IFM E70585 Bruksanvisning
IFM
Inte kategoriserad
E70585
Läs gratis den bruksanvisning för IFM E70585 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4 recensioner. Har du en fråga om IFM E70585 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Installation instructions
FC insulation displacement connector
E70585
E70586
E70587
80271731/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose ( Functions and features).→
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
• If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
• Protect units and cables against damage.
3 Functions and features
E70585 / E70586
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the M12 socket.
• Current rating 4 A.
The connectors E70585 and 70586 differ in the orientation of the M12 socket
(keyway).
3
UK
E70587
The FC insulation displacement connector carries the AS-i voltage and the
external 24 V supply from the flat cable to the M12 socket.
• Current rating 4 A.
4 Wiring
1
3
E70586
1: AS-i +
3: AS-i -
1
3
E70585
1: AS-i +
3: AS-i -
5
1
3 4
2
E70587
1: AS-i +
2: AUX -
3: AS-i -
4: AUX +
5 Installation
►Disconnect power.
►Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
►Choose a flat mounting surface and fix the
device on it (mounting holes 2). The mounting
screws are not supplied.
2: mounting holes
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | E70585 |
Behöver du hjälp?
Om du behöver hjälp med IFM E70585 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Thetford
- Niceboy
- CEEM
- 3M
- Brabantia
- InvisibleShield
- Maxsa
- Gastronoma
- Amazfit
- Vishay
- Autotek
- TikkTokk
- Hawk-Woods
- TK Audio
- True & Tidy
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025