ICC ICRW11ICIV Bruksanvisning

Läs gratis den bruksanvisning för ICC ICRW11ICIV (2 sidor) i kategorin Kablar för PC och kringutrustning. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 6 recensioner. Har du en fråga om ICC ICRW11ICIV eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

888-ASK-4ICC [email protected] icc.com

© Copyright 2011, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0334-RevC

INSTALLATION INSTRUCTIONS

Raceway System

0” min.

1-1/4” max.

Cap will

extend up to

3/16”

from raceway

0” min.

2-1/4” max.

1/2” min.

2-1/4” max.

Ceiling

Max cut out:

ICRW11CExx - 3/4” diameter

ICRW12CExx - 1-3/8” diameter

ICRW13CExx - 1-3/4” diameter

Raceway Placement

With Base

3-27/32” min.

4” max.

Without Base

2-1/2” min.

4” max.

Raceway Placement

With Base

5-1/2” min.

5-3/4” max.

Without Base

3” min.

5-3/4” max.

Raceway Placement

With Base

3-25/32” min.

4” max.

Without Base

2-1/2” min.

4” max.

1-3/4” min.

2-1/2” max.

1-3/4” min.

2-1/2” max.

Inside Wall Corner

Outside Wall Corner

Raceway Placement

With BaseWithout Base

2” min.1” min.

2-1/4” max.2-1/4” max.

Figure 9: Used to transition from one size of raceway

to another

Figure 2: Routes cable from ceiling into the raceway

Figure 3: 90˚ is used for right angle turns on the same

surface. Base is slotted for screw down mounting, if

necessary.

Figure 4: Used to branch raceway runs. Base is slotted

for screw down mounting, if necessary.

Figure 5: Used to cover joint where two sections of

raceway come together

Figure 6: Used for closing the open end of raceway

Figure 7: Used for right angle turns around internal corners

Figure 8: Used for right angle turns around external

corners. Base is slotted for screw down mounting

Figure 1: Secure raceway with included adhesive

backing or drill holes for screw mounting. Use a level

to align raceway.

Ceiling entry

Joint Cover

Outside CornerInside Corner Cover

Tee

Flat Elbow

End Cap

Reducer

Produktspecifikationer