Husqvarna 576 XP AutoTune Bruksanvisning

Husqvarna Sågmaskin 576 XP AutoTune

Läs gratis den bruksanvisning för Husqvarna 576 XP AutoTune (48 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Husqvarna 576 XP AutoTune eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/48

EEEEnnnngggglllliiiisssshhhh

570 AutoTune 576XP

AutoTune 576XPG

AutoTune

Operator’s manual

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

KEY TO SYMBOLS

2 – English

Symbols on the machine:

WARNING! Chainsaws can be

dangerous! Careless or improper use

can result in serious or fatal injury to

the operator or others.

Please read the operator’s manual

carefully and make sure you

understand the instructions before

using the machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

• Protective goggles or a visor

Both of the operator′

s hands must be

used to operate the chain saw.

Never operate a chain saw holding it with

one hand only.

Contact of the guide bar tip with any

object must be avoided.

Tip contact may cause the guide bar to

move suddenly upward and backward

(so-called kickback), which may cause

serious injury.

Decompression valve:

The valve is to

reduce the pressure in the cylinder and

make starting easier. You should always

use the decompression valve when

starting the machine.

Ignition; choke:

Set the choke control

in the choke position. This should

automatically set the stop switch to the

start position.

Adjustment of the oil pump

Refuelling.

Filling with oil and adjusting oil ﬂow.

If your machine bears this symbol it is

equipped with heated handles.

Chain brake, activated (right) Chain

brake, not activated (left)

The rating plate

showing serial number.

yyyy

is the production

year,

is the productionweek.

Other symbols/decals on

the machine refer to

special certiﬁcation

requirements for certain

markets.

Symbols in the operator’s

manual:

Switch off the engine by moving the stop

switch to the STOP position before

carrying out any checks or

maintenance.

Always wear approved protective

gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be

worn.

Refuelling.

Filling with oil and adjusting oil ﬂow.

The chain brake must be engaged when

the chainsaw is started.

WARNING! Kickback may occur when

the nose or tip of the guide bar touches

an object, and cause a lightning fast

reverse reaction, kicking the guide bar

up and towards the operator. May

cause serious personal injury.

yyyywwxxxxx

KEY

O SYMBOLS

English

–

The Emissions Compliance P

eriod referred to on the

Emission Compliance label indicates the number of

operating hours for which the engine has been shown to

meet Federal emissions requirements. Category C = 50

hours, B = 125 hours, and A = 300 hours.

Maintenance, replacement, or repair of the emission

control devices and system may be performed by any

nonroad engine repair establishment or individual.

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

Produktspecifikationer

Varumärke:	Husqvarna
Kategori:	Sågmaskin
Modell:	576 XP AutoTune
Färg på produkten:	Zwart
Bredd:	992 mm
Djup:	7 mm
Höjd:	670 mm
Snäll:	Huisraad spatwand
Material:	Glas
Antal per paket:	1 stuk(s)
Typ av enhet:	Kookplaat