IFM AC2751 Bruksanvisning

IFM Inte kategoriserad AC2751

Läs gratis den bruksanvisning för IFM AC2751 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om IFM AC2751 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

Operating instructions

AS-i PCB module

AC2750

AC2751

AC2752

AC2753

80285129/00 04/2019

1 Preliminary note

An instruction is indicated by "►".

Example: ► Mount the unit as shown.

Important note

Non-compliance can result in malfunction or interference.

2 Safety instructions

• Please read the operating instructions prior to set-up of the device.

• Ensure that the product is suitable for your application without any restrictions.

• The unit conforms to the relevant regulations and EC directives.

• Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application.

• Installation, electrical connection, set-up, operation and maintenance of the

unit must only be carried out by qualified personnel authorised by the machine

operator.

3 Functions and features

The AS-i module functions as digital I/O slave in the AS-i system and is exclusively

supplied via AS-i. It connects 4 sensors (2-wire sensors or 3-wire sensors) and

max. 4 actuators (pnp) with the AS-i master.

• Maximum number of modules per master: 62 (A/B slave)

• Watchdog function: If the connection to the master is interrupted for more than

40 ms, all outputs are disconnected.

• AS-Interface version 3.0, downward compatible

4 Installation

► Disconnect the system from power before installation.

► Install the module in a protected location, e.g. in a housing with at least IP 54.

Use the supplied adhesive pad or the DIN rail adapter E70432 (accessory) for

fixing.

► When using the adhesive pad, the surfaces must be kept free from dust, oil,

release agents and other kinds of contamination.

► Position the adhesive pad in the centre of the back of the PCB module.

► Carry out a set-up test after installation of the module.

5 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electrical equipment

must be adhered to.

► Disconnect the installation from power and connect the unit.

5.1 External protective circuitry for inductive loads

The switch-on and switch-off capacity for triggering solenoids is rated up to 2.5 W

(IEC 60947-5-1, utilisation category DC-13).

Recommendation: For inductive loads use a free wheel diode on the load.

5.2 Wiring

AC2750 (4 DI / 4 DO) / AC2751 (4 DI / 3 DO)

Connection cables

I1 WH (white)

I2 WH (white)

I3 WH (white)

I4 WH (white)

O1 YE (yellow)

O2 YE (yellow)

O3 YE (yellow)

O4 YE (only AC2750)

0- BK (black)

I+ RD (red)

AS-i - (FLT) BU (blue)

AS-i + (PWR) BN (brown)

Switching input sensor 1

Switching input sensor 2

Switching input sensor 3

Switching input sensor 4

Switching output actuator 1

Switching output actuator 2

Switching output actuator 3

Switching output actuator 4

Sensor and actuator supply 0 V

Sensor and actuator supply 24 V

AS-i -

AS-i +

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	AC2751
Färg på produkten:	Black, Stainless steel
Vikt:	5700 g
Förpackningens vikt:	18170 g
Förpackningens bredd:	361.95 mm
Djuppackning:	812.8 mm
Förpackningshöjd:	482.6 mm
Användarmanual:	Ja
Husmaterial:	Acrylonitrile butadiene styrene (ABS), Steel
Blåtand:	Nee
Typ av förpackning:	Doos
Anslutningsteknik:	Bedraad
Genomsnittlig effekt:	125 W
Certifiering:	CE, RoHS, UL1480A, UL2043
Hållbarhetscertifikat:	CE, RoHS
Antal per paket:	1 stuk(s)
Rekommenderad användning:	Universeel
Impedans:	8 Ohm
Ljudutgångskanaler:	- kanalen
Högtalarplacering:	Inbouw in de muur/plafond
Bashögtalare:	Ja
Frekvensomfång:	97 - 22000 Hz
Känslighet:	90 dB
Förstärkare:	Nee
Diameter woofer:	8 "
Diameter högtonenhögtalare:	1 "
Tweeter:	Ja
Crossover frekvens:	3000 Hz