IFM AC1324 Bruksanvisning

IFM Inte kategoriserad AC1324

Läs gratis den bruksanvisning för IFM AC1324 (9 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3.5 recensioner. Har du en fråga om IFM AC1324 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

Installation instructions

AS-i Controllere

AC1318

AC1324

7390779 / 01 05 / 2011

1 2345

1 Functions and features

• The controllere (AC1318 / AC1324 ) integrates one or two AS-i masters, both

according to the AS-i version 3.0, a mini controller and a DeviceNet interface.

• It controls the exchange of data to the sensor / actuator level

• processes the peripheral data in the integrated processor (signal preprocess-

ing),

• works as stand-alone controller with exchange of data to the PC (visualisation),

• communicates with the higher control level (in the gateway mode).

2 Programming interface RS232C

• Baud rate 4,800 to 115,200 baud

• Max. distance between controllere and PC: 20 m

• Potential separation from the controllere power supply

• Programming cable E70320 for connection to PC required

Contents

1 Functions and features 2 ........................................................................................

2 Programming interface RS232C 2 ..........................................................................

3 DeviceNet interface 3 .............................................................................................

4 Installation............................................................................................................3

5 Electrical connection 3 ............................................................................................

6 Operating and display elements 4 ..........................................................................

6.1 LED indicators and pin connection 5 ................................................................

6.2 Contrast setting 6 .............................................................................................

7 Operation .............................................................................................................6

7.1 Menu overview 6 ..............................................................................................

7.2 Menu navigation 7 ............................................................................................

3 DeviceNet interface

• Baud rate 125 k, 250 k and 500 kbit / s

• Max. distance between controllere and host: depending on the baud rate

• Potential separation from the controllere power supply

• Up to 64 controllers connected in parallel

• Pin connection:

Pin 1: V-; Pin 2: CAN_L; Pin 3: Shield; Pin 4: CAN_H; Pin 5: V+

4 Installation

Fix the controllere onto a 35 mm DIN rail which has an electrically safe ground

connection. The protection rating of the unit is IP 20, therefore it should be

mounted in a protected location (e. g. control cabinet).

Ensure a condensation-free environment. Avoid excessive dust, vibration

and shock. The air circulation through the vents must not be impeded.

Avoid installation in direct vicinity of frequency inverters.

5 Electrical connection

Disconnect the installation from power. Connect the unit as indicated on the

terminals. Never connect the minus potentials to each other or the minus

potentials to the FE connection. Ensure an electrically save ground connec-

tion between AS-i controllere (terminal FE) and ground of the unit.

Disconnect the power supply before connecting the controllere.

To operate an AS-i system a special AS-i power supply is required. Connection is

made to the terminals AS-i + and AS-i -.

The AS-i system is operated ungrounded. AS-i + and AS-i - are to be

symmetrical to the ground potential of the installation.

Ensure a low-resistance connection of the symmetry point of the AS-i

power supply (terminal "shield") to the ground of the installation.

Supply the controllere with an additional 24 V DC voltage (20...30V PELV). The

connection is made to the terminals +24 V and 0 V.

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	AC1324
Färg på produkten:	Zwart
Vikt:	920 g
Bredd:	77 mm
Djup:	226 mm
Höjd:	311 mm
Förpackningens vikt:	1880 g
Förpackningens bredd:	267 mm
Djuppackning:	230 mm
Förpackningshöjd:	315 mm
Typ av anslutningskontakt:	3.5 mm/6.35 mm
Antal USB 2.0-portar:	1
Mikrofon, linjeingång:	Ja
Equalizerinställningar:	Ja
Frekvensomfång:	20 - 20000 Hz
Antal band equalizer:	3
Samplingshastighet:	12 kHz
Antal kanaler:	6 kanalen
Total harmonisk distorsion (THD):	0.0025 procent
Bearbetar digitalt ljud:	- Bit