Husqvarna 576XP AutoTune Bruksanvisning
Läs gratis den bruksanvisning för Husqvarna 576XP AutoTune (44 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3.5 recensioner. Har du en fråga om Husqvarna 576XP AutoTune eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/44
EEEEnnnngggglllliiiisssshhhh
570 AutoTune
576XP AutoTune
576XPG AutoTune
Operator′s manual
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
KEY TO SYMBOLS
2 – English
Symbols on the machine:
WARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and
on label.
Decompression valve: The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Ignition; choke: Set the choke control
in the choke position. This should
automatically set the stop switch to the
start position.
Adjustment of the oil pump
If your machine bears this symbol it is
equipped with heated handles.
Chain brake, activated (right)
Chain brake, not activated (left)
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols in the operator’s
manual:
Switch off the engine by moving the stop
switch to the STOP position before
carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged when
the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTRODUCTION
Dear Customer, .................................................... 4
WHAT IS WHAT?
What is what on the chain saw? ........................... 5
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine′s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBLY
Fitting the bar and chain ....................................... 16
FUEL HANDLING
Fuel ...................................................................... 17
Fuelling ................................................................. 18
Fuel safety ............................................................ 18
STARTING AND STOPPING
Starting and stopping ........................................... 19
WORKING TECHNIQUES
Before use: ........................................................... 21
General working instructions ................................ 21
How to avoid kickback .......................................... 27
MAINTENANCE
General ................................................................. 29
Carburettor adjustment ......................................... 29
Checking, maintaining and servicing chain saw
safety equipment .................................................. 29
Muffler .................................................................. 31
Starter .................................................................. 32
Air filter ................................................................. 33
Spark plug ............................................................ 33
Lubricating the bar tip sprocket ............................ 34
Needle bearing lubrication ................................... 34
Adjustment of the oil pump ................................... 34
Cooling system ..................................................... 35
”Air Injection” centrifugal cleaning ........................ 35
Winter use ............................................................ 35
Heated handles .................................................... 36
Maintenance schedule ......................................... 37
TECHNICAL DATA
Technical data ...................................................... 38
Bar and chain combinations ................................. 39
Saw chain filing and file gauges ........................... 39
EC-declaration of conformity ................................ 40
Produktspecifikationer
| Varumärke: | Husqvarna |
| Kategori: | Sågmaskin |
| Modell: | 576XP AutoTune |
Behöver du hjälp?
Om du behöver hjälp med Husqvarna 576XP AutoTune ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Husqvarna Manualer
8 Februari 2025
8 Januari 2025
18 Oktober 2024
13 Oktober 2024
30 September 2024
16 September 2024
3 September 2024
31 Augusti 2024
29 Augusti 2024
28 Augusti 2024
Sågmaskin Manualer
- Duro Pro
- Ergofix
- Ferrex
- Worx
- Kress
- Hurricane
- ACG
- Solo
- Hammer
- Rikon
- Powerblade
- Stanley
- Qualcast
- Prime3
- Erbauer
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025