IFM IN506A Bruksanvisning

IFM Inte kategoriserad IN506A

Läs gratis den bruksanvisning för IFM IN506A (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6.5 recensioner. Har du en fråga om IFM IN506A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

Operating instructions

(Ex protection related part) for inductive sensors

according to EU directive 2014/34/EU annex VIII (ATEX)

group II, equipment category 3D/3G

IN507A

704238 / 01 01 / 2017

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN 60079-0 and EN 60079-31 are met.

• Use in hazardous areas according to the classification

II 3G

(group II, category 3G, apparatus for gas atmosphere).

The requirements of the EN 60079-15 standard are met.

• Marking (see unit or technical data sheet):

II 3D Ex tc IIIC T80°C Dc IP67 X

II 3G Ex nA IIC T6 Gc X

• Permissible ambient temperature of the application (proper usage) (see unit or technical

data sheet):

-20°C 60°C≤ Ta ≤

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see "Marking" above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

• For the connections and the electrical characteristics please see the unit marking or the

technical data sheet.

• To avoid soiling, do not remove the connector cover until attaching the socket.

• Protect the unit (plastic parts) from UV light.

Special conditions for safe operation

• The unit (1) must only be installed in conjunction with the supplied protective housing (2).

• Use the supplied mounting plate (4) to ensure a secure fit of the mounting screws (5).

1. Proximity sensor.

2. Protective housing.

3. Socket EVC**A (accessory to be orde-

red separately).

4. Mounting plate.

5. Mounting screws (supplied with the

unit).

• Attach the connection cable (3) and tighten firmly before mounting.

• Use sockets which are suited for hazardous areas, e.g. ifm sockets EVC**A with Ex

certificate (certificate number BVS 08 ATEX E 109 U).

• Secure the sockets by tightening the hexagon coupling nut sufficiently according to the

requirements of the Ex protection related operating instructions of the socket.

• Do not disconnect the connector while live.

• The housings are rated for a low mechanical risk and tested with an impact energy of 4

joules.

• The sensing face is not designed for mechanical stress. Therefore the unit must only be

operated with target pucks which exclude mechanical stress on the sensing face.

• Tightening torque of the mounting screws MA = 1 Nm (±10%).

Maintenance / Repair

The unit must not be modified nor can it be repaired. In case of a fault please contact the

manufacturer.

If required, the technical data sheets and EC declarations of conformity can be obtained

from the manufacturer. Indicate the article number.

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	IN506A
Enhetsplacering:	Vrijstaand
Typ av operation:	Touch
Färg på produkten:	Black, Stainless steel
Vikt:	125000 g
Bredd:	900 mm
Djup:	695 mm
Höjd:	1790 mm
Nettoskatt:	- W
Ismaskin:	Ja
Ljudnivå:	43 dB
Energie-efficiëntieklasse:	F
Årlig-energiförbrukning:	416 kWu
Förpackningens vikt:	142000 g
Förpackningens bredd:	960 mm
Djuppackning:	770 mm
Förpackningshöjd:	1830 mm
Energieffektivitetsklass (gammal):	F
Frys nettokapacitet:	128 l
Fryskapacitet:	10 kg/24u
Kylskåpets nettokapacitet:	413 l
No Frost (kylskåp):	Ja
Multi-luftvägssystem (kylskåp):	Ja
Antal hyllor i kylskåp:	3
Antal-grönsakslådor:	2
Frysläge:	Onder
No Frost (frys):	Ja
Retentionstid vid strömavbrott:	12 uur
Snabbfrysfunktion:	Ja
Antal fryshyllor:	2
antal stjärnor:	4*
Total nettokapacitet:	569 l
Automatisk avfrostning (kylskåp):	Ja
Hyllmaterial:	Glas
Kylskåpsdörrfickor:	6
Larm för öppen dörr:	Ja
Klimaatklasse:	T
Hållbarhetscertifikat:	ENERGY STAR
Vattendispenser:	Ja
Vattenfilter:	Ja
Produktdesign:	Frans deur
AC-ingångsspänning:	220 - 240 V
Energieffektivitetsskala:	A tot F