IFM IG513A Bruksanvisning

Läs gratis den bruksanvisning för IFM IG513A (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM IG513A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Operating instructions
(Ex protection related part)
Inductive sensors
IG / II
80297014 / 00 09 / 2020
UK
UK
UK
UKUK
UK
2
Remarks for safe use in hazardous areas
Functions and features
Use in hazardous areas according to the classification
II 3D
(group II, category 3D, apparatus for dust atmosphere).
The requirements of the standards EN 60079-0 and EN 60079-31 are met.
Certificat d‘examen de type:
BVS 20 ATEX E 054 X
Certificat d‘examen IECEx de type:
IECEx BVS 20.0041X
Marking (see unit or technical data sheet)
II 3D Ex tc IIIC T80°C Dc X
Permissible operating temperature of the application (proper usage):
Ta: -20°C...+60°C
Installation / Set-up
The units must only be installed, connected and set up by qualified staff. The qualified staff
must have knowledge of protection classes, regulations and provisions for apparatus in
hazardous areas.
Check whether the classification (see „Marking“ above and marking on the unit) is suitable
for the application.
Installation remarks / Installation
Adhere to the respective national regulations and provisions as well as the relevant
installation regulations.
Avoid electrostatic charging on plastic units and cables.
To avoid electrostatic charging clean the unit with a damp cloth only. Rubbing with non-
conductive materials must be strictly avoided.
To avoid electrostatic charging steps must be taken to ensure the equalisation of potential
of metal parts (plug housing, fixing elements, protective housing, etc.).
Do not mount the unit in the dust flow.
Avoid dust deposits on the units.
Protect the units and the cables efficiently against damage.
For the connections and the electrical characteristics please see the unit marking or the
technical data sheet.
Avoid direct radiation with high UV components (sunlight). Mount the unit in a protected
place.
M12 plugs may only be opened or closed in a sufficiently clean environment.
3
The secure fit of the impact protection housing for the sensor must be checked depending
on the installation conditions (temperature, vibration,...) and at intervals to be defined by
the operator.
Special conditions for safe operation
The housing and housing parts made of plastic were tested with the supplied impact pro-
tection housing in accordance with EN 60079-0 for group II and for a low mechanical risk
with an impact energy of 4 joules.
For cable units a sufficient strain relief must be ensured and the cable must be firmly laid.
For units for which an additional fuse is requested, this fuse must be located outside the
hazardous areas.
The units must only be operated with the supplied impact protection housing for the
sensor.
24
Screw the impact protection housing onto the sensor manually until the end stop.
Screw the lock nut against the impact protection housing.
Turn the nut against the impact protection housing until the latter also starts to turn. Use
an appropriate spanner.
Maintenance / Repair
The unit must not be modified nor can it be repaired. In case of a fault please contact the
manufacturer.
If required, the technical data sheets and EC declarations of conformity can be obtained
from the manufacturer. Indicate the article number.
UK

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: IG513A
Färg på produkten: Zwart
Energieffektivitetsklass (gammal): A+
Fjärrkontroll: GA902WJSA
Skärm diagonal: 70 "
Upplösning: 1920 x 1080 Pixels
Original bildförhållande: 16:9
Ljudformat som stöds: AAC
Videoformat som stöds: DIVX, H.264, MPEG4
Ethernet LAN: Ja
Videolägen som stöds: 1080p
Integrerad minneskortläsare: Ja
Kompatibla minneskort: SD
Ljudsystem: Virtual/Dolby Surround
Ljusstyrka: - cd/m²
Antal USB 2.0-portar: 3
Antal HDMI-portar: 4
Audio-ingan (L, R): 2
PC-ljud ingång: Ja
Kompositvideoingång: 1
Komponenter för video (YPbPr/YCbCr): 1
Antal Ethernet LAN (RJ-45)-portar: 1
Inbyggda högtalare: Ja
Genomsnittlig effekt: 20 W
Strömförbrukning (i standby): 0.10 W
Antal högtalare: 2
Hörlursutgångar: 1
Analog signalformat: NTSC, PAL, SECAM
HD typ: Full HD
RS-232 port: 1
3D: Ja
HDMI: Ja
Grafikupplösningar som stöds: 1920 x 1080 (HD 1080)
VESA montering: Ja
Panelmonteringsgränssnitt: 400 x 400 mm
Djup (utan bas): 89 mm
Höjd (utan bas): 975 mm
Bredd (utan bas): 1613 mm
PC-ingang (D-Sub): Ja
Digitalt ljud, optisk utgång: 1
Common Interface Plus (CI+): Ja
Typ av tuner: Analoog & digitaal
Digitalt signalformat: DVB-T, DVB-T2
Enhetsbredd (med stativ): 1613 mm
Djupenhet (med stativ): 333 mm
Enhetshöjd (med stativ): 1008 mm
Vikt (med stativ): 43000 g
Lokal nedbländning: Nee
Digital Living Network Alliance (DLNA) certifierad: Ja
Text-TV: Ja
På/av timer: Ja
Elektronisk TV-guide: Ja
Gemensamt gränssnitt (CI): Nee
Antal RF-portar: 2
Bakgrundsbelysning: Ja
Teletekst: 2000 pagina's
Antal SCART-portar: 1
Marknadsföringsnamn dynamiskt kontrastförhållande: Mega Contrast
Fjärrkontroll ingår: Ja
Wifi: Ja
Strömförbrukning (typiskt): 136 W

Behöver du hjälp?

Om du behöver hjälp med IFM IG513A ställ en fråga nedan och andra användare kommer att svara dig