IFM ID0013 Bruksanvisning

IFM Inte kategoriserad ID0013

Läs gratis den bruksanvisning för IFM ID0013 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 4 recensioner. Har du en fråga om IFM ID0013 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

Installation Instructions

Inductive Sensor

IDE

704286 / 00 09 / 2007

Function and features

This sensor detects metals without contact and indicates their presence by

providing a switched signal. Sensing range adjustable from 20 to 60 mm; (values

based on standard measurement with mild steel; a shorter sensing range for other

metals). In the event of variations of the ambient temperature in the range from

-25°C to +80°C the set switch point may fluctuate by ± 10%.

Installation

Screw the to a firm sensor

base. If there is high mechanical stress,

ensure that it cannot work loose.

Non-flush installation.

Open space around the sensing face when mounted in metal:

3 x S

2 x a 2 x aa

Minimum distance when several sensors of the same type are mounted:

8 x S

2 x a

Electrical connection

Disconnect power before connecting the sensor. Open the sensor; connect

cable in accordance with the instructions on the type label.

Note: insert a miniature fuse according to the technical data sheet, if specified.

Recommendation: check the unit for reliable function after a short cirucit.

Adjustment

LED

NO NC

1. Place the target material in the safe sensing range

→ → LED is lit. LED goes off.

2. Decrease the sensing range until

LED goes off.

Decrease the sensing range until

LED is lit.

3. Increase the sensing range until

LED is lit.

Increase the sensing range until

LED goes off.

Sensing distance should not be increased beyond 60 mm.

Operation

Check the safe functioning of the sensor. The LED is lit when the output is swit-

ched. The operation of the sensor is maintenance-free.

For perfect functioning make sure that:

• the sensing face and the open space are kept free of metal deposits and

foreign bodies, particularly for installation with the sensing face facing upwards.

• EMC: The unit conforms to the requirements of EN 60947-5-2.

potentiometer

sensing range

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	ID0013
Vikt:	3500 g
Ljudnivå:	30 dB
Typ av lampa:	P-VIP
Typiskt kontrastförhållande:	2500:1
Projektorns ljusstyrka:	3300 ANSI lumens
Projektionsteknik:	DLP
Projektorns inbyggda upplösning:	WXGA (1280x768)
Lämplig för skärmstorlekar:	0.74 - 7.62 "
Projektionsavståndsmål:	1.2 - 10.38 m
Antal färger:	16.78 miljoen kleuren
Frekvensområde horisontellt:	31.5 - 100 kHz
Frekvensområde vertikalt:	56 - 85 Hz
Antal HDMI-portar:	1
Ljuskällans livslängd:	2000 uur
Typ av ljuskälla:	Lamp
Zoomförhållande:	1.2:1
Nätförsörjning:	384 W
Lampkraft:	300 W
Bildförhållande:	4:3, 16:9
Anslutningar:	1x 15-Pin D-Sub\n1x DVI-I (HDCP)\n1x S-Video\n1x Composite Video (1x RCA)\n1x Component (3x RCA)\n1x USB\n1x RS-232
Enhetlighet:	85 procent
Mått (B x D x H):	350 x 282 x 119 mm
Digital keystone-korrigering:	+/- 16°