IFM AY1020 Bruksanvisning

Läs gratis den bruksanvisning för IFM AY1020 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 5 recensioner. Har du en fråga om IFM AY1020 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

You can use this Quick Start for an overview of the AY1020 installation. For complete

installation and configuration information, download the device manual from the ifm.com

website.

Installation and connection

The device must be installed in a suitable housing protected against fire and electrical or

mechanical influences.

Connect the power and Ethernet cables according to the following table

Terminals Description Voltage RangeRemarks

V+, V-

24VDC

PWR IN

Power supply for modules and

sensors (A-ports via PWR Out

connectors)

18…30 V DC,

max. 4 A

Only use PWR connectors on one

side top OR bottom. Do not use

both at the same time.

L+, L-

PWR OUT

Port 1…8

Power supply (A-ports) for sen-

sors or actuators. Be aware of

the current limitations.

24 V DC,

max. 200 mA

If more current is needed for B-

port devices, take it directly from

the power supply.

Configuration

Configure IP address

You can use the following procedure with the IO-Link master embedded web interface to

configure the AY1020 network settings (administrative rights required).

Note: The AY1020 is shipped from the factory with the Admin account enabled without a

password.

►Open browser and enter IP address of the AY1020.

Note: The AY1020 default IP address is 192.168.1.250. You may need to change your

laptop or PC network address to the same network segment to access the web interface.

►Click on [Configuration] → [NETWORK].

►Click on the button [EDIT].

►Make any necessary network setting changes and click on [SAVE].

Connect and configure devices

►Connect the IO-Link and digital I/O devices

►Use the web interface to configure IO-Link, Ethernet/IP, and Modbus/TCP settings

–If necessary, confi gure the dedicated digital I/O ports.

–If desired, upload the appropriate IODD files for the IO-Link devices.

Operating instructions

IO-Link Master Ethernet/IP AY1020

Produktspecifikationer