IFM ID0042 Bruksanvisning

Läs gratis den bruksanvisning för IFM ID0042 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 5 recensioner. Har du en fråga om IFM ID0042 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Installation Instructions
Inductive sensor
IDC
704291 / 00 09 / 2007
2
Function and features
This sensor detects metals without contact and indicates their presence by provi-
ding a switched signal.
Nominal sensing range (Sn): 50 mm;
flush installation).
(Values based on standard measurement with mild steel; a shorter sensing range
for other metals).
Installation
Mount the unit on a DIN rail or by means of a mounting fixture.
Three ways of mounting:
non-flush flush overflush
Open space around the sensing face when mounted in metal
3 x S
n
3-4mm
3-4mm
5mm
For all ways of mounting In addition for overflush mounting
3
UK
Minimum dista
8 x S
naaa Electrical connection
Disconnect power before connecting the sensor.
The plug adap
steps).
LEDs
loosen fastening nut turn plug adapter
tighten fastening nut
Note: insert a
Recommendat
Operation
Check the safeThe green LEDThe yellow LEThe operation
sure that:
the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwa
EMC: The unit conforms to the requirements of EN 60947-5-2.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: ID0042

Behöver du hjälp?

Om du behöver hjälp med IFM ID0042 ställ en fråga nedan och andra användare kommer att svara dig