection has been established. If not, wait a few

more minutes and try again. Note the IP address for use during software

installation. Example IP address: 192.168.0.1

6. To print from a computer, continue with “6. Locate or download the

software installation les.” To print from a phone or tablet only,

continue with “8. Mobile and wireless printing (optional).”

2-line control panels

1. To connect the printer to a wireless (Wi-Fi) network, make sure that the

printer, access point, and computer are turned on and that the computer

is connected to the wireless network.

2. A USB cable will be required.

3. Disconnect any USB or Ethernet cable that is connected to the printer.

4. To print from a computer, continue with “6. Locate or download the

software installation les.” To print from a phone or tablet only,

continue with “8. Mobile and wireless printing (optional).”

NOTE: During software installation, select the option to Help me set up a

rst-time wireless connection.

Wired (Ethernet) network connection

(optional)

Use a standard network cable.

1. Connect the network cable to the printer and to the network. Wait a few

minutes for the printer to acquire a network address.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Connect through

a network.

www.hp.com/support/ljM129MFP www.register.hp.com

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

IMPORTANT:

Follow Steps 1 - 3 on

the printer hardware setup

poster, then continue

with Step 4.

Select a connection method

Set up the control panel

At the printer control panel, check the display status before beginning software installation.

Manually congure the IP address

See the printer user guide for information on how to manually congure the IP

address www.hp.com/support/ljM129MFP.

LaserJet Pro MFP M129-M132,

LaserJet Ultra MFP M133-M134

Getting Started Guide

Produktspecifikationer

Varumärke:	HP
Kategori:	Skrivare
Modell:	LaserJet Ultra MFP M133
Typ av operation:	Touch
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Ja
Bredd:	600 mm
Djup:	500 mm
Höjd:	- mm
Snäll:	Muurmontage
Avgasanslutningsdiameter:	150 mm
Maximal utsugskapacitet:	800 m³/uur
Extraktionsmetod:	Afvoerend/recirculerend
Ljudnivå (låg hastighet):	37 dB
Antal lampor:	2 gloeilamp(en)
Typ lampa:	Halogeen
Höjd (min):	630 mm
Höjd (max):	1010 mm
Strömlampa:	20 W
Ljudnivå (hög hastighet:	59 dB
Avtagbart filter:	Ja
Antal hastigheter:	5
Intensivt läge:	Ja
Avgasplats:	Boven
Höjd utan skorsten:	50 mm
Fjärrkontroll ingår:	Ja
AC-ingångsspänning:	220 V
Strömförbrukning (typiskt):	200 W
Indikatorfilterrengöring:	Ja