IFM E70598 Bruksanvisning
IFM
Inte kategoriserad
E70598
Läs gratis den bruksanvisning för IFM E70598 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM E70598 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
Installation instructions
FC insulation displacement connector
E70598
E70599
80271733/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose ( Functions and features).→
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
• If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
• Protect units and cables against damage.
3 Functions and features
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the round cable (open end).
• Current rating 4 A.
3
UK
4 Installation
►
Disconnect power.
►Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
2: core colours (brown AS-i + / blue AS-i -)
2
1
►Choose a flat mounting surface and fix the
splitter on it (mounting holes 3).
The mounting screws are not supplied.
3
►
Insert the yellow AS-i flat cable for the AS-i
voltage in the upper flat cable duct.
►Place the cable correctly in the profile slot.
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | E70598 |
Behöver du hjälp?
Om du behöver hjälp med IFM E70598 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- REVITIVE
- A3
- R-Vent
- Quadro
- Gastroback
- Topeak
- Fluance
- Lupine
- Jolin
- Doona
- Playtive
- Crem
- Club 3D
- Nearity
- Tube-Tech
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025