ICE Watch Cocorico Bruksanvisning

ICE Watch Titta Cocorico

Läs gratis den bruksanvisning för ICE Watch Cocorico (8 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 34 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 17.5 recensioner. Har du en fråga om ICE Watch Cocorico eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

ENGLISH

Getting started

Press

the winder.

Remove the plastic

stopper (in the direction

of the arrow).

Instructions

The watch must be serviced regularly in order for it to work correctly. The length of time between

services will vary depending on the model, climate and the care you take of your watch. As a

general rule, we recommend the following steps so that you can keep your watch in tip-top

condition for as long as possible.

- Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).

- Avoid prolonged exposure to sun, steam, contact with alcohol, detergents, perfume or

cosmetic products to prevent distorsion, discoloration or any damaging reaction.

- Do not use any watch or chronograph buttons while under water to prevent water from

entering the mechanism.

The information contained in this document belongs to ICE Universal Ltd and may not be

reproduced without its authorisation.

A) SETTING THE DATE

1. Gently pull the winder out to the 1st

position.

2. Turn the winder anticlockwise to set the

date. If the date is set between around 9pm

and 1am, it is possible that it will not change

the next day.

3. Return the winder to its normal position.

B) SETTING THE TIME

1. Gently pull the winder out to the 2nd

position.

2. Turn the winder to set the hour and minute

hands to the correct positions.

3. The second hand starts again when

the winder is pushed back into its normal

position.

C) USING THE CHRONOGRAPH

1. Press button A to start and stop the

chronograph (stop watch).

2. Press button B to re-set the chronograph.

D) CHOOSING THE CHRONOGRAPH’S

START POSITION

1. Gently pull the winder out to the 2nd

position.

2. Press button A to set the chronograph

second hand to the desired start position.

Hold down button A if you want to move the

chronograph hand forward quickly.

3. Return the winder to its normal position.

You should also use this procedure if the

chronograph hand does not return to its start

position after you press button B, as well as

when you replace the battery.

Second hand

Chrono minute hand

Minute hand

Button A

Button B

Chrono second hand

24 Hour Hand

1st position

2nd position

Normal winder position

Hour hand

Date

Produktspecifikationer

Varumärke:	ICE Watch
Kategori:	Titta
Modell:	Cocorico
Färg på produkten:	Zwart
Inbyggd display:	Ja
Vikt:	119 g
Bredd:	80 mm
Djup:	80 mm
Höjd:	33.5 mm
Snäll:	Batterijlader voor binnengebruik
Nuvarande:	12 A
Skärm diagonal:	2.4 "
Upplösning:	320 x 240 Pixels
Antal batterier/batterier som stöds:	1
Displayteknik:	IPS
Inspänning:	7-32 V
Förvaringstemperatur:	-20 - 60 °C
Spännande:	30 V
Kompatibel batteriteknik:	Lithium Polymer (LiPo), Lithium-Ion (Li-Ion), Nickel-Metal Hydride (NiMH)
Drifttemperatur (TT):	0 - 40 °C
Laadstroom:	8 A
Utsläppskapacitet:	5 W
Urladdningsström:	100 - 3000 mA