Hudson Valley Southold 3931-AGB Bruksanvisning
Hudson Valley
ej kategoriserat
Southold 3931-AGB
Läs gratis den bruksanvisning för Hudson Valley Southold 3931-AGB (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5.5 recensioner. Har du en fråga om Hudson Valley Southold 3931-AGB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
FIXTURE INSTALLATION
1. Determine the location for the lamp. Using the mounting plate as a template, mark the location of the holes for
the wall anchors.
2. Drill the appropriate size holes for the WALL ANCHORS(5). (the holes should be slightly smaller than the size of
the anchors.) Install the wall anchors to the hole.
3. Attach the MOUNTING PLATE (1) onto the junction box using the MOUNTING SCREWS (2). This fixture is
designed to be mounted on standard junction box. The junction box must be securely mounted to the structure
of the building. Screw in the WOOD SCREW (6) to the anchors.
4. Attach the MOUNTING PLATE (1) unto the junction box using the MOUNTING SCREWS (2). This fixture is
designed to be mounted on standard round or octagon junction box. The junction box must be securely mounted
to the structure of the building.
5. Attach the Ground wire (Green) to the ground inside the outlet box (Generally green or bar copper wire) or the
GROUND SCREW (3) on the MOUNTING PLATE (1). NEVER CONNECT GROUND WIRE TO "HOT" WIRE!
FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
6. Connect the white fixture lead to the neutral (Generally white) wire in the outlet box. Fasten the wires together
with an approved fastener (WIRE NUT) (4). Starting 1" below the fastener, tightly wrap the connection with
electrical tape so that the connections seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED
WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
4. Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires
same as previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS
COULD RESULT IN SERIOUS INJURY OR DEATH!
5. Attach the FIXTURE ASSEMBLY (8) to the MOUNTING PLATE (1) and secure with the SET SCREWS (7).
6. Screw the BULB (9) up into the SOCKET of the fixture.THIS FIXTURE IS RATED FOR 60 WATT LAMP. DO
NOT EXCEED THE RECOMMENDED WATTAGE!
7. Screw the GLASS (9) up into the FIXTURE ASSEMBLY .
8. Restore power to the outlet at the breaker or fuse box.
ITEM DESCRIPTION PART NUMBER
1
MOUNTING PLATE
HDW-003931
2
MOUNTING SCREW HDW-003931
3
GROUND SCREW HDW-003931
4
WIRE NUT HDW-003931
5
WALL ANCHORS HDW-003931
6
WOOD SCREW HDW-003931
7
M4 SET SCREWS HDW-003931
8
FIXTURE ASSEMBLY FAS-003931
9
BULB NOT INCLUDED
10
GLASS GLS-003931
SOUTHOLD
3931
INSTALLATION INSTRUCTIONS
www.hvlgroup.com
Questions? We're here to help!
Contact us at CustomerService@hvlgroup.com
WARNING/CAUTION
·DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS
COMPLETELY BEFORE STARTING INSTALLATION.
·TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND
MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED
FACTORY TRAINED TECHNICIAN.
·CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS
AFTER USE.
·REMOVE THE FIXTURE, PARTS AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE
CARTON, DOUBLE CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR
TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
·DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL DIMMING DEVICE. ONLY USE
TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT
FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL
ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE.
·PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
1
2
3
4
5
6
7
8
10
9
Produktspecifikationer
| Varumärke: | Hudson Valley |
| Kategori: | ej kategoriserat |
| Modell: | Southold 3931-AGB |
Behöver du hjälp?
Om du behöver hjälp med Hudson Valley Southold 3931-AGB ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Hudson Valley Manualer
29 Juni 2025
29 Juni 2025
28 Juni 2025
ej kategoriserat Manualer
- ResMed
- NGS
- IQAir
- Volcano
- Logic
- Carson
- Mennekes
- Salus
- Waveplayer Systems
- Panduit
- Kluge
- Dynatrap
- Dell
- AMX
- Mercyu
Nyaste ej kategoriserat Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025