IFM E70599 Bruksanvisning
IFM
Inte kategoriserad
E70599
Läs gratis den bruksanvisning för IFM E70599 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 4 recensioner. Har du en fråga om IFM E70599 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
Installation instructions
FC insulation displacement connector
E70598
E70599
80271733/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose ( Functions and features).→
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
• If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
• Protect units and cables against damage.
3 Functions and features
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the round cable (open end).
• Current rating 4 A.
3
UK
4 Installation
►Disconnect power.
►Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
2: core colours (brown AS-i + / blue AS-i -)
2
1
►Choose a flat mounting surface and fix the
splitter on it (mounting holes 3).
The mounting screws are not supplied.
3
►Insert the yellow AS-i flat cable for the AS-i
voltage in the upper flat cable duct.
►Place the cable correctly in the profile slot.
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | E70599 |
Behöver du hjälp?
Om du behöver hjälp med IFM E70599 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Red Digital Cinema
- Fresh N Rebel
- Dorman
- Pigtronix
- NuPrime
- Flame
- EtherWAN
- Suprema
- Alfresco
- Wentronic
- Sure Petcare
- Steelbody
- Freeplay
- Cioks
- Hamstra
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025