IFM E2M261 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM E2M261 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Installation instructions
E2M261
11313037 / 00 04 / 2020
UK
2
Items supplied
1 bag with connector parts
1 x shrinkable sleeve, black
5 x shrinkable sleeve, red
Overview of the supplied connector parts
1
2
3
4
6
5
7
1. Front seal
2. Connector housing / coupling ring
3. Female insert with solder connections
4. Cable clamp
5. Assembled O-ring
6. Seal for cable gland in 2 sizes (1 x
4-6 mm, 1 x 6-8 mm)
7. Pressing screw
i
The outer diameter of the cable must match the inner diameter of the seal.
Only use 1 seal for the assembly.
UK
3
Assembly
Strip 20 mm from the cable
20 mm
Strip 5 mm from the screening.
5 15 mm
Fold back the screening and thread on the pressure screw, seal and cable
clamp.
20 mm
Fold the screening back over the cable
clamp.
Cable insulation:
1. Strip coax cable.
2. Loosen the screening from the coax cable
and roll it together.
3. Slide the black shrinkable sleeve over the
screening and shrink it.
4. Slide the red shrinkable sleeve of the
screening and the coax cable and shrink
it.
Solder the cable ends to the female insert.
Cover the soldering points with 4 shrinkable sleeves and shrink them.
Press the connector together.
Using the shrinkable sleeves is necessary in order to insulate the cables and
to avoid short circuits.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: E2M261

Behöver du hjälp?

Om du behöver hjälp med IFM E2M261 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer