IFM IM8504 Bruksanvisning

IFM Inte kategoriserad IM8504

Läs gratis den bruksanvisning för IFM IM8504 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM IM8504 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

Installation Instructions

Inductive sensor

IME non flush

704288 / 00 09 / 2007

UKUK

Function and features

This sensor detects metals without contact and indicates their presence by provi-

ding a switched signal. The nominal sensing range (Sn) can be seen in the type

designation on the type label on the unit; operating distance (Sa) 0 ... 0,81 x Sn;

(values based on standard measurement with mild steel; a shorter sensing range

for other metals).

Installation

Screw the proximity switch to a firm

base. If there is high mechanical stress,

ensure that it cannot work loose (fig. 1).

Non-flush installation.

Open space in front of the sensing

face when mounted in metal: fig. 2

and 3.

Minimum distance when several

sensors of the same type are

mounted: fig. 4 and 5.

•

9mm

3 x Sna2 x a2 x a

8 x Sn

2 x aa a

2 3

4 5

Electrical connection

Disconnect power before connecting the sensor. Open the sensor (fig. 6);

connect cable in accordance with the instructions on the type label.

Note: insert a miniature fuse according to the technical data sheet, if specified.

Recommendation: check the unit for reliable function after a short cirucit.

Programming of the output function:

Units which are not programmed by means of connections are provided in N.O.

Open the wire link for programming the N.C. function (fig. 7A).

Aufkle er (B)b

sti ker (B)c

a c auto oll nt (B)

Aufkle er (A)b

sti ker (A)c

a c auto oll nt (A)

Alignment of the sensing face

Remove the sensor cube (fig. 7); align sensing face and re-insert the sensor cube.

When the sensor is mounted on a metal surface, the face of the cube marked by a

sticker (A) must point to this metal surface.

When the sensor has been screwed together, position the marking sticker

provided on the outer surface of the sensor unit so that the sensing face is

marked.

Operation

Check the safe functioning of the sensor: The LED is lit when the supply voltage

is applied.

The operation of the sensor is maintenance free. For perfect functioning make

sure that:

the sensing face and the open space are kept free of metal deposits and

foreign bodies, particularly for installation with the sensing face facing upwards.

EMC: The unit conforms to the requirements of EN 60947-5-2.

•

6 7

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	IM8504
Färg på produkten:	Zwart
Vikt:	1050 g
Bredd:	373 mm
Djup:	124 mm
Höjd:	43.7 mm
Förpackningens vikt:	2166 g
Husmaterial:	Glass, Plastic
Färg:	Ja
Internationell säkerhetskod (IP):	IP65
Skärm diagonal:	4.3 "
Stemcodecs:	G.711a, G.711u
Anslutningsteknik:	Bedraad
Videolägen som stöds:	720p, 1080p
Synfältsvinkel (FOV).:	120 °
Maximal bildfrekvens:	30 fps
fingeravtrycksläsare:	Ja
Högtalare:	Ja
Inbyggda högtalare:	Ja
Antal högtalare:	1
Megapixlar:	2 MP
Inbyggd mikrofon:	Ja
Displayteknik:	LCD
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksprotokoll som stöds:	ISAPI, RTSP, SNMPv1, v2, v3
Webbaserad hantering:	Ja
Brusreducerande effekt:	Ja
Ethernet-gränssnittstyp:	Gigabit Ethernet
Utedel ingår:	Ja
Strömförbrukning (typiskt):	13 W
Drifttemperatur (TT):	-30 - 60 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Avstängning av ultraljud:	Ja