IFM E2M250 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM E2M250 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 11 personer och betygsatt med 3.9 stjärnor i genomsnitt av 6 användare

Sida 1/8
UK
Operating instructions
MultiViewBox
E2M250
80260803 / 00 01 / 2017
3
UK
1 Preliminary note
1.1 Symbols used
Instructions
> Reaction, result
[…] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
1.2 Warnings used
CAUTION
Warning of personal injury
Slight reversible injuries may result�
8
6 Installation
CAUTION
The MultiViewBox is very heavy
Risk of injury if the MultiViewBox falls to the floor
Wear safety shoes during installation�
Installing the MultiViewBox:
1� Select a suitable installation location
> Do not install the MultiViewBox with connectors facing upwards�
> Avoid installation in heavily polluting areas of the machine
(e�g� splashing water, tyre abrasion, etc�)�
2� Bore holes for M5 screws�
> The hole dimensions are indicated in the data sheet and in the scale
drawing (→ 10)
3� Install the MultiViewBox with 4 x M5 screws�
> Choose M5 screws suitable for a solid base�
4� Connect the cables to the MultiViewBox
Only use ifm cables�
The cables must be provided with a strain relief�
Observe the minimum bending radius of the cables�
Cover unused connections with protective covers

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: E2M250

Behöver du hjälp?

Om du behöver hjälp med IFM E2M250 ställ en fråga nedan och andra användare kommer att svara dig