HuddleCamHD HCM-2 Bruksanvisning
Läs gratis den bruksanvisning för HuddleCamHD HCM-2 (2 sidor) i kategorin Videokonferenssystem. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om HuddleCamHD HCM-2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Step 2
For masonry or drywall wall:
Place included anchors (Fig 1, #1) in wall and
mount to anchors using included #10 sheet
metal screws. (Fig 1, #2)
For double gang electrical box:
Mount to box using #6 machine screws and
washers. (Fig 1, #3)
What s Included’
QTY —Large Wall Mount BK/WH1
QTY — x 1" Conical Plastic Anchor 1/4" Drill Size (Fig 1, #1)4 10-12
QTY — x 1 1/4" PPH Sheet Metal Screw with Flat Washer (Fig 1, #2)4 #10-16
QTY — x 1" PPH Machine Screw (Fig 1, #3)4 #6-32
QTY — PPH and QTY — Machine Screw Flat Washer (Fig 1, #4)4 1/4”-20x 3/8” 2 1/4”
Fig 1
Rev 2.2
8/212020
HCM 2-
Large Base Camera
Wall Mount
Setup Guide
Mounng Instrucons
Step 1
For masonry or drywall wall:
Posion Large wall mount (Fig 2) on wall and
mark wall for anchor placement (Fig 2, # 1). Pre-
drill 1/4" holes, minimum deep. 1”
For double gang electrical box:
Posion over box with slots overlaying device
mounng holes (Fig 2, #1) on box.
#2
#1
#3
#4
For more informaon on HuddleCamHD
mounts and other products please visit:
hps://huddlecamhd.com Rev 2.2
8/21/2020
HuddleCamHD
HC12X HUDDLEVIEW-
HC20X SIMPLETRACK2-
Generaon 1 USB 3.0 HuddleCamHD cameras
Step 4
Mount Camera to mount (Fig 2, #3) with
included 1/4 20 machine screw. (Fig 1, # -
4)
Ulize (0,1,2) machine screw at 1/4”
washers as required. (Fig 1, #4) Note: 1/4”
machine screw at washers are to be
used depending upon depth of thread in-
sert in base of camera, in order to achieve
a snug t. Pass all cables through opening
in mount (Fig 2, #2) and connect.
Mounng Instrucons Connued...
Mount Compability
Step 3
Drill hole in wall through rear exit opening for
cable access, or use base exit opening. (Fig 2, #2)
Other Cameras…
This mount has been
designed for use with most
large based cameras ulizing
a 1/4 20” -mounng hole as
can be found on SONY,
Panasonic, Cisco, Polycom
and Vaddio cameras.
Produktspecifikationer
| Varumärke: | HuddleCamHD |
| Kategori: | Videokonferenssystem |
| Modell: | HCM-2 |
Behöver du hjälp?
Om du behöver hjälp med HuddleCamHD HCM-2 ställ en fråga nedan och andra användare kommer att svara dig
Videokonferenssystem HuddleCamHD Manualer
7 Januari 2025
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
22 September 2024
Videokonferenssystem Manualer
- Grandstream
- Roland
- Iiyama
- JPL
- Bose
- Kramer
- Anchor Audio
- Atlona
- Hikvision
- Totolink
- WyreStorm
- DataVideo
- Logitech
- Marshall Electronics
- Alfatron
Nyaste Videokonferenssystem Manualer
16 Juni 2025
1 April 2025
20 Februari 2025
15 Februari 2025
8 Februari 2025
8 Januari 2025
5 Januari 2025
4 Januari 2025
27 December 2024
27 December 2024